Hampshire · England

Remedial sealant & repairs in Pilley, Hampshire

Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Pilley and across Hampshire. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.

  • Torn expansion joints
  • Thick, messy sealant smeared over tiles
  • Black mould underneath the bead

Remedial sealant near Pilley

Remedial sealant for homes and businesses in Pilley

Getting old sealant out properly is slow, careful work. Every layer is cut out, the residue cleaned off and the joint degreased, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. Typical jobs include sealant peeling off a dusty or damp surface and decorators’ caulk around a bath or shower, across leaking tray & enclosure joints, shrunken worktop sealant and botched or over-sealed joints.

Being in a small place like Pilley makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

There’s a 12-month guarantee on every job.

Where
Pilley (SO41)
Region
Hampshire
Cover
One year on every job
Price
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026
Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles

Keeping the joints in good condition

Simple care keeps the joints in good condition. Our advice:

  • Use a soft cloth, not a scourer, on silicone
  • Have loose fittings fixed before resealing
  • Don’t wait for a small gap to become a leak
  • Keep an eye on the ceiling below the bathroom

If the joint ever needs renewing, have it cut out, not sealed over. Over-sealing is how many remedial jobs start.

Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.

Common problems we fix in Pilley

Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.

If you can see any of these, it’s time to have the joints looked at:

  • Kitchen joints letting water behind the worktop
  • Mould trapped under a layer of silicone
  • Decorators’ caulk around a bath or shower
  • Beads that never stuck properly

In the older streets around Saint Nicholas Chapel, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

What your quote should include

  • Which sealant they’ll use, and why
  • How the colour is chosen
  • Are they insured?
  • How the surfaces are prepared before sealing

10 questions to ask before you book

Your questions about remedial sealant in Pilley

Will you come out to Pilley?

Yes. Pilley is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do you work for landlords with property near Lymington Town station?

Yes, we work for landlords and agents. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.

Can you remove old sealant without damaging the bath?

Yes. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. We point out any damage that is already there.

When is the sealant fully cured?

Cure times vary by product. Before we leave, we will tell you the cure time.

Can I choose the sealant colour?

We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.

Can you reseal a split movement joint?

Yes. Backing sets the depth and stops the sealant sticking to the back, which lets it stretch.

Will there be a smell?

There can be a smell while the sealant cures. Opening a window helps.

Is it worth trying it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Should I try it myself first?

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Honest limits

In fairness, some problems need a different trade:

  • Failed tanking or loose tiles behind the sealant
  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
  • A leaking trap, valve or supply pipe

If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think.

Where we work in Pilley

  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Botched or over-sealed joints
  • Failed movement joints
  • Expansion joints
  • Leaking tray & enclosure joints

Work for landlords, hotels and businesses

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

For anyone letting property in or around Pilley, jobs at different addresses can go on one quote. Send us the addresses and the work at each.

How the visit works

The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. The job normally takes a few hours, depending on how many layers have to come out. Somewhere as small as Pilley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
  2. Old beads and residue are removed down to clean surfaces.
  3. Mould is treated and the joint dried.
  4. We reseal with a product suited to the joint, backed where needed.
  5. The joint is tooled and you are told about anything else we found.

Preparing for the visit

  • Mention if the joints have been sealed before
  • Tell us about any water getting in
  • Keep pets and children clear of the area while we work

Getting a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.

Get a quick quote

Related advice

What the job involves on each surface

Mouldy bath & shower sealant

Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out.

Leaking trays & enclosures

Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. Both are checked before we reseal.

What remedial sealant looks like in Pilley

Pilley is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

Rented homes near Lymington Town station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Managing a site like William Gilpin Church of England Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.

Pilley is about 2 miles north of Lymington, in Hampshire. Wherever you are in the SO41 postcode area, our applicators can take on remedial sealant. 683 places in Hampshire are on our list, large and small. You can also see our page for Southampton, roughly 11 miles from Pilley.

Every address in SO41 is within our area for remedial sealant, from the main roads to the quietest streets. Whether your property is on Pilley Street, Burnt House Lane and May Lane or a nearby road, we can help. Other places close to Pilley include Pilley Bailey (1 mile north-east), Warborne (1 mile south-west), Bull Hill (1 mile east), Portmore (1 mile south-east) and Boldre (1 mile west). Further out, we also cover Eastleigh (15 miles north-east), Fareham (15 miles east), Totton (9 miles north), Chandler's Ford (15 miles north-east), Hedge End (14 miles north-east) and Romsey (15 miles north).

What’s near Pilley

In Pilley, that means homes and buildings near Priestlands School, The Red Lion Inn and Southlands School. For rail, the closest station is Lymington Town station, roughly 1.5 miles south. Nearby you will also find St Barbe Museum and Art Gallery (1.7 miles south) and Lymington New Forest Hospital (1.1 miles south-west). Not far away are Boldre Foreshore.

Map of Pilley © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job