Kent · England
Wingham Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right in Wingham, with a one-year guarantee on every job. Call for a quick quote.
- Movement joints that have split or pulled away
- Black mould underneath the bead
- Kitchen joints letting water behind the worktop
Remedial sealant in Wingham: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Rented homes near Adisham station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. Schools such as Wingham Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as St Mary's Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Wingham is about 6 miles east of Canterbury, in Kent. Every kind of property in Wingham is covered for remedial sealant. Every job comes with our one-year guarantee. Wingham is one of 922 places in Kent where we work. Our Chelmsford page covers work nearby (45 miles or so).
Here we cover the CT3 postcode area for remedial sealant. Whether your property is on High Street, St Mary's Meadow and Harris's Alley or anywhere close by, we can help. Nearby, we also carry out remedial sealant in Broomhill (1 mile north), Well Head (1 mile south-east), Wingham Green (1 mile west), Wingham Well (1 mile south-west) and Shatterling (1 mile north-east). Further out, we also cover Canterbury (6 miles west), Margate (10 miles north-east), Dover (10 miles south), Folkestone (13 miles south), Ramsgate (10 miles north-east) and Broadstairs (11 miles north-east).
Around Wingham
In Wingham, that means homes and buildings near The Red Lion pub and the streets around them. The nearest railway station is Adisham station, roughly 2.3 miles south of the centre. Nearby you’ll also find St Martins Hospital (4.7 miles west).
Remedial sealant in Wingham
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. If you have torn expansion joints and a second bead peeling off the first, we can help.
Around Wingham, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If something isn’t right with it in that time, tell us and we will put it right.
- Where
- Wingham (CT3)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The process
We keep the work tidy and contained to the area we are working on, so you can get on with your day. Expect the work to take a few hours for most joints, depending on how much old sealant has to come out, and we tell you how long to leave it before we go. Somewhere as small as Wingham, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
Preparing for the visit
- Clear items away from the joints we’re working on
- Tell us if parking is tricky
- Mention any tricky access
Ask for a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Related advice
Landlord and commercial work in Wingham
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
How the job changes by surface
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning before resealing.
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, and silicone residue is cleaned off the tiles too. New sealant needs a fully clean surface.
What we cannot put right
New sealant can’t fix everything, and we’ll tell you before work begins. Sealant will not put right:
- Movement from fittings that are not supported
- A tray or bath that’s cracked
- Tiles that have come away from the wall
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
What we seal
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Shrunken worktop sealant
- Botched or over-sealed joints
Why deal with it now?
Leaks that are left keep doing damage out of sight: wet floors, stained ceilings and swollen worktops. By comparison, sorting the joint is quick. Around Wingham, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- 180+ five-star Google reviews
- Experience in homes, commercial sites and hotels
- An ARBOMaster approved applicator
- Colour picked to suit the job
See what affects the cost and customer reviews.
How we quote for remedial sealant
The price is agreed before any work begins. It’s based on:
- When we can work, for business premises
- How much old sealant there is and how hard it is to remove
- Which sealant suits the joint
- Any mould that needs treating
Leaving a failed joint normally makes the job bigger, not smaller. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us and we’ll give you an honest view and a quote.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- What the problem is, such as mould, gaps, leaks or cracking
- Where the job is, and your postcode
- A few photos by email, if you can
- The rough size of the job
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you are ready, ring 0345 464 0079 or email us.
Common questions in Wingham
Can you help a landlord with a rental near Adisham station?
Yes. We work for landlords and agents as well as homeowners, and several properties can go on one quote. You can phone 0345 464 0079 or email us with the details for a clear quote.
Is Wingham within the area you cover?
Yes. Wingham is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit.
Can you strip sealant from an acrylic tray safely?
Yes. We avoid heavy scraping and use the right cleaner for each surface, so the new sealant bonds cleanly.
Where do you work from?
We’re a Crawley-based firm. Our area covers South East England, London and Scotland.
Can you take off two layers of silicone?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We’ll tell you how long to leave the joint before we leave.
Can you fix a reseal that hasn’t worked?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.