Kent · England
Remedial Sealant in Lydden
We cover Lydden for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- Decorators’ caulk around a bath or shower
- Smears and lumps from a botched reseal
- A shower that leaks however often it’s resealed
About our remedial sealant in Lydden
If a joint has been resealed and is leaking again, it’s worth a proper look. It helps to have pictures when you call 0345 464 0079 or email us, and say how long ago it was last done. If you have gaps opening along the back of the worktop and floor or wall movement joints that have failed, we can put it right.
For a small place like Lydden, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Our work is backed for twelve months.
- Location
- Lydden (CT15)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Remedial sealant in Lydden: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Kearsney station, botched sealant from a previous quick fix is easier to strip out between tenants. In the older streets around Church of St Mary Church of St Mary Virgin, walls and floors in older homes can move, and sealant and grout show it first.
Lydden is about 3 miles north-west of Dover, in Kent. Anywhere in CT15, we cover remedial sealant for homes and businesses. Lydden is one of 922 towns and villages in Kent we cover for remedial sealant. There’s also a page for Chelmsford, roughly 51 miles from Lydden.
All of CT15 is covered for remedial sealant, from the main roads to the quietest streets. We cover properties on St Marys Rise, Canterbury Road and The Close. We also cover the places around Lydden: Coldred (1 mile north), Ewell Minnis (1 mile south-west), Temple Ewell (1 mile south-east), Halfway Street (1 mile north-west) and Wolverton (2 miles south). Further out, we also cover Canterbury (11 miles north-west), Dover (3 miles south-east), Folkestone (6 miles south-west), Ramsgate (14 miles north-east), Deal (8 miles north-east) and Herne Bay (15 miles north).
What’s near Lydden
In Lydden, that means homes and buildings near Sladden Wood and Hope Inn. For rail, the closest station is Kearsney station, about 1.6 miles south-east. Other landmarks nearby include Dover Transport Museum (2.3 miles south-east) and Dover Castle (4.3 miles south-east). Not far away are Dover Western Heights.
What affects the cost of remedial sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How easy the joints are to reach
- Mould in or behind the old joints
- The number and length of the joints
- Any working-time requirements on site
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.
Asking for a quote
When you call or email, these details help:
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
- What’s wrong with the joints now
For remedial sealant in Lydden, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.
Questions from Lydden
I let a flat near Kearsney station. Can you help?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Do you cover Lydden for remedial sealant?
Yes. We work across London and the South East, and Lydden is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we will send you a clear quote.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can you fix a reseal that hasn’t worked?
Yes, normally. We check it’s the sealant and not the tray, valve or waste, then strip and reseal the joints.
What happens if the problem is the tray or the plumbing?
We will tell you. A cracked tray, faulty valve or leaking waste needs a different trade, so we will not pretend it will.
Do you work for hotels and businesses?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Will there be a smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will tell you how long to leave the joint.
When to call us in Lydden
All sealant wears out eventually. Over the years it shrinks, hardens and gets colonised by mould, especially in damp, poorly aired rooms. At that point it has to come out.
People generally contact us after spotting something like this:
- A shower that leaks however often it’s resealed
- Sealant peeling off a dusty or damp surface
- Torn expansion joints
- A second bead peeling off the first
Schools such as Lydden Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
What your quote should include
- How long to leave it before use
- What insurance they hold
- Is VAT in the price?
- What product goes in the joint
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What happens if it’s left?
A joint that has failed twice will fail again unless the cause is dealt with. Finding it, whether movement, water from elsewhere or an unsuitable product, ends the cycle. Around Lydden, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Why us?
- Trusted Arbo and Everbuild sealants
- Homes, businesses and hotels
- Rated 4.9 stars on Google
- We are fully insured
Take a look at how sealant jobs are priced and what customers say.
The process
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the amount of work. Somewhere as small as Lydden, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
Want a quote for remedial sealant? Please phone 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Read more
When something else is needed
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Movement from fittings that are not supported
- Water damage behind tiles that needs a tiler
- Plumbing leaks behind walls or under trays
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly before you book.
Surfaces we seal
- Shrunken worktop sealant
- Expansion joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Failed movement joints
Surface by surface
Movement & expansion joints
A movement joint must be able to stretch. We remove the failed sealant, fit backing and reseal with a low-modulus product.
Mouldy bath & shower sealant
Mould that has grown into silicone doesn’t clean out for good. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.