Kent · England
Hale Street Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Hale Street. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Sealant that came away because the surface wasn’t prepared
- Gaps opening along the back of the worktop
- A second bead peeling off the first
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on the amount of work. In a small place like Hale Street, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
How to prepare
- Let us know about earlier repairs to the joints
- Mention any parking rules near the property
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or send us an email.
Read more
Remedial sealant in Hale Street
The wrong product in the wrong joint won’t last, however tidy it looks. Out it comes, and in goes a sealant suited to the job. If you are dealing with sealant applied over old sealant that has lifted and gaps opening along the back of the worktop, we can help.
Being in a small place like Hale Street makes no difference to the job itself: it just means planning the journey and access beforehand. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
You are covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or email us.
- Where
- Hale Street (TN12)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Leave it or put it right?
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. Around Hale Street, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.
What you get with us
- 12-month guarantee on every job
- We agree the colour with you first
- 4.9 on Google from 180+ five-star reviews
- We’re fully insured
Signs you need remedial sealant in Hale Street
Movement tears sealant that isn’t designed for it. Flexing baths, rocking trays and building movement joints split any bead that is too stiff or too thin.
It’s worth asking for a quote if you see:
- Thick, messy sealant smeared over tiles
- Leaks that keep coming back after resealing
- Sealant applied over old sealant that has lifted
- Sealant that came away because the surface wasn’t prepared
Homes close to Church of the Holy Trinity include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- What insurance they hold
- What preparation is included
- What happens if they find a problem under the old sealant
- How long the guarantee is
Common questions in Hale Street
Will you come out to Hale Street?
Yes. Hale Street is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Yalding station. Can you help?
Yes, we work for landlords and agents. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will send you a clear quote.
Do you fix expansion and movement joints?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
Someone resealed my shower and it’s leaking again. Can you help?
Yes, generally. We check it’s the sealant and not the tray, valve or waste, then strip and reseal the joints.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Are you fully insured?
Yes. Mr Mastic is fully insured.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Can I choose the sealant colour?
Most of the time, yes. We will tell you which colours the right product comes in and agree one before any work starts.
Towns and villages near Hale Street
What else we do in Hale Street
Hale Street homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you look after a building such as East Peckham Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to Yalding station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Hale Street is about 5 miles east of Tonbridge, in Kent. Every kind of property in Hale Street can book us for remedial sealant, old or new, large or small. The work is guaranteed for a year. Our Kent coverage runs to 922 places, Hale Street among them. There’s also a page for Crawley, about 26 miles away.
Our applicators cover all of the TN12 postcode area for remedial sealant and the streets around it. Streets in the area include Hale Court, Hale Street and Pattenden Gardens, all of which we cover. We also cover the places around Hale Street: Branbridges (1 mile south), East Peckham (1 mile south-west), Peckham Bush (1 mile north-west), Snoll Hatch (1 mile south-west) and Beltring (1 mile south). Within a short drive, we also cover Maidstone (7 miles north-east), Sevenoaks (10 miles north-west), Royal Tunbridge Wells (8 miles south-west), Gravesend (15 miles north), Tonbridge (5 miles west) and Northfleet (15 miles north).
Landmarks near Hale Street
Typical jobs here are in homes near The Harp pub, among other places. The nearest railway station is Yalding station, about 0.9 miles north-east of the centre. Other landmarks nearby include Teapot Island (1 mile east) and Oakwood Hospital (5.2 miles north-east).
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Report a tray that rocks or a worktop that lifts
- Run the fan after every shower
- Act on a lifting corner right away
- Find out why the sealant failed first
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Landlords, agents and businesses in Hale Street
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We also work for property managers and facilities teams in Hale Street and across Kent. We can quote a run of properties together, and we are fully insured for the work.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Older mastics that may need an asbestos check before removal
- Movement from fittings that aren’t supported
- Cracks in the fitting rather than the joint
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before you book.
What we seal
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Failed movement joints