Highland · Scotland
Scourie Remedial Sealant
Problem with your failed sealant joints in Scourie? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Sealant peeling off a dusty or damp surface
- Wide, uneven beads that look worse than the old ones
- Torn expansion joints
Do you need remedial sealant in Scourie?
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks, faster where ventilation is poor. Then the only fix is removal and a new bead.
These are the problems we are asked about most:
- Sealant that came away because the surface wasn’t prepared
- Products that weren’t meant for the joint
- Floor or wall movement joints that have failed
- Worktop sealant that has shrunk and split
In and around Scourie, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
What your quote should include
- Whether all the old sealant comes out first
- How the surfaces are prepared before sealing
- How the colour is chosen
- How long to leave it before use
Remedial sealant in Scourie
A joint that keeps letting you down needs more than another bead. Send photos when you email us at info@mrmastic.co.uk, and say how long ago it was last done. Typical jobs include sealant peeling off a dusty or damp surface and torn expansion joints, across botched or over-sealed joints, mouldy bath & shower sealant and expansion joints.
For a place like Scourie, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. The journey and access are simply planned in advance.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Scourie (IV27)
- Region
- Highland
- Guarantee
- One year on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What affects the quote in Scourie
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Which sealant suits the joint
- The number and length of the joints
- Whether the work is at height
- Working hours on commercial sites
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- The type of property
- Where the property is
- The problem you’ve noticed
- Photos by email, if that’s easy
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we will take it from there.
What we cannot put right
We’ll always be straight with you, so here’s what new sealant won’t do:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Water damage behind tiles that needs a tiler
- A tray or worktop that needs refixing first
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
Joints and surfaces we work on
- Shrunken worktop sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Expansion joints
- Botched or over-sealed joints
Surface by surface
Mouldy bath & shower sealant
Where mould keeps coming back, ventilation is generally part of the cause. Along with resealing, we’ll mention if the room needs better ventilation.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Run the fan after every shower
- Report a tray that rocks or a worktop that lifts
- Keep an eye on the ceiling below the bathroom
- Deal with small splits early
Go easy on the new sealant: a mild cleaner and a soft cloth, with no blades or scourers.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.
Landlord and commercial work in Scourie
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Also near Scourie
Also in Scourie
Remedial sealant around Scourie
Scourie is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Whether the job is in Scourie itself or nearby, the right material for each joint matters as much as a neat finish.
Scourie is in Highland. If you need remedial sealant in Scourie, please email us at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Highland. Scourie is one of 253 towns and villages in Highland we cover for remedial sealant.
Work in IV27 works the same way as everywhere else we cover. Whether your property is on Moffat Square and Harbour Road or anywhere close by, our applicators can take on the job. We also cover the places around Scourie: Scourie More (1 mile south-west), An Druim Beag (8 miles south), Kinlochbervie (8 miles north-east), Stor (12 miles south-west) and Stoer (12 miles south-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Scourie
For a walk, there’s Loch Bad nam Mult and Handa Island.
What happens on the day
There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a typical bath or shower, longer where several layers have been applied. Outside jobs in Scourie need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
How to prepare
- For business premises, tell us about site rules or sign-in
- Keep children and pets away from the work area
- Let us know about parking restrictions
Get a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, drop us a line at info@mrmastic.co.uk.
Read more
Common questions in Scourie
Is remedial sealant in Scourie guaranteed?
All our work, in Scourie and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Can you do remedial sealant in Scourie?
Yes, Scourie is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear quote.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
What happens if the problem is the tray or the plumbing?
In that case, we tell you what we’ve found. A plumber or fitter may be needed.
How long does remedial resealing take?
Allow a few hours for a typical bath or shower, longer where several layers have been applied. We’ll give you a timescale when we quote.
Can you quote for more than one area?
Yes. Just list everything you need and we’ll quote it together.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Can you fix a reseal that hasn’t worked?
Yes. Repeat leaks usually come from over-sealing, movement or water getting in elsewhere, and we deal with the cause first.