West Berkshire · England
Remedial Sealant in Inkpen
Remedial sealant across Inkpen and nearby, with old sealant always removed completely and a 12-month guarantee.
- Mould trapped under a layer of silicone
- Floor or wall movement joints that have failed
- Caulk or the wrong sealant used in a wet area
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Remedial sealant in Inkpen, done properly
Removing failed sealant is the hardest part of the job. Every layer is cut out, the residue cleaned off and the joint degreased, taking care not to scratch the surfaces around it. Only then can new sealant bond. Common call-outs are for wide, uneven beads that look worse than the old ones and a second bead peeling off the first, across botched or over-sealed joints, failed movement joints and leaking tray & enclosure joints.
Being in a small place like Inkpen makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Inkpen (RG17)
- Region
- West Berkshire
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What remedial sealant looks like in Inkpen
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Inkpen Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Kintbury station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. Homes close to Church of St Michael include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Inkpen is about 6 miles west of Newbury, in West Berkshire. Whether you are in the middle of Inkpen or further out, remedial sealant is available for homes and businesses alike. Our West Berkshire coverage runs to 155 places, Inkpen among them. For nearby work, see our Reading page, about 22 miles away.
All of RG17 is within our area for remedial sealant. Streets in the area include Folly Road, Post Office Road and Robins Hill. Neighbouring places we cover for remedial sealant include Inkpen Common (1 mile south-east), Upper Green (1 mile south), Hell Corner (1 mile east), Lower Green (1 mile west) and Kintbury (2 miles north-east). Further out, we also cover Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (3 miles north-west), Lambourn (9 miles north) and Shaw (7 miles east).
What’s near Inkpen
Typical jobs here are in homes near Crown and Garter pub. For rail, the closest station is Kintbury station, about 1.9 miles north-east. Well-known places in the area include Hamstead Marshall 3 (3.3 miles north-east). The countryside around Inkpen includes Kintbury Newt Ponds and Inkpen Hill.
Landlord and commercial work in Inkpen
Letting agents and landlords in Inkpen can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Different surfaces, different methods
Mouldy bath & shower sealant
Black mould inside the bead will not scrub out. All of it comes out, and the joint is treated and dried before anti-fungal sanitary silicone goes in.
Worktops & kitchens
A loose worktop splits its sealant. It needs fixing down first, and we’ll tell you if we find it.
How it works
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take a few hours for most joints, depending on how much old sealant has to come out. In a small place like Inkpen, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at how the sealant has failed and check for movement or a leak path.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- We use the right backing and sealant for any joint that moves.
- We tool the joint and tell you about anything else that needs attention.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Mention any sign-in or site rules at work premises
- Try not to wet indoor joints just before the visit
How to get a quote
Need a quote? Please call 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Advice
Quotes for remedial sealant in Inkpen
Your quote is based on your job. We take into account:
- The product the joint needs
- The number and length of the joints
- How easy the joints are to reach
- The old material and how stubborn it is
What it costs depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins, so you know where you stand.
Asking for a quote
Before you ask for a quote, have a think about:
- Where the job is, and your postcode
- Photos by email, if that’s easy
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
If you are in Inkpen and need remedial sealant, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.
Towns and villages near Inkpen
Also in Inkpen
Common questions in Inkpen
I let a flat near Kintbury station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Do you cover Inkpen for remedial sealant?
Yes. We work across London and the South East, and Inkpen is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Does remedial work come with a guarantee?
Yes. Every job comes with our one-year guarantee.
Can you do several jobs on one visit?
Yes, we can. More than one area can be quoted together.
Can you match the sealant colour?
We’ll suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Aftercare tips
So the new joints stay in good condition:
- Have loose fittings fixed before resealing
- Keep movement joints clear of mortar and paint
- Never seal over old silicone
- Run the fan after every shower
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into floors, walls or ceilings. Sorting it early limits the damage.
What sealant work can’t fix
Before booking, it’s worth knowing the limits:
- A tray or bath that’s cracked
- Plumbing leaks behind walls or under trays
- Tiles that have come away from the wall
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Surfaces we seal
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints