Kent · England
Coldred Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Coldred and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Beads that never stuck properly
- Caulk or the wrong sealant used in a wet area
- Torn expansion joints
Remedial sealant in Coldred
Water on the floor doesn’t always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that is what we find, we’ll tell you rather than reseal something that will not fix it. We work on failed movement joints, botched or over-sealed joints and expansion joints, and people most often call us about movement joints that have split or pulled away and beads that never stuck properly.
Around Coldred, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.
- Where
- Coldred (CT15)
- Region
- Kent
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
For landlords and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
FAQs for Coldred
Is Coldred in your area for remedial sealant?
Yes, Coldred is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and tell us what needs doing, and we will give you a clear quote.
Will you come out to Coldred?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you remove the old sealant?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What if the leak isn’t the sealant?
You’ll hear it from us. A cracked tray, faulty valve or leaking waste needs a different trade, and we will not reseal for the sake of it.
Can you match the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Can you do several jobs on one visit?
Yes. More than one area can be quoted together.
When it isn’t the sealant
We won’t take on work that will not last, so here’s what sealant can’t put right:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A cracked shower tray or bath (that needs repair or replacing)
- Water damage behind tiles that needs a tiler
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Expansion joints
- Failed movement joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
Why it’s worth doing now in Coldred
Adding more sealant is the usual quick fix, and it rarely works. It doesn’t grip the old layer, leaving the leak in place and one more layer to cut out later. Older cottages and farmhouses around Coldred can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email.
Why book with us
- Full insurance on every job
- We agree the colour with you first
- 180+ five-star Google reviews
- Every job guaranteed for a year
Read how sealant jobs are priced and customer reviews.
How the job changes by surface
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. All of it comes out, and the joint is treated and dried before anti-fungal sanitary silicone goes in.
Leaking trays & enclosures
A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. We check both before we reseal.
Coldred homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Shepherds Well station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. If you live in an older home near Church of St Pancras, older homes can move a little, which is hard on rigid grout and tired sealant. If you look after a building such as Lydden Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Coldred is about 4 miles north-west of Dover, in Kent. Jobs in Coldred get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Coldred is one of 922 towns and villages in Kent where we work for remedial sealant. There’s also a page for Chelmsford, roughly 51 miles from Coldred.
Every address in CT15 is within our area for remedial sealant. We also cover Sibertswold (1 mile north-west), Lydden (1 mile south), Waldershare (1 mile north-east), Halfway Street (1 mile west) and Eythorne (2 miles north-east). Further out, we also cover Canterbury (10 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (7 miles south-west), Ramsgate (13 miles north-east) and Broadstairs (15 miles north-east).
Near you in Coldred
We work in homes and buildings around The Bell Inn. Coldred’s nearest station is Shepherds Well station, roughly 1.1 miles north-west of the centre. A little further out are Dover Castle (4.8 miles south-east) and Dover Transport Museum (2.6 miles south-east). Not far away are Dover Western Heights.
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Keep bleach and abrasives off the bead
- Get the cause of a repeat leak found before resealing
- Air the bathroom so the sealant can dry
- Don’t add new sealant on top of old
Clean gently: a mild cleaner and a soft cloth, with no blades or scourers.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
What happens on the day
You do not need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the work takes a few hours for most joints, depending on how much old sealant has to come out for a typical job. For a village or hamlet like Coldred, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
- Keep pets and children clear of the area while we work
How to get a quote
For a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Related advice
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.