Kent · England
Floor Joint Sealing in South Stour
Floor joint sealing across South Stour and nearby, with every bit of old sealant taken out first.
- Concrete floor joints that have broken down
- Skirting caulk that keeps splitting
- Dirt and water collecting in open floor joints
Landlord and commercial work in South Stour
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Landlords and letting agents in South Stour can book us as well as householders. Sealant work between tenants keeps a property looking cared for.
Floor joint sealing in South Stour, done properly
Concrete floors in warehouses and units have joints that take heavy wear. Each is resealed with a floor-joint product suited to what runs over it. We work on concrete floor joints, thresholds and skirting boards, and the jobs we see most are grout cracking in a straight line across a floor and open joints around bathroom floor edges.
Somewhere as small as South Stour, new homes tend to be conversions, self-builds or a few houses rather than an estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
Whatever the size of the job, it’s backed by our one-year guarantee in South Stour and across Kent.
- Place
- South Stour (TN25)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
New sealant cannot fix everything, and we’d rather say so up front. Sealant won’t put right:
- Damaged concrete that needs breaking out and repairing
- Failed waterproofing under a wet room floor
- A tiled floor that needs relaying
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Commercial floors
- Skirting boards
- Wet room & bathroom floors
- Concrete floor joints
- Tiled floors
- Thresholds
The process
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours, depending on the length of joint in most cases. Somewhere as small as South Stour, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Old caulk, grout or sealant is removed from the joint.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
How to prepare
- Let us know about stairs, lifts or work at height
- Mention any leaks or damp you’ve noticed
- Let us know about parking restrictions
Ask for a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved and send you a clear quote.
Related advice
Keeping the joints in good condition
Aftercare is simple:
- Vacuum floor joints regularly to stop grit building up
- Walk round the room once a year and look at the edges
- Avoid sloshing water against skirting
- Don’t fill floor joints with caulk where they move or get wet
Keep heavy traffic off resealed concrete joints for the cure time we give you. Mark the area off so drivers avoid it while it cures.
Cracks along tile grout lines come back unless the movement is dealt with. A flexible joint added early helps protect the tiles themselves.
Joints and finishes in South Stour homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal.
Schools such as Finberry Primary School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early.
South Stour is about 3 miles south-east of Ashford, in Kent. Across the TN25 area, we can carry out floor joint sealing at your property. We cover 922 towns and villages across Kent, large and small. For nearby work, see our Crawley page, about 47 miles away.
All of TN25 is within our area for floor joint sealing, from the main roads to the quietest streets. We also cover Mersham (1 mile north-east), Sevington (2 miles north), Hinxhill Park (2 miles north), Ridgeway (3 miles north-east) and Hinxhill (3 miles north-east). Within a short drive, we also cover Ashford (3 miles north-west), Canterbury (14 miles north-east), Folkestone (11 miles east), Faversham (14 miles north), Hythe (8 miles east) and Davington (15 miles north).
Near you in South Stour
Around South Stour, our work takes us to homes and buildings near Poulton Wood. For rail, the closest station is Ashford International station, about 2.8 miles north-west of the centre. A little further out are William Harvey Hospital (2.4 miles north) and Ashford Designer Outlet (2.3 miles north-west). For a walk, there’s Hatch Park.
What the job involves on each surface
Thresholds
Thresholds take daily traffic, so the sealant has to be tough as well as flexible and tool it flush.
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. We reseal them with a sealant suited to wet areas.
Do you need floor joint sealing in South Stour?
Wheels crossing an unfilled concrete joint chip its edges. Pallet trucks and trolleys knock the edges away and the joint gets wider.
The most common problems we see are:
- Failed joint filler in concrete floors
- Failed seals where bathroom floors meet baths and panels
- Caulk that has cracked where the floor moves
- Cracked grout where a tiled floor needs a movement joint
For landlords with property near Ashford International station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- Whether you can choose the colour
- Which sealant they’ll use, and why
- Who does the work, and how experienced they are
- How long the guarantee is
Also in South Stour
Quotes for floor joint sealing in South Stour
We quote each job individually. These are the things that affect it:
- The size of the job
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
- The product the joint needs
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
- Whether it’s a home or a business
Want a quote for floor joint sealing? Please ring 0345 464 0079 or email us with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Questions from South Stour
Do you cover smaller places like South Stour?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is South Stour in your area for floor joint sealing?
Yes, South Stour is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Can you seal where the floor meets the bath panel?
Yes. Where a floor meets a bath panel, kitchen plinth or skirting in a wet area, we use a flexible silicone to keep mop water out.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you will get one quote.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Do you seal warehouse floor joints?
Yes. We reseal concrete floor joints in commercial and industrial units. The product is chosen for the traffic the floor takes.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.
Can I choose the sealant colour?
We help you choose a colour that suits. The product needed can limit the range.