Kent · England
Remedial Sealant in Rabbit's Cross
Professional remedial sealant in and around Rabbit's Cross, with old sealant always removed completely.
- Dark patches showing through the sealant
- Sealant peeling off a dusty or damp surface
- A shower that leaks however often it’s resealed
The process
We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Rabbit's Cross needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
Get a quote
Asking for a quote is easy: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job.
Read more
Remedial sealant in Rabbit's Cross, done properly
If a joint has been resealed and is leaking again, it’s worth a proper look. It helps to have pictures when you ring 0345 464 0079 or drop us an email, along with when it was last resealed. If you’re dealing with smears and lumps from a botched reseal and leaks that keep coming back after resealing, we can put it right.
In a village or hamlet like Rabbit's Cross, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or drop us an email.
- Place
- Rabbit's Cross (ME17)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
For landlords and businesses
Letting agents and landlords in Rabbit's Cross can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Places near Rabbit's Cross
What else we do in Rabbit's Cross
Why it’s worth doing now in Rabbit's Cross
Repeat failures have a cause. Finding it, whether movement, water from elsewhere or an unsuitable product, ends the cycle. Around Rabbit's Cross, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- A 12-month guarantee on all work
- Fully insured
- Domestic, commercial and hotel work
- Colour picked to suit the job
Take a look at how sealant jobs are priced or customer reviews.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Don’t add new sealant on top of old
- Clean sealant with mild products only
- Check trays and worktops do not move
- Keep movement joints clear of mortar and paint
Do not let anyone seal over it later. New silicone doesn’t bond to old.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
Remedial sealant around Rabbit's Cross
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Staplehurst station, botched sealant from a previous quick fix is easier to strip out between tenants.
Rabbit's Cross is about 5 miles south of Maidstone, in Kent. We carry out remedial sealant for homeowners, landlords and businesses in Rabbit's Cross and the surrounding area, as part of our work across Kent. Our area takes in 922 places across Kent. Crawley is on our list too, around 33 miles away.
Postcode districts we cover here for remedial sealant: ME17. Nearby, we also carry out remedial sealant in Cross-at-Hand (1 mile south), Devil's Den (1 mile east), Underling Green (2 miles west), Farthing Green (2 miles east) and St Ann's Green (2 miles south-west). Larger places within reach include Maidstone (5 miles north), Ashford (14 miles east), Sittingbourne (13 miles north-east), Royal Tunbridge Wells (13 miles west), Tonbridge (12 miles west) and Kings Hill (8 miles north-west).
Local landmarks in Rabbit's Cross
The closest station to Rabbit's Cross is Staplehurst station, roughly 1.8 miles south. Other landmarks nearby include South East Romany Museum (2.4 miles south-west) and Oakwood Hospital (5.7 miles north-west).
FAQs for Rabbit's Cross
Do you cover Rabbit's Cross for remedial sealant?
Yes, Rabbit's Cross is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
I let a flat near Staplehurst station. Can you help?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Can you reseal a split movement joint?
Yes. Backing sets the depth and stops the sealant sticking to the back, which lets it stretch.
Can you strip sealant from an acrylic tray safely?
Yes. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. We point out any damage that’s already there.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and we’ll quote it together.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Can I choose the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
How long does the work take?
That depends on how many layers there are and how many joints. We will tell you before any work starts.
What we’re called out for in Rabbit's Cross
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, cannot stretch, and tears at the first real movement. Backing rod or bond-breaker tape prevents it.
If you can see any of these, it’s time to have the joints looked at:
- Thick, messy sealant smeared over tiles
- Repeat leaks from the same joint
- Sealant applied over old sealant that has lifted
- Black mould underneath the bead
In and around Rabbit's Cross, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Comparing quotes
- The length of the guarantee
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
- Which sealant they’ll use, and why
Surface by surface
Mouldy bath & shower sealant
Repeat mould normally points to a damp, poorly aired room. Along with resealing, we’ll mention if the room needs better ventilation.
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. It needs fixing down first, which we will point out.