Highland · Scotland
Remedial Sealant in Plockton
Removing failed, mouldy or leaking sealant and putting it right for Plockton, backed by a 12-month guarantee. Call for a quick quote.
- Repeat leaks from the same joint
- Dark patches showing through the sealant
- Decorators’ caulk around a bath or shower
Bathrooms and kitchens in Plockton
Plockton is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For site and facilities teams at buildings such as Plockton High School, we reseal washrooms and kitchens in schools and businesses as well as homes. Homes close to 1-6 Old Church Court include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Plockton (Gaelic: Am Ploc) is in Highland. Plockton gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 253 towns and villages across Highland, large and small.
All of IV52 is covered for remedial sealant. Streets in the area include Station Road, Harbour Street and Camas an Arbhair, and we cover them all. If you’re just outside Plockton, we cover Drumbuie (2 miles south-west), Balmacara (3 miles south), Erbusaig (4 miles south-west), Strome Ferry (4 miles east) and Reraig (4 miles south). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Landmarks near Plockton
Plockton’s nearest station is Duncraig station, roughly 0.6 miles east. Other landmarks nearby include Duncraig Castle (0.7 miles east). Open spaces near Plockton include Loch Lundie.
Remedial sealant in Plockton, done properly
A joint that keeps letting you down needs more than another bead. Send photos when you email us at info@mrmastic.co.uk. We work on shrunken worktop sealant, expansion joints and leaking tray & enclosure joints, and people most often call us about black mould underneath the bead and sealant peeling off a dusty or damp surface.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
We stand behind the work with a 12-month guarantee.
- Where
- Plockton (IV52)
- Region
- Highland
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Nearby places to Plockton
What else we do in Plockton
Signs you need remedial sealant in Plockton
Water from somewhere else can ruin a good seal. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
These are the problems we’re asked about most:
- Dark patches showing through the sealant
- Floor or wall movement joints that have failed
- Kitchen joints letting water behind the worktop
- Products that weren’t meant for the joint
For landlords with property near Duncraig station, botched sealant from a previous quick fix is easier to strip out between tenants.
What to look for in a quote
- Whether they seal over old material or remove it
- Whether you can choose the colour
- How long the guarantee is
- Who does the work, and how experienced they are
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Hotels need rooms back in use, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
Quotes for remedial sealant in Plockton
Your quote is based on your job. We take into account:
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
- Which sealant suits the joint
- How many rooms, windows or areas are involved
Doing several joints on one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Helping us quote
To make quoting easier, let us know:
- How many joints, rooms or windows are involved
- The address or postcode of the job
- The problem you’ve noticed
- Any access issues, like height or stairs
If you are in Plockton and need remedial sealant, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.
The process
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. We protect the surfaces around the joints before any work begins. The work usually takes a few hours for most joints, depending on how much old sealant has to come out. For a place like Plockton, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Mention any sign-in or site rules at work premises
- Keep children and pets away from the work area
- Mention any parking rules near the property
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, drop us a line at info@mrmastic.co.uk.
Advice
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Do not add new sealant on top of old
- Find out why the sealant failed first
- Air the bathroom so the sealant can dry
- Keep movement joints clear of mortar and paint
Keep an eye on the joint at first, particularly where the original failure was caused by movement. Should anything change, drop us a line at info@mrmastic.co.uk.
Don’t keep resealing the same joint. Have someone find out why, or the next bead will go the same way.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Common questions in Plockton
Do you cover Plockton for remedial sealant?
Yes, Plockton is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
I let a flat near Duncraig station. Can you help?
Yes. We work for landlords and agents as well as householders. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Can you remove sealant that is been put over old sealant?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s what makes the new bead last.
Can you work on commercial sites?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Where do you work from?
We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
When something else is needed
New sealant can’t fix everything, and we’ll tell you before work begins. Sealant will not put right:
- A leaking trap, valve or supply pipe
- Tiles that have come away from the wall
- A tray or worktop that needs refixing first
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Surfaces we seal
- Expansion joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Failed movement joints