Kent · England

Small Hythe Remedial Sealant

Problem with your failed sealant joints in Small Hythe? We remove the old material, prepare the joints and seal them properly.

  • A second bead peeling off the first
  • Gaps opening along the back of the worktop
  • A shower that leaks however often it’s resealed

Book remedial sealant in Small Hythe

Remedial sealant in Small Hythe, done properly

Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. When the fault is elsewhere, we say so instead of resealing for the sake of it. Typical jobs include movement joints that have split or pulled away and smears and lumps from a botched reseal, across leaking tray & enclosure joints, botched or over-sealed joints and failed movement joints.

In a village or hamlet like Small Hythe, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.

All of our work is guaranteed for twelve months, in Small Hythe and everywhere else we cover.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Place
Small Hythe (TN30)
Region
Kent
Guarantee
One year on every job
Price
A clear price before any work starts
Call
0345 464 0079
Updated
26 October 2026

Small Hythe homes and their sealant

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For an older house near a landmark such as Church of St John the Baptist, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Small Hythe is about 10 miles south-west of Ashford, in Kent. We carry out remedial sealant for homeowners, landlords and businesses in Small Hythe and the surrounding area. We cover 922 towns and villages across Kent, from the larger towns to small villages. Our Crawley page covers work nearby (39 miles or so).

We cover every part of TN30 for remedial sealant. We also cover the places around Small Hythe: Broad Tenterden (1 mile north), Tenterden (2 miles north), Strood (2 miles north-west), Rolvenden Layne (3 miles west) and Rolvenden (3 miles west). Further out, we also cover Ashford (10 miles north-east), Park Wood (15 miles north-west), Kennington (12 miles north-east), New Romney (11 miles east), Staplehurst (11 miles north-west) and Stanhope (9 miles north-east).

Local landmarks in Small Hythe

Well-known places in the area include Benenden Hospital (4.8 miles north-west) and Smallhythe Place (within half a mile south). Green spaces nearby include Flatropers Wood.

Map of Small Hythe © OpenStreetMap contributors

FAQs for Small Hythe

Is remedial sealant in Small Hythe guaranteed?

Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.

Do you cover smaller places like Small Hythe?

Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Can landlords and businesses book you?

Yes. We work in homes, commercial premises and hotels, and we are fully insured.

Should I try DIY first?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Will it make a mess?

No. The area is protected while we work and cleaned up afterwards.

Will there be a smell?

That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.

Where are you based?

We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.

Can you take off two layers of silicone?

Yes. Both layers come out; new silicone does not bond to old silicone, which is why over-sealing fails.

Do you need remedial sealant in Small Hythe?

Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. None of them last.

Common reasons people contact us include:

  • Decorators’ caulk around a bath or shower
  • Movement joints that have split or pulled away
  • Wide, uneven beads that look worse than the old ones
  • Gaps opening along the back of the worktop

Schools such as Homewood School and Sixth Form Centre are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Before you book anyone

  • What preparation is included
  • What happens if the job turns out different
  • Whether you can choose the colour
  • Which sealant they’ll use, and why

Choosing a sealant specialist

What we do, step by step

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many layers have to come out. Somewhere like Small Hythe needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
  2. Each layer is cut out and the residue cleaned off.
  3. We treat any mould and dry the joint thoroughly.
  4. The right product goes in, with backing where the joint moves.
  5. The joint is tooled and you are told about anything else we found.

How to prepare

  • Let us know about stairs, lifts or work at height
  • Tell us about any water getting in
  • Mention any parking rules near the property

How to get a quote

There’s no standard price list. Instead, we send you a clear quote for your job. To get started, phone 0345 464 0079 or send us an email.

Get a price

Related advice

Leave it or put it right?

Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. In a small place like Small Hythe, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.

Why book with us

  • 180+ five-star Google reviews
  • Fully insured
  • More than 20 years in sealant work
  • ARBOMaster approved applicator

Take a look at how sealant jobs are priced and customer reviews.

Quotes for remedial sealant in Small Hythe

Call for a quick quote. The main things that affect it are:

  • The size of the job
  • Whether there’s mould to deal with
  • Any working-time requirements on site
  • Whether old sealant or filler has to be cut out

The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.

Helping us quote

To help us quote quickly, let us know:

  • Where the job is, and your postcode
  • The type of property
  • How many joints, rooms or windows are involved
  • Whether it has been sealed before

Want a quote for remedial sealant? Please ring 0345 464 0079 or drop us an email and tell us about the job. We will explain what we’d do and give you a clear price before any work starts.

Can I do it myself?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

For landlords and businesses

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.

Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.

Aftercare tips

No joint lasts for ever, but care makes a real difference. Our tips:

  • Check ceilings under showers for marks
  • Clean sealant with mild products only
  • Get the cause of a repeat leak found before resealing
  • Deal with small splits early

Give the new sealant its full cure time: follow the cure time we give you.

Mould under a second layer of sealant keeps growing out of sight. When it finally shows, the whole bead needs to come out.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job