Hampshire · England
Remedial sealant & repairs in Worting, Hampshire
Specialist remedial sealant for Worting: careful preparation, the right product and tidy work. Call for a quick quote.
- A second bead peeling off the first
- A shower that leaks however often it’s resealed
- Thick, messy sealant smeared over tiles
What affects the cost of remedial sealant
We do not publish a price list, because jobs vary so much. The quote depends on:
- The type of sealant required
- Access and height
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
Helping us quote
You do not need to know the technical terms. It helps if you can tell us:
- If someone has resealed it before
- The problem you’ve noticed
- Photos by email, if that’s easy
- Access, such as stairs, a lift or height
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job, and we will take it from there.
About our remedial sealant in Worting
Water on the floor doesn’t always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. When the fault is elsewhere, we say so instead of resealing for the sake of it. If you’re dealing with over-sealed joints coming away and sealant peeling off a dusty or damp surface, we can help.
Homes around Worting range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Where
- Worting (RG22, RG23)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Why it’s worth doing now in Worting
Leaks that are left keep doing damage out of sight: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. In a smaller place like Worting, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, phone 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
Why book with us
- Rated 4.9 stars on Google
- Arbo and Everbuild products
- Any old sealant cut out fully, not covered over
- White, clear, grey or coloured to suit, where the product allows
Read our cost guide or our reviews.
What we do, step by step
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most joints, depending on how much old sealant has to come out. Parking around Worting is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
How to prepare
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
- Mention if the joints have been sealed before
Ask for a quote
We quote each job on its own. Simply call 0345 464 0079 or email us and describe the job and send pictures if you have them.
Read more
When something else is needed
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Movement from fittings that aren’t supported
- Water damage behind tiles that needs a tiler
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before booking.
Joints and surfaces we work on
- Shrunken worktop sealant
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
What remedial sealant looks like in Worting
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Thomas A Becket, timber floors under older bathrooms flex, so joints need a sealant that moves with them. If you look after a building such as Chiltern Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Basingstoke station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Worting is about 2 miles west of Basingstoke, in Hampshire. Every kind of property in Worting is covered for remedial sealant, old or new, large or small. The work is guaranteed for a year. Worting is one of 683 places in Hampshire where we work. We also work in Reading, around 15 miles away.
Every address in RG22 and RG23 is covered for remedial sealant, from the main roads to the quietest streets. You will find streets such as Warham Road, Church Lane and Wayside Road. We also cover the places around Worting: Buckskin (1 mile south-east), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Newfound (1 mile west). Within a short drive, we also cover Fleet (13 miles east), Andover (15 miles west), Alton (10 miles south-east), Yateley (14 miles east), Tadley (6 miles north) and Hook (8 miles east).
Around Worting
Typical jobs here are in homes near The White Hart Inn, Bishop Challoner Catholic Secondary School and Coppice Spring School, among other places. The closest station to Worting is Basingstoke station, roughly 2.1 miles east of the centre. Nearby you will also find Park Prewett Hospital (1.5 miles north-east) and Basing House (3.7 miles east). Green spaces nearby include Farleigh Hill and Daneshill Park Woods.
Nearby places to Worting
What else we do in Worting
Looking after it afterwards
So the new joints stay in good condition:
- Look for stains below bathrooms now and then
- Have loose fittings fixed before resealing
- Ask why a joint failed before redoing it
- Keep bleach and abrasives off the bead
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Worting questions
Will you come out to Worting?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Basingstoke station. Can you help?
Yes. We work for landlords and letting agents as well as householders. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.
Do you take out the old sealant first?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and you’ll get one quote.
Do you fix expansion and movement joints?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
Can you remove old sealant without damaging the bath?
Yes. Residue is removed with a product suited to the surface rather than scraped hard.