Glasgow · Scotland

Remedial sealant & repairs in Shettleston, Glasgow

Remedial sealant across Shettleston and nearby, with old sealant always removed completely and a 12-month guarantee.

  • Thick, messy sealant smeared over tiles
  • Decorators’ caulk around a bath or shower
  • Kitchen joints letting water behind the worktop

Remedial sealant in Shettleston

How we handle remedial sealant in Shettleston

In Shettleston, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. We work on failed movement joints, expansion joints and leaking tray & enclosure joints, and people most often call us about beads that never stuck properly and decorators’ caulk around a bath or shower.

Shettleston is in one of Scotland’s four big cities, where many tenement bathrooms were fitted into rooms that weren’t built for them. Rooms like that are often small and slow to dry out, which is hard on sealant and grout.

Our work is backed for twelve months.

Place
Shettleston (G32, G31)
Region
Glasgow
Guarantee
A year, on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

Can I do it myself?

A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Landlord and commercial work in Shettleston

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Landlords and letting agents in Shettleston can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.

What remedial sealant looks like in Shettleston

Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.

Letting a property close to Carntyne station? Then a joint that keeps failing is best fixed properly while the property is empty.

Shettleston is about 2 miles north-west of Cambuslang, in Glasgow. Anywhere in G32, our applicators can take on remedial sealant. Shettleston is one of 183 towns and villages in Glasgow where we work for remedial sealant.

Jobs for remedial sealant in G32 and G31 is quoted and booked the same way as anywhere else. We cover properties on Wellshot Road, Tollcross Road and Budhill Avenue. Being close to the A89, Shettleston is simple for us to get to. Other places close to Shettleston include Greenfield (1 mile north), Budhill (1 mile north-east), Tollcross (1 mile south), Lightburn (1 mile north) and Springboig (1 mile north-east). Within a short drive, we also cover Glasgow (4 miles west), Hillhead (5 miles west), Dowanhill (5 miles west), Woodlands (4 miles west), Woodside (4 miles north-west) and North Kelvinside (5 miles north-west).

Landmarks near Shettleston

Around Shettleston, our work takes us to homes and buildings near St Andrew's Secondary School and Parkhead Library. The nearest railway station is Carntyne station, about 0.5 miles north-west of the centre. Other landmarks nearby include Tollcross Museum (under half a mile south-west) and Lightburn Hospital (0.7 miles north). For a walk, there’s Lenzie Moss and Cathkin Braes.

Map of Shettleston © OpenStreetMap contributors

Quotes for remedial sealant in Shettleston

The price is agreed before any work begins. It’s based on:

  • The number and length of the joints
  • How many areas need sealing
  • Whether the work is at height
  • Any working-time requirements on site

Doing several joints on one visit generally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.

What we need to know

Before you ask for a quote, have a think about:

  • Photos by email, if that is easy
  • The problem you’ve noticed
  • Roughly how big the job is
  • How we’d reach the joints

We don’t publish a price list. Instead, your job gets its own clear quote. To get started, send an email to info@mrmastic.co.uk.

How the job changes by surface

Movement & expansion joints

Movement joints in floors, walls and façades need a flexible sealant set to the right depth. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed with a low-modulus product.

Leaking trays & enclosures

A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. Both are checked before we reseal.

What happens on the day

We bring everything the job needs with us, so there’s nothing for you to buy. Once we have agreed what’s being done, we protect the area and start. It normally takes a few hours, depending on how many layers have to come out. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. For a job in Shettleston, tell us the floor, how the door entry system works and where we can park nearby.

  1. We start by checking the joint for movement, leaks and the reason it failed.
  2. Every layer of old sealant is cut and cleaned out.
  3. We clean the joint, treat any mould and let it dry.
  4. Where the joint moves, backing and a flexible sealant suited to the movement go in.
  5. The new joint is tooled neatly and we explain anything else we found.

Preparing for the visit

  • Mention any leaks or damp you’ve noticed
  • Tell us about access, such as stairs, a lift or high-level joints
  • Try not to wet indoor joints just before the visit

How to get a quote

Want a quote for remedial sealant? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.

Ask for a quote

Related advice

When it isn’t the sealant

In fairness, some problems need a different trade:

  • A bath, tray or worktop that moves until it’s properly fixed
  • A tray or bath that is cracked
  • A leaking trap, valve or supply pipe

If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.

What we seal

  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints
  • Failed movement joints
  • Shrunken worktop sealant
  • Expansion joints
  • Botched or over-sealed joints

Shettleston: your questions answered

Do you cover Shettleston for remedial sealant?

Yes, Shettleston is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.

I let a flat near Carntyne station. Can you help?

Yes, we work for landlords and agents. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will give you a clear price.

Where is Mr Mastic based?

We work from Crawley. We cover Shettleston and the rest of Glasgow.

Will you leave a mess?

Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.

Are you an approved applicator?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.

Can I choose the sealant colour?

Most of the time, yes. We will tell you which colours the right product comes in and agree one before we start.

Do you fix expansion and movement joints?

Yes. Backing sets the depth and stops the sealant sticking to the back, which lets it stretch.

How long before the joint can be used?

Cure times vary by product and the conditions. We tell you how long to leave it before we go.

What we’re called out for in Shettleston

Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould, faster where ventilation is poor. Then the only fix is removal and a new bead.

Any of these means the joints need attention:

  • Movement joints that have split or pulled away
  • Black mould underneath the bead
  • Smears and lumps from a botched reseal
  • Caulk or the wrong sealant used in a wet area

For site and facilities teams at buildings such as Eastbank Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.

Before you book anyone

  • Whether all the old sealant comes out first
  • Who turns up on the day
  • When the joint can take water or movement
  • Which sealant they’ll use, and why

10 questions to ask before you book

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job