Kent · England
South Stour Remedial Sealant
Our applicators work in South Stour on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Dark patches showing through the sealant
- Repeat leaks from the same joint
- Wide, uneven beads that look worse than the old ones
Remedial sealant in South Stour
A joint that keeps letting you down needs more than another bead. It helps to have photos when you call 0345 464 0079 or drop us an email. We work on shrunken worktop sealant, mouldy bath & shower sealant and expansion joints, and the jobs we see most are a shower that leaks however often it’s resealed and sealant applied over old sealant that has lifted.
Homes around South Stour are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
All of our work is guaranteed for twelve months, in South Stour and everywhere else we cover.
- Where
- South Stour (TN25)
- Wider area
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What remedial sealant looks like in South Stour
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Ashford International station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
South Stour is about 3 miles south-east of Ashford, in Kent. Every kind of property in South Stour is covered for remedial sealant, old or new, large or small. Every job comes with our one-year guarantee. Our Kent coverage runs to 922 places, and South Stour is one of them. There’s also a page for Crawley, roughly 47 miles from South Stour.
Work in TN25 works the same way as everywhere else we cover. We also cover the places around South Stour: Mersham (1 mile north-east), Sevington (2 miles north), Hinxhill Park (2 miles north), Ridgeway (3 miles north-east) and Hinxhill (3 miles north-east). Within a short drive, we also cover Ashford (3 miles north-west), Canterbury (14 miles north-east), Folkestone (11 miles east), Faversham (14 miles north), Hythe (8 miles east) and Davington (15 miles north).
Around South Stour
Typical jobs here are in homes near Poulton Wood, among other places. South Stour’s nearest station is Ashford International station, about 2.8 miles north-west. Well-known places in the area include William Harvey Hospital (2.4 miles north) and Ashford Designer Outlet (2.3 miles north-west). Green spaces nearby include Hatch Park.
What else we do in South Stour
Landlords, agents and businesses in South Stour
For anyone letting property in or around South Stour, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
Common problems we fix in South Stour
Movement tears sealant that is not designed for it. A bath that flexes, a tray that rocks or a building joint that opens and closes split any bead that is too stiff or too thin.
Signs it’s time to call us include:
- A shower that leaks however often it’s resealed
- Sealant applied over old sealant that has lifted
- Dark patches showing through the sealant
- Movement joints that have split or pulled away
If you look after a building such as Finberry Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
What to look for in a quote
- Whether you can choose the colour
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
What happens if it’s left?
Adding more sealant is the usual quick fix, and it rarely works. It can’t bond to what’s underneath, leaving the leak in place and one more layer to cut out later. In a small place like South Stour, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
Why us?
- 4.9 on Google from 180+ five-star reviews
- Domestic, commercial and hotel work
- A 12-month guarantee on all work
- Arbo and Everbuild products
Take a look at our cost guide or our reviews.
South Stour questions
Is South Stour in your area for remedial sealant?
Yes. Our work covers London and the South East, and South Stour is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Is South Stour within the area you cover?
Yes. South Stour is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you have insurance?
Yes. We’re fully insured, and we can confirm the details when we quote.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
What does remedial sealant cost?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Do the sealants smell?
Sometimes, a little. It fades as the sealant cures.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Surface by surface
Movement & expansion joints
Joints filled with mortar, grout or rigid filler can’t move. Where it can be raked out, we replace it with flexible sealant.
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. It needs fixing down first, and we’ll tell you if we find it.
When it is not the sealant
A few problems are outside what sealant work can do:
- A cracked shower tray or bath (that needs repair or replacing)
- Older mastics that may need an asbestos check before removal
- Water damage behind tiles that needs a tiler
If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
What we seal
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Expansion joints
- Failed movement joints
- Botched or over-sealed joints
Quotes for remedial sealant in South Stour
There’s no set price list, because jobs vary so much. What we look at:
- How easy the joints are to reach
- Working hours on commercial sites
- Mould in or behind the old joints
- The product the joint needs
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- Pictures of the joints, sent by email
- Where the property is
- How many joints, rooms or windows are involved
- What the problem is, such as mould, gaps, leaks or cracking
We quote each job on its own, so the first step is telling us about yours. Just call 0345 464 0079 or send us an email with the details and send photos if you have them.
What we do, step by step
A visit follows a simple pattern: we check the joints, protect the area around them, do the work and clear up. Most jobs take a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere as small as South Stour, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Getting ready for the visit
- Move anything stored near the joints
- Mention if the joints have been sealed before
- Tell us about any water getting in
How to get a quote
Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.