Isle of Wight · England
Seaview Remedial Sealant
Our applicators work in Seaview on removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Thick, messy sealant smeared over tiles
- Gaps opening along the back of the worktop
- Sealant that came away because the surface wasn’t prepared
How we quote for remedial sealant
Every job gets its own quote. This is what makes a difference:
- The old material and how stubborn it is
- Any working-time requirements on site
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will go through it with you.
Helping us quote
Before you ask for a quote, have a think about:
- If someone has resealed it before
- The address or postcode of the job
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job and send pictures if you have them.
How we handle remedial sealant in Seaview
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint won’t last, however tidy it looks. We take it out and use a sealant made for that joint. Typical jobs include products that weren’t meant for the joint and gaps opening along the back of the worktop, on leaking tray & enclosure joints, mouldy bath & shower sealant and botched or over-sealed joints.
Around Seaview, it’s houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- Seaview (PO34)
- Region
- Isle of Wight
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What remedial sealant looks like in Seaview
Seaview is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. There are hotels and other places to stay in and around Seaview. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Schools such as Nettlestone Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as St. Peter's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Seaview is about 2 miles east of Ryde, in the Isle of Wight. Homes, rented property, offices and hotels in Seaview is covered for remedial sealant, old or new, large or small. Every job comes with our one-year guarantee. Seaview is one of 125 towns and villages in the Isle of Wight we cover. There’s also a page for Portsmouth, about 6 miles away.
Our applicators cover all of the PO34 postcode area for remedial sealant and the streets around it. If you need remedial sealant at a property on High Street, Madeira Road and Church Street or anywhere close by, we can help. Other places close to Seaview include Nettlestone (1 mile south), Spring Vale (1 mile north-west), Pondwell (1 mile west), Puckpool (1 mile west) and Appley (2 miles west). Further out, we also cover Newport (8 miles west), Cowes (9 miles west), Sandown (5 miles south-west), Shanklin (7 miles south-west), Ventnor (10 miles south-west) and East Cowes (8 miles west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
What’s near Seaview
Locally, jobs take us to homes and businesses close to The Boat House and the streets around them. The nearest railway station is Smallbrook Junction station, roughly 2 miles west of the centre. Well-known places in the area include Southsea Castle (4.1 miles north) and Gosport War Memorial Hospital (5.3 miles north). The countryside around Seaview includes Brading Down and Alan Hersey Nature Reserve.
What we do, step by step
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Seaview, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Let us know about parking restrictions
- Move anything stored near the joints
- Let us know about stairs, lifts or work at height
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Read more
Nearby places to Seaview
Other services in Seaview
Honest limits
A few problems are outside what sealant work can do:
- Water damage behind tiles that needs a tiler
- A leaking trap, valve or supply pipe
- Older mastics that may need an asbestos check before removal
If you’re not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Where we work in Seaview
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Expansion joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Failed movement joints
Leave it or put it right?
Stripping out botched sealant adds time to a reseal, but not by much: the work takes a few hours for a typical bath or shower, longer where several layers have been applied. It’s far less disruption than resealing the same joint again and again. Around Seaview, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why us?
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- More than 20 years in sealant work
- Colour agreed with you before any work starts
Read our cost guide or customer reviews.
Landlord and commercial work in Seaview
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
For anyone letting property in or around Seaview, several properties can go on one quote. Just tell us the addresses and what each one needs.
Seaview questions
Do you cover smaller places like Seaview?
Yes, Seaview is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for landlords with property near Smallbrook Junction station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Someone sealed over the old bead. Can you fix it?
Yes. Stripping layered sealant takes longer than a normal reseal, but it’s the only way the new joint will last.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we are using and why.
What happens if the problem is the tray or the plumbing?
That is why we look for the cause first. If the fault is elsewhere, you will know before any work is done.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. First we check whether the leak is the sealant at all, then the joints are stripped and resealed.
Can failed expansion joints be resealed?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Keep an eye on the ceiling below the bathroom
- Keep bleach and abrasives off the bead
- Get the cause of a repeat leak found before resealing
- Do not add new sealant on top of old
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.
Signs you need remedial sealant in Seaview
Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, so the silicone goes mouldy or lets go.
It’s worth asking for a quote if you see:
- A shower that leaks however often it’s resealed
- Products that weren’t meant for the joint
- Smears and lumps from a botched reseal
- Mould trapped under a layer of silicone
For landlords with property near Smallbrook Junction station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Questions to ask before booking
- Who turns up on the day
- How the joint is cleaned and prepared
- How long the guarantee is
- What product goes in the joint