Kent · England
Floor & skirting joints in Mersham, Kent
Professional floor joint sealing in and around Mersham, with old sealant always removed completely.
- Open gaps along the bottom of skirting boards
- Caulk that has cracked where the floor moves
- Grout used at the floor edge instead of sealant
About our floor joint sealing in Mersham
We seal floor joints in homes, offices and commercial buildings across Mersham. We start by checking the floor type and the joint, since that decides which sealant suits. Typical jobs include perimeter joints in tiled floors filled with grout and gaps at thresholds between rooms, on skirting boards, commercial floors and wet room & bathroom floors.
Work in a small place like Mersham just needs the journey and access planning, and once on site, the job is the same as anywhere.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Mersham (TN25)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of floor joint sealing
Some jobs are bigger than they look, and some smaller. The main factors:
- The size of the job
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- How many areas need sealing
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- How we’d reach the joints
- A few photos by email, if you can
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved and send you a clear quote.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Bouncy or failing floorboards
- Cracked or broken concrete slabs
- Movement too big for a sealant joint
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
What we seal
- Commercial floors
- Tiled floors
- Skirting boards
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Act on grout cracks that run in a straight line
- Don’t fill floor joints with caulk where they move or get wet
- Keep dirt out of the joints
- Don’t slide heavy items over sealed joints
Mop with a well-wrung mop rather than flooding the floor. Less water at the edges helps the joints last.
A gap under the skirting collects dust and lets draughts through. Sealing it keeps the room tidier.
Nearby places to Mersham
Also in Mersham
Work for landlords, hotels and businesses
For anyone letting property in or around Mersham, several properties can go on one quote. Just tell us the addresses and what each one needs.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Questions from Mersham
Can you do floor joint sealing in Mersham?
Yes. Our work covers London and the South East, and Mersham is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
I let a flat near Ashford International station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.
Can I add another job to the visit?
Of course. Doing several areas at once is usually more efficient.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.
Will I be able to paint over the new joint?
For painted skirting, we use a flexible product that can be painted. Silicone won’t take paint, so we use it where the joint stays unpainted.
My floor grout keeps cracking in a line. Can you help?
Often, yes. Straight cracks in grout often show where a movement joint was needed. We rake out that line and seal it with flexible sealant.
Is there any odour?
There can be a smell while the sealant cures. Opening a window helps.
Do I need to be at home?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
What the job involves on each surface
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. We reseal them with a sealant suited to wet areas.
Concrete floor joints
Old filler, dust and debris are cleaned out of the joint. Backing goes in where the depth needs controlling.
What floor joint sealing looks like in Mersham
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Rented homes near Ashford International station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant. If you look after a church, hall or community building such as Church of St John the Baptist, joints in its floors, skirtings and thresholds need resealing as they wear. If you look after a building such as Mersham Primary School, entrance and corridor floor joints take a lot of traffic.
Mersham is about 3 miles south-east of Ashford, in Kent. Every kind of property in Mersham can book us for floor joint sealing, old or new, large or small. The work is guaranteed for a year. Across Kent, we cover 922 places, and Mersham is one of them. Chelmsford is on our list too, about 47 miles from Mersham.
Our applicators cover all of the TN25 postcode area for floor joint sealing. That includes homes and businesses on Church Road, The Street and Church Close. If you are just outside Mersham, we cover Sevington (1 mile north-west), South Stour (1 mile south-west), Ridgeway (1 mile east), Hinxhill Park (2 miles north) and Smeeth (2 miles east). We also work in nearby towns such as Ashford (3 miles north-west), Canterbury (13 miles north-east), Folkestone (11 miles east), Faversham (14 miles north), Hythe (7 miles south-east) and Davington (14 miles north).
Around Mersham
In Mersham, that means homes and buildings near The Farriers Arms and Poulton Wood, among other places. For rail, the closest station is Ashford International station, about 2.9 miles north-west of the centre. Other landmarks nearby include Ashford Designer Outlet (2.6 miles north-west) and William Harvey Hospital (1.7 miles north-west). For a walk, there’s Hatch Park.
Leave it or put it right?
Water that gets past a floor joint can damage the floor beneath. Sealing them now keeps the problem at the surface. Older cottages and farmhouses around Mersham can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why choose Mr Mastic in Mersham
- Old sealant always removed completely
- A sealant colour to suit the surroundings
- White, clear, grey or another colour, product permitting
- ARBOMaster approved applicator
Read how sealant jobs are priced or our reviews.
How it works
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on the length of joint. For a village or hamlet like Mersham, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- We apply the sealant in a colour that suits the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
How to prepare
- Mention any tricky access
- Mention any leaks or damp you’ve noticed
- Mention if the joints have been sealed before
Getting a quote
Every job is quoted individually, so the first step is telling us about yours. Simply call 0345 464 0079 or email us and describe the job.