Hampshire · England

Inhurst Window Mastic

Professional window mastic in and around Inhurst, with every bit of old sealant taken out first and a 12-month guarantee.

  • Cracked sealant at the sill ends
  • Water coming in at the bottom corners of a door
  • Mastic that has split away from the wall

Window mastic for Inhurst homes and businesses

How we handle window mastic in Inhurst

The mastic around a window or door seals the gap between the frame and the wall. Once that seal fails, wind and rain find the gap. Our applicators cut it out and replace it with a flexible, weatherproof sealant. We work on timber windows & doors, aluminium frames and window sills, and people most often call us about leaking joints at the ends of sills and water coming in at the bottom corners of a door.

Mastic can only go onto a dry, clean joint, so window work in Inhurst is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Applicator reaching up to seal an external door frame on a sunny day
Where
Inhurst (RG26)
Wider area
Hampshire
Guarantee
One year on every job
Quote
A clear quote up front
Call
0345 464 0079
Page updated
26 October 2026

What affects the quote in Inhurst

The price is agreed before any work begins. It’s based on:

  • How many rooms, windows or areas are involved
  • Which sealant suits the joint
  • Whether old sealant or filler has to be cut out
  • The number and length of the joints

We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.

What to tell us for a quote

When you contact us, these details help:

  • The type of property
  • Any previous sealing or DIY work
  • The address or postcode of the job
  • Access, such as stairs, a lift or height

If you are in Inhurst and need window mastic, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.

What we’re called out for in Inhurst

Sun, frost and rain wear sealant out. Sunlight dries the surface out, and over the years it loses its give, cracks and comes away.

These are the problems we’re asked about most:

  • Sealant in the wrong colour for the frame
  • Whistling draughts around closed windows
  • Draughty joints inside around the window
  • Damp patches on the reveal after heavy rain

Homes close to Saint Mary's Church include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.

Before booking anyone

  • Which sealant they’ll use, and why
  • How the surfaces are prepared before sealing
  • Which colour the sealant will be
  • What the cure time is

Our hiring checklist

Inhurst: your questions answered

Do you cover smaller places like Inhurst?

Yes. Inhurst is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

I let a flat near Midgham station. Can you help?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.

Can you do several jobs on one visit?

Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

What should I tell you?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

Can you do upstairs windows?

Yes, if safe access is possible. Higher or awkward frames may need extra access, and we will confirm what’s needed.

Can you seal over the old sealant?

No. The old sealant always comes out first, so the new sealant bonds properly.

Do you do commercial work?

Yes. We have worked for hotels, offices and other businesses, and we are fully insured.

Do you hold any approvals?

Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.

Surface by surface

uPVC windows

Fitters’ mastic on plastic frames is sometimes thin and rushed. It comes out, deep gaps get backing rod and the joint is resealed.

Timber windows & doors

Where timber has rotted at the joint, it needs repairing first. If we find rot, we’ll tell you before going ahead, as a joiner will need to deal with it.

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Clean frames with a soft cloth and soapy water
  • Ventilate rooms so frames do not stay wet inside
  • Paint up to the joint, not over it
  • Keep timber frames painted

Keep sill grooves and drainage slots clear, so water can run away instead of sitting against the joint.

A small gap around a frame only grows. As old mastic keeps shrinking, the gap widens, and a cold room gets colder. A new joint closes it up.

What sealant work cannot fix

New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:

  • Damp problems in the wall away from the window
  • Broken hinges, locks or handles
  • Worn gaskets, brush seals or a door that has dropped

If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before you book.

Joints and surfaces we work on

  • Composite doors
  • Patio & French doors
  • uPVC windows
  • Window sills
  • Timber windows & doors
  • Aluminium frames

Landlords, agents and businesses in Inhurst

A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.

We also work for property managers and facilities teams in Inhurst and across Hampshire. We can quote a run of properties together, and we’re fully insured for the work.

Inhurst homes and the weather

The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

If you let a flat or house near Midgham station, cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets. For site and facilities teams at buildings such as The Hurst School, its window and door frames need their mastic kept sound, just like a home’s.

Inhurst is about 2 miles west of Tadley, in Hampshire. Homes, rented property, offices and hotels in Inhurst can book us for window mastic. The work is guaranteed for a year. Inhurst is one of 683 places in Hampshire where we work. There’s also a page for Reading, roughly 11 miles from Inhurst.

Every address in RG26 is covered for window mastic. Window mastic is available to properties on Inhurst Lane, Stokes Lane and Brimpton Road. Other places close to Inhurst include Heath End (1 mile north-east), Baughurst (1 mile south-east), Axmansford (1 mile south), Brimpton Common (1 mile north-west) and Tadley (2 miles east). Within a short drive, we also cover Basingstoke (7 miles south-east), Yateley (15 miles east), Hook (11 miles south-east), Popley (6 miles south-east), Kempshott (8 miles south) and Oakridge (7 miles south-east).

What’s near Inhurst

Typical jobs here are in homes near Burnham Copse Primary School. The closest station to Inhurst is Midgham station, about 2.8 miles north of the centre. Other landmarks nearby include Park Prewett Hospital (5.8 miles south-east) and Calleva Museum (3.5 miles east). The countryside around Inhurst includes Thatcham Reed Beds.

Map of Inhurst © OpenStreetMap contributors

How it works

Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours for a handful of frames, longer for a whole house. Somewhere as small as Inhurst, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We check how each frame can be reached safely.
  2. All the failed sealant is cut away, along with any loose debris.
  3. The surfaces are cleaned and left dry, and primed where the sealant calls for it.
  4. Backing rod fills deep voids and the sealant goes in on top.
  5. We tool the joint so water runs off, then clear up.

How to prepare

  • Clear items away from the joints we are working on
  • Plan for the work area to be out of bounds to pets and children
  • Tell us about access, such as stairs, a lift or high-level joints

Get a quote

The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.

Get a quick quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job