Hampshire · England
Fire-rated sealant in Worting, Hampshire
Fire rated sealant in Worting from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Open holes round services passing through fire walls
- Gaps filled with a product that isn’t fire-rated
- Damaged fire sealant left by other trades
Fire rated sealant in Worting, done properly
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. We cut out the wrong material and the gap is resealed with a product tested for that use. We work on door frames, flats & HMOs and service penetrations, and people most often call us about open gaps behind door architraves and ordinary sealant used where a fire-rated product was needed.
In a smaller place like Worting, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. The work is the same as in a big building, just on a smaller scale.
The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.
- Place
- Worting (RG22, RG23)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we’re called out for in Worting
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. Rushed fire stopping is common, especially where it was squeezed in at the end of a project.
People usually contact us when they notice one of these:
- Ordinary sealant used where a fire-rated product was needed
- Open holes round services passing through fire walls
- Door frames with gaps between frame and wall
- New service routes left unsealed after building work
If you look after a building such as Chiltern Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- How the surfaces are prepared before sealing
- Are they insured?
- Which colour the sealant will be
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We look at:
- Whether the work is at height
- The product the joint needs
- The size of the job
- Whether old sealant or filler has to be cut out
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or email us and we will give you an honest view and a quote.
Helping us quote
You do not need to know the technical terms. It helps if you can tell us:
- Any previous sealing or DIY work
- The type of property
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Keeping the joints in good condition
Looking after new joints is easy, and it makes a real difference:
- Photograph sealed gaps before they’re covered up
- Ask which product was used before you paint
- Keep the record of products and locations with your fire safety documents
- Include hidden areas like risers in routine checks
Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint and we’ll tell you which one you have.
An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
Landlord and commercial work in Worting
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
What we can’t put right
A few problems are outside what sealant work can do:
- Doors that aren’t fire doors in the first place
- Issuing a fire rating or certificate for a building
- Openings too large for sealant, which need batts, boards or another system
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
Surfaces we seal
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Plasterboard & masonry
- Door frames
Fire rated sealant around Worting
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For landlords with property near Basingstoke station, any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like Church of St Thomas A Becket are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Worting is about 2 miles west of Basingstoke, in Hampshire. From the centre of Worting to the outskirts, we cover fire rated sealant for every kind of property. Worting is one of 683 places in Hampshire we cover for fire rated sealant. Reading is on our list too, around 15 miles away.
We work across RG22 and RG23 for fire rated sealant and the streets around it. If you need fire rated sealant at a property on Warham Road, Church Lane and Wayside Road or anywhere close by, we can help. If you’re just outside Worting, we cover Buckskin (1 mile south-east), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Newfound (1 mile west). Larger places within reach include Fleet (13 miles east), Andover (15 miles west), Alton (10 miles south-east), Yateley (14 miles east), Tadley (6 miles north) and Hook (8 miles east).
Around Worting
Around Worting, our work takes us to homes and buildings near The White Hart Inn, Bishop Challoner Catholic Secondary School and Coppice Spring School, among other places. Worting’s nearest station is Basingstoke station, roughly 2.1 miles east of the centre. Well-known places in the area include Park Prewett Hospital (1.5 miles north-east) and Basing House (3.7 miles east). Not far away are Farleigh Hill and Daneshill Park Woods.
What happens on the day
Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take anything from a few hours to several days, depending on how many gaps there are. In a smaller place like Worting, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
How to prepare
- On commercial sites, let us know about site rules
- Tell us about any water getting in
- Let us know about earlier repairs to the joints
Getting a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and send you a clear quote before work begins.
Read more
What the job involves on each surface
Door frames
Behind most architraves is a gap between frame and wall. Where it’s open, we seal it to the product’s details for that gap size so the architrave can be refitted.
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Where a hole is bigger than the sealant’s tested range, it needs another approach and we will flag it.
Nearby places to Worting
Also in Worting
Worting: your questions answered
Do you cover Worting for fire rated sealant?
Yes. We work across London and the South East, and Worting is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Do you work for landlords with property near Basingstoke station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.
Where is Mr Mastic based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Do you offer different sealant colours?
We will suggest a colour to suit the surroundings. The product needed can limit the range.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
Can you give us a record of the work?
Yes. Every gap we seal is listed with the product used, so you have it on file.
How long does the job take?
It depends on the size of the job, but as a guide it takes from a few hours to a few days, depending on the number of gaps and the access. We will give you a better idea when we quote.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.