Southampton · England
Remedial sealant & repairs in Maybush, Southampton
Remedial sealant across Maybush and nearby, with old sealant always removed completely and a 12-month guarantee.
- Torn expansion joints
- Sealant applied over old sealant that has lifted
- Sealant peeling off a dusty or damp surface
How we handle remedial sealant in Maybush
Not every leak is a sealant leak. Cracked trays, leaking wastes and faulty valves often look like a sealant problem. If that is what we find, we’ll tell you rather than reseal something that will not fix it. Typical jobs include over-sealed joints coming away and decorators’ caulk around a bath or shower, across shrunken worktop sealant, leaking tray & enclosure joints and botched or over-sealed joints.
Even in a smaller place like Maybush, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
We stand behind the work with a one-year guarantee, so you are covered after we’ve gone.
- Where
- Maybush (SO16, SO15)
- Wider area
- Southampton
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Maybush questions
Can you help a landlord with a rental near Redbridge station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Is Maybush within the area you cover?
Yes, Maybush is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. Most jobs take a few hours, and we confirm the time with your quote.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Is remedial work guaranteed?
Yes, for 12 months. Where we have flagged another fault, it needs fixing for the joint to last.
What we cannot put right
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Movement from fittings that are not supported
- Tiles that have come away from the wall
- Sealant in an older building that needs testing for asbestos first
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
Where we work in Maybush
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
The process
Before we leave, we go over the finished joints with you. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on how much there is to do. For a job in Maybush, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Clear the area around the work
- Tell us about any water getting in
- For business premises, tell us about site rules or sign-in
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you are ready, call 0345 464 0079 or email us.
Related advice
What remedial sealant looks like in Maybush
Maybush is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Redbridge station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Homes close to St Peter's Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Maybush is about 3 miles east of Totton, in Southampton. For remedial sealant in and around Maybush, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We are based in Crawley and cover Southampton, Maybush included. 40 places in Southampton are on our list, large and small.
We cover every part of the SO16 and SO15 postcode area for remedial sealant and the streets around it. We cover properties on Link Road, Palm Road and Vine Road. We also cover the places around Maybush: Coxford (1 mile north-east), Hillyfields (1 mile north-west), Regents Park (1 mile south-east), Shirley (1 mile south-east) and Millbrook (1 mile south). Larger places within reach include Southampton (3 miles east), Townhill Park (4 miles east), Midanbury (4 miles east), Thornhill (5 miles east), Chartwell Green (4 miles east) and Harefield (5 miles east).
Local landmarks in Maybush
We work in homes and buildings around St James' Park, Bridge Tavern and Regents Park Community College. For rail, the closest station is Redbridge station, roughly 1.2 miles south-west of the centre. A little further out are Eling Experience (1.8 miles south-west) and Western Community Hospital (within half a mile south). The countryside around Maybush includes Testwood Lakes.
Why act early in Maybush
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. Where something else has failed, you’ll hear it from us. In an older home around Maybush, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
What you pay reflects the work, not guesswork. That’s why we ask about the job first and agree the price before starting.
Why book with us
- Homes, businesses and hotels
- ARBOMaster approved applicator
- You choose the colour before work begins
- 180+ five-star Google reviews
Take a look at what affects the cost and customer reviews.
What affects the cost of remedial sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The type of sealant required
- Whether there’s mould to deal with
- When we can work, for business premises
- Whether the work is at height
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, ring 0345 464 0079 or email us and we’ll give you an honest view and a quote.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- How we’d reach the joints
- What’s wrong with the joints now
- Whether it’s a home or a business
- Where the job is, and your postcode
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
For landlords and businesses
For anyone letting property in or around Maybush, several properties can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Report a tray that rocks or a worktop that lifts
- Air the bathroom so the sealant can dry
- Don’t wait for a small gap to become a leak
- Never seal over old silicone
Watch the joint over the first few weeks, particularly where the original failure was caused by movement. If anything changes, just phone 0345 464 0079 or send us an email.
A failing joint rarely gets better on its own. Each use pushes more water behind the bead, into floors, walls or ceilings. Sorting it early limits the damage.
What we’re called out for in Maybush
Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
Most people get in touch when they notice one of these:
- Beads that never stuck properly
- Decorators’ caulk around a bath or shower
- Black mould underneath the bead
- Gaps opening along the back of the worktop
If you look after a building such as Newlands Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Is the old sealant removed completely?
- Whether they’re fully insured
- When the joint can take water or movement
- How the surfaces are prepared before sealing