Kent · England
Remedial sealant & repairs in Palmer's Green, Kent
Problem with your failed sealant joints in Palmer's Green? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- A second bead peeling off the first
- A shower that leaks however often it’s resealed
- Thick, messy sealant smeared over tiles
Aftercare tips
A little care helps the new joints last. We recommend:
- Always have old sealant cut out, not covered
- Keep bleach and abrasives off the bead
- Have loose fittings fixed before resealing
- Run the fan after every shower
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.
About our remedial sealant in Palmer's Green
If a joint has been resealed and is leaking again, it’s worth a proper look. Send pictures when you ring 0345 464 0079 or send us an email, and say how long ago it was last done. If you have repeat leaks from the same joint and a second bead peeling off the first, we can put it right, on botched or over-sealed joints, failed movement joints and leaking tray & enclosure joints alike.
Homes around Palmer's Green are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Location
- Palmer's Green (TN12)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026

How the visit works
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a few hours, depending on how many layers have to come out. Somewhere like Palmer's Green needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- Move anything stored near the joints
- Mention any parking rules near the property
- Let us know about earlier repairs to the joints
Getting a quote
We quote each job on its own, so start by telling us what you need. Just ring 0345 464 0079 or drop us an email with the details and send pictures if you have them.
Related advice
Questions from Palmer's Green
Is Palmer's Green in your area for remedial sealant?
Yes. We work across London and the South East, and Palmer's Green is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
Do you work for landlords with property near Paddock Wood station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Do the sealants smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Can you reseal a split movement joint?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
What do you need from me for a quote?
Tell us what needs doing and where, plus photos if you have them. We’ll ask anything else we need to know.
Someone resealed my shower and it’s leaking again. Can you help?
Yes, usually. We check it’s the sealant and not the tray, valve or waste, then the joints are stripped and resealed.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Can you strip sealant from an acrylic tray safely?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
Bathrooms and kitchens in Palmer's Green
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Parish Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Paddock Wood station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Palmer's Green is about 6 miles east of Royal Tunbridge Wells, in Kent. From the centre of Palmer's Green to the outskirts, we cover remedial sealant for every kind of property. Our Kent coverage runs to 922 places, Palmer's Green among them. You can also see our page for Crawley, roughly 26 miles from Palmer's Green.
All of TN12 is covered for remedial sealant, from the main roads to the quietest streets. Other places close to Palmer's Green include Castle Hill (1 mile north-east), Pearson's Green (1 mile north-east), Horsmonden (1 mile south-east), Mile Oak (1 mile north) and Hazel Street (2 miles south). Within a short drive, we also cover Maidstone (9 miles north-east), Sevenoaks (13 miles north-west), Royal Tunbridge Wells (6 miles west), Tonbridge (7 miles north-west), Kings Hill (8 miles north) and Foley Park (10 miles north-east).
Near you in Palmer's Green
Locally, jobs take us to homes and businesses close to Halfway House Public House and Mascalls School and the streets around them. The nearest railway station is Paddock Wood station, about 2.3 miles north of the centre. A little further out are Old Scotney Castle (4.1 miles south) and The Hop Farm Museum (3.2 miles north). Green spaces nearby include Tudeley Woods RSPB reserve.
Towns and villages near Palmer's Green
Also in Palmer's Green
Different surfaces, different methods
Windows & doors
Some leaks around windows come from the wall or the window itself. We check the joint and tell you if it looks to be something else.
Over-sealed & botched joints
Thick, smeared sealant looks messy and hides problems. Taking it back shows what’s underneath, and then we reseal it neatly.
What sealant work can’t fix
To be straight with you, there are a few things sealant won’t fix:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Tiles that have come away from the wall
- A tray or worktop that needs refixing first
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly.
Where we work in Palmer's Green
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Botched or over-sealed joints
- Expansion joints
- Failed movement joints
- Leaking tray & enclosure joints
Landlord and commercial work in Palmer's Green
For anyone letting property in or around Palmer's Green, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Housing providers, facilities teams and property managers book us too in Palmer's Green and across Kent. Several sites can be quoted together.
Common problems we fix in Palmer's Green
One of the commonest remedial jobs is sealant on top of sealant. Silicone does not bond to silicone, so the top layer lifts and water and mould collect between the two.
Keep an eye out for these signs:
- Beads that never stuck properly
- Worktop sealant that has shrunk and split
- Products that weren’t meant for the joint
- Leaks that keep coming back after resealing
Schools such as Brenchley and Matfield Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Questions to ask before booking
- How long the guarantee is
- When the joint can take water or movement
- What happens if the job turns out different
- How much experience the applicator has
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
