Isle of Wight · England
Parkhurst Remedial Sealant
Our applicators work in Parkhurst on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- A shower that leaks however often it’s resealed
- Smears and lumps from a botched reseal
- Movement joints that have split or pulled away
How we handle remedial sealant in Parkhurst
A joint that keeps letting you down needs more than another bead. It helps to have pictures when you ring 0345 464 0079 or drop us an email. If you’re dealing with leaks that keep coming back after resealing and gaps opening along the back of the worktop, we can put it right.
For a small place like Parkhurst, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
All of our work is guaranteed for twelve months.
- Place
- Parkhurst (PO30)
- Wider area
- Isle of Wight
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlords, agents and businesses in Parkhurst
We also work for property managers and facilities teams in Parkhurst and across the Isle of Wight. We can quote a run of properties together, and we’re fully insured.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Why it’s worth doing now in Parkhurst
A joint that has failed twice will fail again unless the cause is dealt with. Finding it, whether movement, water from elsewhere or an unsuitable product, ends the cycle. In a small place like Parkhurst, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.
What you get with us
- Homes, businesses and hotels
- 180+ five-star Google reviews
- Quality sealants from Arbo and Everbuild
- Over 20 years’ experience
What remedial sealant looks like in Parkhurst
Parkhurst has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Schools such as Hunnyhill Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Parkhurst is about 1 mile north of Newport, in the Isle of Wight. Homes, rented property, offices and hotels in Parkhurst can book us for remedial sealant. The work is guaranteed for a year. Parkhurst is one of 125 places in the Isle of Wight we cover for remedial sealant. Portsmouth is on our list too, about 12 miles from Parkhurst.
Every address in PO30 is within our area for remedial sealant, from the main roads to the quietest streets. Local streets include Dodnor Lane, Argyle Road and Sherwood Road, and we cover them all. If you are just outside Parkhurst, we cover Noke Common (1 mile north-west), Hunny Hill (1 mile south), Forest Side (1 mile south-west), Northwood (2 miles north) and Rew Street (2 miles north-west). We also work in nearby towns such as Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
What’s near Parkhurst
Locally, jobs take us to homes and businesses close to Medina College, Island Innovation VI Form Campus and The Stag pub, among other places. Other landmarks nearby include Isle of Wight Bus & Coach Museum (1 mile south-east) and Carisbrooke Castle (2.1 miles south). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
When to call us in Parkhurst
Some joints fail because water is reaching them from behind. A leaking valve, a failed waste or cracked grout feeds water behind the bead, so the silicone goes mouldy or lets go.
Keep an eye out for these signs:
- Smears and lumps from a botched reseal
- Caulk or the wrong sealant used in a wet area
- Movement joints that have split or pulled away
- Leaks that keep coming back after resealing
In and around Parkhurst, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Before you book anyone
- Whether they seal over old material or remove it
- How hidden problems are handled
- Who turns up on the day
- How the joint is cleaned and prepared
How the visit works
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. It usually takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere like Parkhurst needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any leaks or damp you’ve noticed
Get a quote
Want a quote for remedial sealant? Please phone 0345 464 0079 or send us an email and tell us about the job. We will explain what we’d do and give you a clear price before any work starts.
Advice
What the job involves on each surface
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, in a colour that suits the frame.
Movement & expansion joints
A movement joint must be able to stretch. We remove the failed sealant, fit backing and reseal with a low-modulus product.
FAQs for Parkhurst
Is Parkhurst within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for hotels and guest houses in Parkhurst?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
When is the sealant fully cured?
Cure times vary by product and the temperature. Before we leave, we will tell you the cure time.
How long does the work take?
Allow a few hours for a typical bath or shower, longer where several layers have been applied. You will know the timing when we quote.
Will there be a smell?
Possibly a little. It fades as the sealant cures.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
What if the leak isn’t the sealant?
Then we explain what we’ve found. You may need a plumber or bathroom fitter.
Can you reseal a split movement joint?
Yes. Backing sets the depth and stops the sealant sticking to the back, which lets it stretch.
When it isn’t the sealant
In fairness, there are a few things sealant will not fix:
- Sealant in an older building that needs testing for asbestos first
- Cracks in the fitting rather than the joint
- Water damage behind tiles that needs a tiler
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints