Hampshire · England
Remedial Sealant in Phoenix Green
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Phoenix Green and across Hampshire. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Dark patches showing through the sealant
- Wide, uneven beads that look worse than the old ones
- Floor or wall movement joints that have failed
Remedial sealant in Phoenix Green, done properly
A joint that keeps letting you down needs more than another bead. It helps to have photos when you call 0345 464 0079 or email us, and say how long ago it was last done. If you have over-sealed joints coming away and thick, messy sealant smeared over tiles, we can put it right.
Around Phoenix Green, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Every job is covered by our 12-month guarantee.

- Place
- Phoenix Green (RG27)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Remedial sealant in Phoenix Green: local notes
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Winchfield station? Then a joint that keeps failing is best fixed properly while the property is empty. Homes close to St Mary's Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. If you look after a building such as Greenfields Junior School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Phoenix Green is about 3 miles north-west of Fleet, in Hampshire. Every kind of property in Phoenix Green can book us for remedial sealant. The work is guaranteed for a year. Phoenix Green is one of 683 places in Hampshire where we work. Reading is on our list too, around 11 miles away.
We cover every part of RG27 for remedial sealant. If you need remedial sealant at a property on Pippin Square, London Road and Weir Road or a nearby road, we can help. Close by, we work in Winchfield (1 mile south), West Green (1 mile north-west), Murrell Green (1 mile west), Hook (2 miles west) and Broad Oak (2 miles south). Larger places within reach include Basingstoke (9 miles west), Farnborough (6 miles east), Fleet (3 miles south-east), Aldershot (7 miles south-east), Alton (10 miles south) and Yateley (4 miles north-east).
Near you in Phoenix Green
We work in homes and buildings around Phoenix Inn and Calthorpe Park School and the streets around them. The closest station to Phoenix Green is Winchfield station, roughly 0.7 miles south. Nearby you’ll also find Hart Shopping Centre (3.1 miles east) and West Green House Agricultural Museum (1 mile north-west). Not far away are Dogmersfield Lake and Fleet Pond Nature Reserve.
For landlords and businesses
For anyone letting property in or around Phoenix Green, several properties can be quoted together. Just tell us the addresses and what each one needs.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
What affects the cost of remedial sealant
The quote reflects the job in front of us. We take into account:
- Any mould that needs treating
- Working hours on commercial sites
- The old material and how stubborn it is
- How many areas need sealing
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Whether it’s a home or a business
- How we’d reach the joints
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
For a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before any work starts.
How the visit works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes a few hours for a typical bath or shower, longer where several layers have been applied in most cases. For a village or hamlet like Phoenix Green, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
How to prepare
- Try not to wet indoor joints just before the visit
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
Getting a quote
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job.
Read more
Looking after it afterwards
After the cure time, these simple habits help:
- Find out why the sealant failed first
- Run the fan after every shower
- Report a tray that rocks or a worktop that lifts
- Check ceilings under showers for marks
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What we can’t put right
To be straight with you, some problems need a different trade:
- Cracks in the fitting rather than the joint
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A tray or worktop that needs refixing first
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Expansion joints
- Failed movement joints
- Botched or over-sealed joints
Questions from Phoenix Green
Is Phoenix Green in your area for remedial sealant?
Yes, Phoenix Green is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or send us an email and let us know what needs doing, and we will send you a clear quote.
Is Phoenix Green within the area you cover?
Yes. Phoenix Green is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
What if the leak isn’t the sealant?
That’s why we look for the cause first. If we find the leak is elsewhere, we tell you before going further.
Can you take off two layers of silicone?
Yes. We remove every layer; over-sealing fails because silicone will not bond to silicone.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will tell you how long to leave the joint.
Places near Phoenix Green
What else we do in Phoenix Green
Why it’s worth doing now in Phoenix Green
Another bead over the top will not fix a failed joint. It does not grip the old layer, leaving the leak in place and one more layer to cut out later. Around Phoenix Green, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why Phoenix Green customers choose us
- Old sealant always removed completely
- Over 20 years’ experience
- Tidy, careful work
- Anti-fungal sanitary silicone in wet areas
Take a look at our cost guide or customer reviews.
