Medway · England
Remedial sealant & repairs in Middle Stoke, Medway
Problem with your failed sealant joints in Middle Stoke? We cut out the old, prepare the joints and apply the right sealant.
- Torn expansion joints
- A second bead peeling off the first
- Worktop sealant that has shrunk and split
How we handle remedial sealant in Middle Stoke
Remedial work is what we do when sealant has failed or been done badly. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all have to come out. We work on expansion joints, leaking tray & enclosure joints and failed movement joints, and the jobs we see most are dark patches showing through the sealant and gaps opening along the back of the worktop.
Around Middle Stoke, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
You are covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Where
- Middle Stoke (ME3)
- Region
- Medway
- Cover
- A year, on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Bathrooms and kitchens in Middle Stoke
Middle Stoke is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of St Peter and St Paul, older homes can move a little, which is hard on rigid grout and tired sealant.
Middle Stoke is about 6 miles south-east of Canvey Island, in Medway. We carry out remedial sealant for householders, landlords and businesses in Middle Stoke, as part of our work across Medway. Our area takes in 68 places across Medway. For nearby work, see our Chelmsford page.
Work in ME3 works the same way as everywhere else we cover. Streets in the area include Burrows Lane and Grain Road, and we cover them all. If you’re just outside Middle Stoke, we cover Lower Stoke (1 mile north), Stoke (1 mile west), North Street (1 mile south-west), Allhallows (1 mile north) and St Mary Hoo (2 miles north-west). Further out, we also cover Gillingham (6 miles south-west), Chatham (8 miles south-west), Rochester (7 miles south-west), Rainham (6 miles south), Strood (8 miles south-west) and Luton (7 miles south-west).
Near you in Middle Stoke
Locally, jobs take us to homes and businesses close to The Nags Head pub and the streets around them. Open spaces near Middle Stoke include Bishop Saltings.
When something else is needed
To be straight with you, some problems need a different trade:
- A cracked shower tray or bath (that needs repair or replacing)
- Failed tanking or loose tiles behind the sealant
- Plumbing leaks behind walls or under trays
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly.
Joints and surfaces we work on
- Shrunken worktop sealant
- Expansion joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Failed movement joints
Landlords, agents and businesses in Middle Stoke
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
For anyone letting property in or around Middle Stoke, several properties can go on one quote. Send us the addresses and the work at each.
Nearby places to Middle Stoke
Other services in Middle Stoke
Different surfaces, different methods
Worktops & kitchens
A loose worktop splits its sealant. That needs refixing before resealing, which we’ll point out.
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Common problems we fix in Middle Stoke
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes split any bead that’s too stiff or too thin.
These are the problems we’re asked about most:
- Kitchen joints letting water behind the worktop
- Smears and lumps from a botched reseal
- Beads that never stuck properly
- Sealant applied over old sealant that has lifted
Schools such as Stoke Primary Academy are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Whether all the old sealant comes out first
- Whether you can choose the colour
- How long the guarantee is
- What preparation is included
How the visit works
On the day, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before any work starts. The work generally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Middle Stoke, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
Before we arrive
- Let us know about stairs, lifts or work at height
- Plan for the work area to be out of bounds to pets and children
- Clear the area around the work
Getting a quote
Asking for a quote is easy: tell us what needs doing and where. A few pictures by email make the job easier to understand.
Related advice
Middle Stoke: your questions answered
Is Middle Stoke in your area for remedial sealant?
Yes. We work across London and the South East, and Middle Stoke is part of that. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.
Is there a guarantee on remedial sealant in Middle Stoke?
All our work, in Middle Stoke and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Do you take out the old sealant first?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will tell you how long to leave the joint before we leave.
Are you insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Why it’s worth doing now in Middle Stoke
DIY removal often leaves scratches and a film of residue, and any film left behind stops new sealant sticking. Careful stripping is where most of our time goes. Around Middle Stoke, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
What you get with us
- A choice of colours where the product allows
- We leave the area clean and tidy
- Old sealant always removed completely
- A 12-month guarantee on all work
Take a look at what affects the cost or customer reviews.
How to look after the new joints
Aftercare is simple:
- Act on a lifting corner straight away
- Use a soft cloth, not a scourer, on silicone
- Check trays and worktops do not move
- Keep movement joints clear of mortar and paint
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Do not keep resealing the same joint. Get the cause found first, or the next bead will go the same way.