Kent · England
Floor & skirting joints in Ridgeway, Kent
Floor joint sealing across Ridgeway and nearby, with old sealant always removed completely.
- Grout cracking in a straight line across a floor
- Worn sealant at door thresholds
- Rigid edge joints in tiled floors
Why deal with it now?
Open joints along wet floors let water into the subfloor and behind skirting. Dealing with it early keeps the repair to the joint. Around Ridgeway, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why book with us
- More than 20 years in sealant work
- Anti-fungal silicone where joints get wet
- Every job guaranteed for a year
- Colour picked to suit the job
Read our cost guide and what customers say.
About our floor joint sealing in Ridgeway
Wet-area floor joints keep water out of the gap behind skirting and plinths. We seal them with a flexible, water-resistant sealant and stops dirt collecting. We’re often asked to deal with skirting that has pulled away from the floor and concrete floor joints that have broken down, on tiled floors, commercial floors and wet room & bathroom floors.
Somewhere as small as Ridgeway, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.
Our work is backed for twelve months, in Ridgeway and everywhere else we cover.
- Place
- Ridgeway (TN25)
- Region
- Kent
- Cover
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
FAQs for Ridgeway
Is Ridgeway in your area for floor joint sealing?
Yes, Ridgeway is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Is Ridgeway within the area you cover?
Yes, Ridgeway is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you take out the old sealant first?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
Is caulk good enough for skirting?
Caulk is fine for dry joints that do not move, but it cracks where there’s movement or water. For most floor joints, we use a flexible sealant.
Can grout be replaced with sealant on a tiled floor?
Often, yes, at the edges and along suitable lines. We remove the grout and seal the line with flexible sealant.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with our work in that time, tell us and we’ll put it right.
Where do you work from?
We work from Crawley. We cover Ridgeway and the rest of Kent, along with the rest of our area.
Why has a gap opened under my skirting?
Timber floors and skirting shrink and swell through the year. A flexible sealant closes the gap without cracking like caulk.
When it isn’t the sealant
Sealant is not the answer to every problem, and we will tell you before work begins. Sealant will not put right:
- Movement too big for a sealant joint
- Leaks from a failed tanking system
- Subfloor problems that need a flooring contractor
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
Joints and surfaces we work on
- Concrete floor joints
- Commercial floors
- Thresholds
- Skirting boards
- Wet room & bathroom floors
- Tiled floors
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Keep floor cleaning water to a minimum at the edges
- Keep heavy wheels off new concrete joints until cured
- Act on grout cracks that run in a straight line
- Check the sealant is paintable before decorating
Avoid flooding the floor when you clean. Keeping the edges drier helps the sealant last longer.
Concrete joints damaged by traffic get worse quickly. Sealing them early protects the edges and the floor safer.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours, depending on the length of joint. For a village or hamlet like Ridgeway, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the gap and the floor type and agree the right sealant.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- The sealant goes in, chosen for the floor and coloured to suit it.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Tell us if parking is tricky
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, phone 0345 464 0079 or drop us an email.
Related advice
Common problems we fix in Ridgeway
Concrete floor joints break down when traffic runs over open or failed joints. Pallet trucks and trolleys knock the edges away.
It’s worth asking for a quote if you see:
- Skirting caulk that keeps splitting
- Open joints that fill with dirt
- Chipped and open joints in warehouse floors
- Failed seals where bathroom floors meet baths and panels
Rented homes near Westenhanger station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
What to look for in a quote
- The length of the guarantee
- Which colour the sealant will be
- Whether all the old sealant comes out first
- Whether they’re fully insured
Towns and villages near Ridgeway
Other services in Ridgeway
New homes and floors in Ridgeway
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you look after a building such as Smeeth Community Primary School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. If you look after a church, hall or community building such as Church of St Mary, joints in its floors, skirtings and thresholds need resealing as they wear.
Ridgeway is about 4 miles east of Ashford, in Kent. Across the TN25 area, we cover floor joint sealing for homes and businesses. We cover 922 towns and villages across Kent. Chelmsford is on our list too, around 47 miles away.
Here we cover the TN25 postcode area for floor joint sealing. We also cover Smeeth (1 mile east), Brabourne Lees (1 mile east), Lilyvale (1 mile east), Bircholt Forstal (1 mile north-east) and Mersham (1 mile west). We also work in nearby towns such as Ashford (4 miles west), Canterbury (12 miles north-east), Dover (15 miles east), Folkestone (9 miles east), Faversham (14 miles north) and Hythe (6 miles south-east).
Around Ridgeway
The closest station to Ridgeway is Westenhanger station, roughly 3.9 miles south-east of the centre. Other landmarks nearby include William Harvey Hospital (2.4 miles north-west) and Lympne Castle (4.4 miles south-east). For a walk, there’s Hatch Park.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Different surfaces, different methods
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. We reseal them with a sealant suited to wet areas.
Wet room and bathroom floors
Bathroom floor edges get wet at every clean. A neat silicone joint keeps it out.