Highland · Scotland

Galltair Sand Mastic

Traditional burnt sand mastic around sash and case windows and doors in stone and brick for Galltair, backed by a one-year guarantee. Call for a quick quote.

  • Cracked mastic round a front door frame
  • Cement or filler used on old window joints that has cracked
  • Mastic worn away on windows facing the weather

Sand mastic in Galltair

Landlord and commercial work in Galltair

Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.

For anyone letting property in or around Galltair, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.

Sand mastic in Galltair

Our applicators renew the sand mastic around sash and case windows and doors set in stone or brick. The old mastic is raked out, the joint is prepared and new mastic is shaped by hand. If you have a silicone bead on a sash window that spoils the look and gaps where the frame meets the masonry, we can put it right.

In and around a place like Galltair, homes range from older stone-built cottages to newer houses. Wind-driven rain finds any gap around a frame or sill, so the mastic there works hard.

All our work comes with our 12-month guarantee, wherever you are in Highland.

Where
Galltair (IV40)
Region
Highland
Cover
One year on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

What affects the cost of sand mastic

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • Any working-time requirements on site
  • Any mould that needs treating
  • The number and length of the joints
  • The number of rooms or windows

A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.

Helping us quote

Photos help, but a description is a good start. Please mention:

  • Whether it’s a home or a business
  • If someone has resealed it before
  • How we’d reach the joints
  • Photos by email, if that’s easy

We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.

What we can’t put right

Some problems need a builder, plumber or other trade rather than us:

  • Timber that has rotted
  • Cracked or broken glass
  • Whether work needs listed building consent

Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before booking.

What we seal

  • Timber door frames
  • Brick reveals
  • Period & listed homes
  • Stone surrounds
  • Sash and case windows
  • Tenement windows

What happens if it’s left?

Draughts round a sash window are not always the sashes. Gaps between the frame and the wall can be just as bad, and renewing the mastic closes them. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Why Galltair clients choose us

  • Trusted Arbo and Everbuild sealants
  • We never seal over old sealant
  • Anti-fungal sanitary silicone in wet areas
  • 20+ years of sealant experience

Read how sealant jobs are priced and what customers say.

Signs you need sand mastic in Galltair

Timber swells and shrinks with the weather. That movement opens up the mastic joint little by little.

Keep an eye out for these signs:

  • Gaps where the frame meets the masonry
  • Mastic that needs renewing before redecorating
  • Mastic round period door frames that has failed
  • Wind and rain getting in round a sash window

Managing a site like Bernera School? Then its window and door frames need their mastic kept sound, just like a home’s.

What your quote should include

  • How hidden problems are handled
  • What the cure time is
  • Is VAT in the price?
  • The length of the guarantee

Choosing a sealant specialist

How the visit works

Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes anything from a few hours to a full day, depending on how many windows, depending on the size of the job. For a place like Galltair, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. Each surround is checked first.
  2. We rake out the old mastic and clean the joint.
  3. We fill deep gaps so the new mastic is not too thick.
  4. New sand mastic is applied and shaped by hand.
  5. We finish the mastic to a tidy line.

Before we arrive

  • Move anything stored near the joints
  • Tell us about any water getting in
  • Let us know about earlier repairs to the joints

How to get a quote

If you’re in Galltair and need sand mastic, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.

Get a price

Advice

Sand mastic in Galltair: local notes

Galltair is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on the mastic around older windows and doors, especially on the side facing the sea. Sash and case windows are common in older Scottish homes, often pointed into the wall with traditional sand mastic.

Around Galltair, as everywhere, sand mastic is only as good as the preparation behind it.

Galltair is in Highland. Wherever you are in the IV40 postcode area, we can carry out sand mastic at your property. Our Highland coverage runs to 253 places, and Galltair is one of them.

Jobs for sand mastic in IV40 is quoted and booked the same way as anywhere else. We also cover the places around Galltair: Glenelg (1 mile south-east), Glen More (2 miles east), Reraig (4 miles north), Auchtertyre (5 miles north) and Balmacara (5 miles north). Remote and island addresses need a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.

Local landmarks in Galltair

In Galltair, that means homes and buildings near Glenelg Inn and the streets around them. The countryside around Galltair includes Loch an t-Seachrain and Glas Bheinn.

Map of Galltair © OpenStreetMap contributors

Galltair questions

Is sand mastic in a coastal place like Galltair any different?

Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are generally the first to need attention.

Do you cover smaller places like Galltair?

Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Should I use sand mastic or silicone?

Sand mastic normally suits period timber windows best. On modern frames, we’d normally use a flexible sealant, and we will explain why.

Do you remove the old sealant?

Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.

Do you have insurance?

Yes. We are fully insured, and we have been doing sealant work for more than 20 years.

Is it messy?

Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.

What do you put in the joint?

We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will explain our choice.

Can sand mastic be painted?

Traditional guidance is not to paint over sand mastic. Ask us before you decorate around it and we’ll advise.

Should I try it myself first?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job