Hampshire · England

Battramsley Remedial Sealant

Our applicators work in Battramsley on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.

  • Dark patches showing through the sealant
  • Gaps opening along the back of the worktop
  • A second bead peeling off the first

Remedial sealant in Battramsley

How the job changes by surface

Movement & expansion joints

Joints filled with mortar, grout or rigid filler cannot move. Where it can be raked out, we replace it with flexible sealant.

Windows & doors

Frames resealed over the top end up with hard, layered mastic. We remove it all and clean back to sound surfaces before backing and resealing.

Remedial sealant in Battramsley

If a joint fails again and again, something is causing it. A tray that moves, a worktop that is not fixed, the wrong sealant or water getting in elsewhere will beat any new bead. We look for the cause before we reseal. We work on failed movement joints, shrunken worktop sealant and botched or over-sealed joints, and the jobs we see most are products that weren’t meant for the joint and worktop sealant that has shrunk and split.

Somewhere as small as Battramsley, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

Sealant gun close-up on a shower enclosure wall joint
Where
Battramsley (SO41)
Region
Hampshire
Guarantee
12 months on all our work
Quotes
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026

Why deal with it now?

DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful stripping is where most of our time goes. Where a wall is exposed, as many are in small places like Battramsley, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.

Why book with us

  • White, clear, grey or coloured to suit, where the product allows
  • Arbo and Everbuild products
  • We never seal over old sealant
  • Over 20 years’ experience

Take a look at what affects the cost and what customers say.

What we do, step by step

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. Most jobs take a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Battramsley needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we find out how and where the joint has failed.
  2. We strip the joint completely, removing any layers below.
  3. Next, any mould is treated and the joint dried.
  4. Moving joints get backing and a flexible sealant to suit.
  5. Finally we finish the joint and talk you through what we found.

Getting ready for the visit

  • On commercial sites, let us know about site rules
  • Where the joints are inside, avoid wetting them before we arrive
  • Mention any leaks or damp you’ve noticed

Get a quote

For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.

Get a price

Advice

Battramsley homes and their sealant

Battramsley is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For site and facilities teams at buildings such as William Gilpin Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Sway station, botched sealant from a previous quick fix is easier to strip out between tenants.

Battramsley is about 2 miles north of Lymington, in Hampshire. If you need remedial sealant in Battramsley, it’s easy to get a quote: please ring 0345 464 0079 or email us. We cover Hampshire from our Crawley base. Our area takes in 683 places across Hampshire. There’s also a page for Southampton, about 12 miles away.

We cover every part of SO41 for remedial sealant. We also cover Sandy Down (1 mile north), Boldre (1 mile south-east), Mount Pleasant (1 mile south-west), Warborne (1 mile south-east) and Pilley (1 mile east). Further out, we also cover Totton (9 miles north), Hedge End (14 miles north-east), Romsey (15 miles north), Hythe (9 miles north-east), New Milton (5 miles south-west) and Ringwood (10 miles north-west).

Near you in Battramsley

Locally, jobs take us to homes and businesses close to Priestlands School, Southlands School and The Hobler Public House and the streets around them. The nearest railway station is Sway station, roughly 2 miles west. Well-known places in the area include Lymington New Forest Hospital (1.5 miles south-east) and St Barbe Museum and Art Gallery (2.2 miles south-east). For a walk, there’s Boldre Foreshore.

Map of Battramsley © OpenStreetMap contributors

Do you need remedial sealant in Battramsley?

Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould, especially in damp, poorly aired rooms. Then the only fix is removal and a new bead.

Any of these means the joints need attention:

  • Repeat leaks from the same joint
  • Dark patches showing through the sealant
  • A second bead peeling off the first
  • Movement joints that have split or pulled away

Homes close to Church of St John include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.

What your quote should include

  • How the surfaces are prepared before sealing
  • How the colour is chosen
  • Whether VAT is included
  • Who turns up on the day

10 questions to ask before you book

Keeping the joints in good condition

Simple care keeps the joints in good condition. We recommend:

  • Never fill a movement joint with mortar or grout
  • Keep bleach and abrasives off the bead
  • Don’t wait for a small gap to become a leak
  • Keep the room well ventilated

Clean gently: no scraping, scouring pads or harsh chemicals.

Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into floors, walls or ceilings. Sorting it early limits the damage.

What affects the quote in Battramsley

Every job gets its own quote. These are the things that affect it:

  • Access and height
  • How many areas need sealing
  • The number and length of the joints
  • When we can work, for business premises

The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before we start.

What we need to know

To make quoting easier, please include:

  • What the problem is, such as mould, gaps, leaks or cracking
  • How many joints, rooms or windows are involved
  • Whether it’s a home or a business
  • A few pictures by email, if you can

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.

FAQs for Battramsley

I let a flat near Sway station. Can you help?

Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.

Is Battramsley within the area you cover?

Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

How much does remedial sealant cost in Battramsley?

Size, access and the old material all affect the cost. Call for a quick quote.

Do I have to be there?

Access is agreed with you when the job is booked. For inside work, that normally means someone being in.

How long does the work take?

Longer than a simple reseal, because every layer has to come out. Most jobs take a few hours.

Is remedial work guaranteed?

Yes. Our 12-month guarantee covers the work.

What sealant do you use?

Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.

Can you fix a reseal that hasn’t worked?

Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.

Honest limits

We’ll always be straight with you, so here’s what sealant can’t fix:

  • Older mastics that may need an asbestos check before removal
  • Movement from fittings that aren’t supported
  • A cracked shower tray or bath (that needs repair or replacing)

If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.

Where we work in Battramsley

  • Botched or over-sealed joints
  • Leaking tray & enclosure joints
  • Expansion joints
  • Mouldy bath & shower sealant
  • Shrunken worktop sealant
  • Failed movement joints
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job