Kent · England

New Romney Glazing Silicone

Professional glazing silicone in and around New Romney, with every bit of old sealant taken out first.

  • Black or yellowed silicone on glass joints
  • Cracked silicone between glass panels
  • A quick top-up bead that didn’t last

Glazing silicone in New Romney

Keeping the joints in good condition

So the new joints stay in good condition:

  • Look over the glazing joints once a year
  • Ventilate the conservatory to cut condensation
  • Avoid scraping close to the bead
  • Clean glass with a mild cleaner and a soft cloth

Avoid scraping near the new silicone when you clean. Stick to a soft cloth.

Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below long before you see it.

About our glazing silicone in New Romney

A frameless shower screen depends on its silicone. The joint down the wall and the one along the tray are common leak points and both get fresh anti-fungal silicone. If you are dealing with mouldy sealant around glass panels and sealant that was laid over old silicone and failed, we can put it right, whatever the surface.

Many houses in smaller places like New Romney have conservatories, garden rooms or patio doors. Their glazing joints and frame seals are as much a part of the job as the windows, and any older timber or sash windows need a sealant that suits them.

All our work is covered by a 12-month guarantee.

Applicator reaching up to seal an external door frame on a sunny day
Where
New Romney (TN28)
Wider area
Kent
Guarantee
A year, on every job
Quotes
A clear price before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

When it isn’t the sealant

We will always be straight with you, so here’s what new sealant will not do:

  • Structural problems with a conservatory roof
  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • A broken pane or roof panel

If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.

Joints and surfaces we work on

  • Glass-to-glass joints
  • Conservatory frames
  • Rooflights
  • Glass-to-frame joints
  • Shower screens
  • Glass balustrade bases

Questions from New Romney

Is New Romney in your area for glazing silicone?

Yes, New Romney is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job.

Do you cover smaller places like New Romney?

Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

What guarantee do I get?

There’s a 12-month guarantee on every job.

Do you work for hotels and businesses?

Yes. We’ve worked for hotels, offices and other businesses and we are fully insured.

Do you remove the old sealant?

Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.

Should I try DIY first?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.

Can you reseal the base of a glass balustrade?

Yes. We cut out the failed sealant and reseal the base joint with a suitable product.

Will it make a mess?

We keep the work tidy. We protect what’s around the joints.

New Romney homes and the weather

New Romney is within about 2 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

In the older streets around Church of St Nicholas, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.

New Romney is about 8 miles south-west of Hythe, in Kent. We carry out glazing silicone for householders, landlords and businesses in New Romney and nearby, as part of our work across Kent. Our Kent coverage runs to 922 places, and New Romney is one of them. You can also see our page for Brighton, roughly 48 miles from New Romney.

Postcode districts we cover here for glazing silicone: TN28. If you need glazing silicone at a property on High Street, Church Road and Station Road or anywhere close by, our applicators can take on the job. New Romney is on the A259 and B2071, which makes it straightforward to reach with everything needed for glazing silicone. Close by, we work in Littlestone-on-Sea (1 mile east), Greatstone-on-Sea (1 mile south-east), St Mary in the Marsh (2 miles north), St Mary's Bay (2 miles north-east) and Old Romney (2 miles west). Within a short drive, we also cover Ashford (11 miles north), Folkestone (12 miles north-east), Hythe (8 miles north-east), Hawkinge (13 miles north-east), Tenterden (12 miles north-west) and Cheriton (11 miles north-east).

Near you in New Romney

Typical jobs here are in homes near Romney Warren Country Park, The Marsh Academy and The Marsh Academy and the streets around them. Nearby you will also find Lydd Town Museum (3 miles south-west) and Romney 'castle' (2.1 miles west). For a walk, there’s Burnthouse Pen and Dungeness National.

Map of New Romney © OpenStreetMap contributors

Landlords, agents and businesses in New Romney

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll quote.

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

What we do, step by step

You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a few hours, depending on how many joints need doing in most cases. In a smaller place like New Romney, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.

  1. First, we check where the water gets in.
  2. The failed silicone is cut out without marking the glass or frame.
  3. The joint is cleaned and degreased.
  4. A neutral-cure glazing silicone is applied and tooled.
  5. We check the finished joints and test with water where it’s safe.

Preparing for the visit

  • Tell us about any previous sealing or DIY attempts
  • Keep children and pets away from the work area
  • Tell us if parking is tricky

How to get a quote

Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you’re ready, ring 0345 464 0079 or drop us an email.

Ask for a quote

Advice

DIY sealant or a professional job?

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.

Do you need glazing silicone in New Romney?

Silicone will not bond to a dirty surface. If the glass and frame weren’t cleaned properly the sealant may lift within a few years.

These are the problems we’re asked about most:

  • Black or yellowed silicone on glass joints
  • Leaks where conservatory glass meets the frame
  • Glazing silicone that has cracked or come away
  • Sealant that was laid over old silicone and failed

If you look after a building such as St Nicholas Church of England Primary Academy, the mastic around its windows and doors needs looking after like any other building’s.

Before booking anyone

  • How the colour is chosen
  • How long to leave it before use
  • Are they insured?
  • What happens if they find a problem under the old sealant

Our hiring checklist

What the job involves on each surface

Glass-to-frame joints

Where glass sits in a frame, silicone keeps water out. When it splits, water can get into the frame.

Rooflights

Rooflight glazing joints are cut out and renewed. Leaks from the roof itself need a roofer.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job