Windsor and Maidenhead · England
Remedial Sealant in Lake End
We cover Lake End for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- A shower that leaks however often it’s resealed
- Sealant applied over old sealant that has lifted
- Kitchen joints letting water behind the worktop
Lake End homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you live in an older home near Church of St James, older homes can move a little, which is hard on rigid grout and tired sealant. If you look after a building such as Cippenham Infant School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Rented homes near Burnham station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Lake End is about 2 miles west of Slough, in Windsor and Maidenhead. From the centre of Lake End to the outskirts, we cover remedial sealant for every kind of property. Across Windsor and Maidenhead, we cover 57 places, and Lake End is one of them. Our Reading page covers work nearby (14 miles or so).
Every address in SL4 is within our area for remedial sealant, from the main roads to the quietest streets. We cover properties on Lake End Road and Ashford Lane. We also cover Dorney (1 mile south-east), Dorney Reach (1 mile west), Huntercombe (1 mile north-east), Cippenham (1 mile east) and Burnham (1 mile north). Further out, we also cover Maidenhead (3 miles west), Windsor (3 miles south-east), Boyn Hill (3 miles west), North Ascot (6 miles south), Cookham (4 miles north-west) and Furze Platt (4 miles north-west).
What’s near Lake End
In Lake End, that means homes and buildings near The Pineapple Public House, Haymill Valley and The E-Act Burnham Park Academy. For rail, the closest station is Burnham station, about 1.2 miles north-east of the centre. A little further out are Windsor Castle (3.1 miles south-east) and The History On Wheels Museum (1.6 miles south-east). Open spaces near Lake End include Taplow Lake and Bray Pit.
Remedial sealant in Lake End
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. If you’re dealing with sealant applied over old sealant that has lifted and leaks that keep coming back after resealing, we can put it right.
In a village or hamlet like Lake End, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Lake End (SL4)
- Wider area
- Windsor and Maidenhead
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Also near Lake End
What else we do in Lake End
What happens if it’s left?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we will tell you. Around Lake End, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why Lake End customers choose us
- Quality sealants from Arbo and Everbuild
- Sealant colour chosen to suit
- ARBOMaster approved applicator
- Over 20 years’ experience
Take a look at what affects the cost or what customers say.
Landlord and commercial work in Lake End
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Deal with small splits early
- Don’t add new sealant on top of old
- Get the cause of a repeat leak found before resealing
- Never fill a movement joint with mortar or grout
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.
FAQs for Lake End
Do you cover smaller places like Lake End?
Yes. Lake End is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do remedial sealant in Lake End?
Yes. We work across London and the South East, and Lake End is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Do you offer different sealant colours?
In most cases you can choose. We will tell you which colours the right product comes in.
Can you take off two layers of silicone?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s the only way the new joint will last.
How long before the joint can be used?
Many sealants skin over quickly but take longer to cure fully. We’ll give you the cure time for the product we used.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.
What should I tell you?
Tell us what needs doing and where, plus photos if you have them. If we need more, we’ll ask.
What the job involves on each surface
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.
How it works
We keep the work tidy and contained to the area we’re working on, so you can get on with your day. The job usually takes a few hours for a typical bath or shower, longer where several layers have been applied, and we tell you how long to leave it before we go. In a small place like Lake End, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Preparing for the visit
- Keep pets and children clear of the area while we work
- Move anything stored near the joints
- Let us know about parking restrictions
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Read more
What affects the quote in Lake End
We quote each job individually. This is what makes a difference:
- Mould in or behind the old joints
- The old material and how stubborn it is
- Which sealant suits the joint
- The number and length of the joints
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
- Access, such as stairs, a lift or height
- Roughly how big the job is
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or email us and describe the job and send pictures if you have them.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracks in the fitting rather than the joint
- Failed tanking or loose tiles behind the sealant
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer.
Joints and surfaces we work on
- Shrunken worktop sealant
- Expansion joints
- Leaking tray & enclosure joints
- Failed movement joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints