Kent · England
Glazing & conservatory sealant in Small Hythe, Kent
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homeowners, landlords and businesses in Small Hythe. Fully insured, ARBOMaster approved and guaranteed for a year.
- Leaks from the base of a shower screen
- Sealant that was laid over old silicone and failed
- Glazing silicone that has cracked or come away
Glazing silicone in Small Hythe
Glass, frames and walls all move at different rates, so the sealant between them does a lot of work. When it cracks or lets go, water gets in. We cut it out and reseal with a glazing silicone suited to the joint. Typical jobs include water running down inside the glass and leaking glazing joints on a rooflight, across rooflights, glass-to-frame joints and glass-to-glass joints.
Around Small Hythe, many homes face open ground, so their windows and doors take the full weather. That exposure dries out and cracks the mastic around frames and sills faster.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or drop us an email.
- Where
- Small Hythe (TN30)
- Region
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What happens if it’s left?
Resealing can’t fix a failed unit or a cracked panel. We say so plainly and point you to a glazier or roofer. Around Small Hythe, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Why choose Mr Mastic in Small Hythe
- Sanitary silicone with an anti-fungal additive in wet areas
- Every job guaranteed for a year
- You choose the colour before work begins
- Arbo and Everbuild products
Small Hythe: your questions answered
Is there a guarantee on glazing silicone in Small Hythe?
All our work, in Small Hythe and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Is Small Hythe in your area for glazing silicone?
Yes. Our work covers London and the South East, and Small Hythe is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will send you a clear quote.
Can you fix a leaking conservatory?
Often, if the leak is at a sealant joint. We trace the leak first, so you know what you’re paying for.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme.
What sealant do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Are you insured?
Yes. We’re fully insured.
Can you replace a misted double-glazed unit?
We don’t replace glass. We look after the sealant joints, and we will tell you if a unit looks like it has failed.
Quotes for glazing silicone in Small Hythe
For a quick quote, just ask. The main things that affect it are:
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
- The number and length of the joints
- Any working-time requirements on site
A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us for an honest opinion and a quote.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Access, such as stairs, a lift or height
- The rough size of the job
- Photos by email, if that is easy
- Whether it’s a home or a business
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll explain what’s involved and send you a clear quote.
What happens on the day
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and tidy away. It generally takes a few hours for most jobs. Somewhere like Small Hythe needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we trace the leak and check it’s coming through a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- The glass and frame are cleaned and degreased.
- We apply a neutral-cure glazing silicone and tool it smooth.
- We check the joints and, where safe, run water over them.
Before we arrive
- Let us know about stairs, lifts or work at height
- Mention if the joints have been sealed before
- Tell us if parking is tricky
Getting a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or drop us an email.
Read more
Honest limits
Before booking, it’s worth knowing the limits:
- Condensation trapped between two panes
- Structural problems with a conservatory roof
- Cracked or broken glass
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Where we work in Small Hythe
- Glass-to-glass joints
- Conservatory frames
- Rooflights
- Glass-to-frame joints
- Glass balustrade bases
- Shower screens
Signs you need glazing silicone in Small Hythe
Shower screen silicone gets wet every day. Mould gets into it and the joint starts to lift.
Common reasons people contact us are:
- Water escaping where a screen meets the wall
- Drips on the inside of a conservatory window
- Sealant that was laid over old silicone and failed
- Black or yellowed silicone on glass joints
Schools such as Homewood School and Sixth Form Centre are buildings too, and larger buildings have plenty of frames, and the mastic around each one ages.
What your quote should include
- How long the guarantee is
- Whether the sealant suits the joint
- Which colour the sealant will be
- Who turns up on the day
Frames and glazing around Small Hythe
With historic houses such as Smallhythe Place (about 0.2 miles south) nearby, there’s older building stock in the area around Small Hythe as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
In the older streets around Church of St John the Baptist, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Small Hythe is about 10 miles south-west of Ashford, in Kent. From the centre of Small Hythe to the outskirts, glazing silicone is available for homes and businesses alike, from flats and houses to offices and hotels. Our Kent coverage runs to 922 places, Small Hythe among them. We also work in Crawley, around 39 miles away.
Here we cover the TN30 postcode area for glazing silicone. If you’re just outside Small Hythe, we cover Broad Tenterden (1 mile north), Tenterden (2 miles north), Strood (2 miles north-west), Rolvenden Layne (3 miles west) and Rolvenden (3 miles west). Within a short drive, we also cover Ashford (10 miles north-east), Park Wood (15 miles north-west), Kennington (12 miles north-east), New Romney (11 miles east), Staplehurst (11 miles north-west) and Stanhope (9 miles north-east).
Landmarks near Small Hythe
A little further out are Benenden Hospital (4.8 miles north-west) and Smallhythe Place (under half a mile south). Open spaces near Small Hythe include Flatropers Wood.
Different surfaces, different methods
Glass-to-glass joints
These joints are on show, so a straight, even finish matters.
Glass balustrade bases
Outdoor balustrade joints face the weather. Renewing the sealant keeps water out of the channel.
Nearby places to Small Hythe
More services for Small Hythe
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.