West Berkshire · England
Remedial sealant & repairs in Lambourn, West Berkshire
Our applicators work in Lambourn on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- Gaps opening along the back of the worktop
- Repeat leaks from the same joint
- Over-sealed joints coming away
Remedial sealant around Lambourn
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Schools such as Lambourn CofE Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Lambourn is about 7 miles south-west of Wantage, in West Berkshire. We provide remedial sealant to homes and businesses in Lambourn and nearby. Across West Berkshire, we cover 155 places, and Lambourn is one of them. Our Oxford page covers work nearby.
Here we cover the RG17 postcode area for remedial sealant. We cover properties on High Street, Station Road and Chapel Lane. Other places close to Lambourn include Sheepdrove (1 mile north-east), Upper Lambourn (1 mile north-west), Westcot (6 miles north), Sparsholt (6 miles north) and Kingston Lisle (6 miles north). Larger places within reach include Newbury (12 miles south-east), Thatcham (14 miles south-east), Speenhamland (11 miles south-east), Hungerford (7 miles south), Shaw (12 miles south-east) and Wash Common (12 miles south-east). Lambourn is one of the larger places we cover in West Berkshire.
What’s near Lambourn
We work in homes and buildings around The George pub. The countryside around Lambourn includes Watts Bank and Rams Hill.
How we handle remedial sealant in Lambourn
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are ARBOMaster approved and fully insured, and every remedial job comes with a 12-month guarantee. We are often asked to deal with sealant peeling off a dusty or damp surface and thick, messy sealant smeared over tiles, on botched or over-sealed joints, failed movement joints and shrunken worktop sealant.
Smaller places like Lambourn still have plenty of bathrooms that work hard every day. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Where
- Lambourn (RG17)
- Wider area
- West Berkshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What we are called out for in Lambourn
Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
People usually contact us after spotting one of these:
- Thick, messy sealant smeared over tiles
- Dark patches showing through the sealant
- Over-sealed joints coming away
- A shower that leaks however often it’s resealed
Homes close to Church of St Michael and All Angels include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- What product goes in the joint
- Is the old sealant removed completely?
- Is VAT in the price?
- What happens if they find a problem under the old sealant
Nearby places to Lambourn
Also in Lambourn
Common questions in Lambourn
Is Lambourn within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is there a guarantee on remedial sealant in Lambourn?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
What if resealing won’t fix my leak?
We will tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing won’t fix it, so we won’t pretend it will.
Someone sealed over the old bead. Can you fix it?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned.
What information do you need?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
Can you match the sealant colour?
In most cases you can choose. We’ll explain which colours are available.
How it works
We keep the work tidy and contained to the joints we are treating, so you can carry on as normal. Expect the work to take a few hours for a typical bath or shower, longer where several layers have been applied, and we tell you how long to leave it before we go. For a job in Lambourn, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We look at how the sealant has failed and check for movement or a leak path.
- We strip the joint completely, removing any layers below.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Move anything stored near the joints
- Tell us about any water getting in
- Tell us if parking is tricky
Getting a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
What sealant work cannot fix
We’ll always be straight with you, so here’s what new sealant won’t do:
- A leaking trap, valve or supply pipe
- A tray or worktop that needs refixing first
- Water damage behind tiles that needs a tiler
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Surfaces we seal
- Leaking tray & enclosure joints
- Failed movement joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Botched or over-sealed joints
- Expansion joints
Why it’s worth doing now in Lambourn
DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. In an older home around Lambourn, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- Sanitary silicone with an anti-fungal additive in wet areas
- Full insurance on every job
- Neat joints and a tidy finish
- 4.9 on Google from 180+ five-star reviews
Surface by surface
Leaking trays & enclosures
A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. Both are checked before any new sealant goes on.
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. We strip it, degrease the joint and reseal in a colour to suit.
What affects the cost of remedial sealant
There’s no set price list, because jobs vary so much. The quote depends on:
- When we can work, for business premises
- Whether the work is at height
- The number and length of the joints
- How many areas need sealing
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What we need to know
When you contact us, these details help:
- The problem you’ve noticed
- How we’d reach the joints
- Where the job is, and your postcode
- The rough size of the job
We quote each job on its own, so start by telling us what you need. Just phone 0345 464 0079 or email us with the details, and pictures are welcome.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.