Windsor and Maidenhead · England
Remedial sealant & repairs in Bray, Windsor and Maidenhead
Removing failed, mouldy or leaking sealant and putting it right for householders, landlords and businesses in Bray. Fully insured, ARBOMaster approved and guaranteed for a year.
- Worktop sealant that has shrunk and split
- Caulk or the wrong sealant used in a wet area
- Sealant applied over old sealant that has lifted
How we quote for remedial sealant
You’ll get a clear quote before we start. It’s based on:
- Whether there’s mould to deal with
- Working hours on commercial sites
- The old material and how stubborn it is
- The number and length of the joints
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
When you call or email, it’s useful to know:
- Roughly how big the job is
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
For remedial sealant in Bray, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Remedial sealant in Bray
Remedial jobs in Bray usually fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. We work on shrunken worktop sealant, mouldy bath & shower sealant and failed movement joints, and people most often call us about a shower that leaks however often it’s resealed and thick, messy sealant smeared over tiles.
Being in a small place like Bray makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Bray (SL6)
- Region
- Windsor and Maidenhead
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Bray
Also in Bray
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
If you manage several properties in or around Bray, several properties can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Bathrooms and kitchens in Bray
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. There are hotels and other places to stay in and around Bray. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For an older house near a landmark such as St Michael's Church, walls and floors in older homes can move, and sealant and grout show it first. If you look after a building such as Dorney School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Taplow station? Then a joint that keeps failing is best fixed properly while the property is empty.
Bray is about 2 miles south-east of Maidenhead, in Windsor and Maidenhead. Whether you are in the middle of Bray or further out, remedial sealant is available for homes and businesses alike, from flats and houses to offices and hotels. 57 places in Windsor and Maidenhead are on our list, from the larger towns to small villages. We also work in Reading, about 13 miles from Bray.
Postcode districts we cover here for remedial sealant: SL6. You will find streets such as High Street, Old Mill Lane and Beaufort Place. If you are just outside Bray, we cover Dorney Reach (1 mile east), Lake End (1 mile east), Taplow (2 miles north), Dorney (2 miles east) and Hitchambury (2 miles north-east). Larger places within reach include Windsor (4 miles south-east), North Ascot (6 miles south), Cookham (4 miles north), Furze Platt (3 miles north-west), Dedworth (3 miles south-east) and Broomhall (9 miles south).
Near you in Bray
Locally, jobs take us to homes and businesses close to Braywick Park, The Fat Duck pub and Desborough College, among other places. The closest station to Bray is Taplow station, roughly 1.3 miles north-east of the centre. Nearby you’ll also find The Reitlinger Bequest Museum (1.1 miles north) and Windsor Castle (4.3 miles south-east). For a walk, there’s Bray Pit and Taplow Lake.
What happens on the day
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Bray needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- The joint is cleaned, treated for mould and left to dry.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- Mention any tricky access
- Keep pets and children clear of the area while we work
- For indoor joints, keep the area dry beforehand if you can
Get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, ring 0345 464 0079 or drop us an email.
Advice
Common questions in Bray
Do you work for landlords with property near Taplow station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Do you take on hotel work around Bray?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
When is the sealant fully cured?
Cure times vary by product and the temperature. We tell you how long to leave it before we go.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. We’ll take all the sealant out, look for why it failed and reseal it properly.
Where do you work from?
Our base is Crawley. We work across South East England, London and Scotland.
What happens if the problem is the tray or the plumbing?
Then we explain what we have found. A plumber or fitter may be needed before any new sealant goes on.
Will there be a smell?
Some sealants have a smell while they cure. Ventilation helps.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Do not point over movement joints
- Run the fan after every shower
- Keep an eye on the ceiling below the bathroom
- Use a soft cloth, not a scourer, on silicone
Watch the joint over the first few weeks, especially if movement was the problem. Should anything change, phone 0345 464 0079 or email us.
Signs to act on: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
Different surfaces, different methods
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, tray edges and screen profiles included.
Movement & expansion joints
Joints filled with mortar, grout or rigid filler can’t move. We rake that out where it can be removed and seal with a flexible product.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What we can’t put right
We will not take on work that won’t last, so here’s what sealant can’t put right:
- Sealant in an older building that needs testing for asbestos first
- A cracked shower tray or bath (that needs repair or replacing)
- A leaking trap, valve or supply pipe
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Surfaces we seal
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Shrunken worktop sealant
- Botched or over-sealed joints