Kent · England
Fleeden Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Fleeden and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Repeat leaks from the same joint
- Black mould underneath the bead
- Sealant applied over old sealant that has lifted
Landlords, agents and businesses in Fleeden
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
We also work for property managers and facilities teams in Fleeden and across Kent. We can quote a run of properties together.
How we handle remedial sealant in Fleeden
Two decades of sealant work means we recognise most failures quickly. We are fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. Common call-outs are for a shower that leaks however often it’s resealed and dark patches showing through the sealant, on mouldy bath & shower sealant, botched or over-sealed joints and failed movement joints.
Homes around Fleeden are mostly houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Each job carries a 12-month guarantee, large or small.
- Place
- Fleeden (TN26)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Fleeden: your questions answered
Do you cover Fleeden for remedial sealant?
Yes, Fleeden is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Do you cover smaller places like Fleeden?
Yes. Fleeden is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Will there be a smell?
Sometimes, a little. Any smell clears as the sealant cures.
How much does remedial sealant cost in Fleeden?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before work begins.
Are you insured?
Yes. Mr Mastic is fully insured.
Can you fix a reseal that hasn’t worked?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, and we deal with the cause first.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we are fully insured.
Surface by surface
Mouldy bath & shower sealant
Mould that has grown into silicone doesn’t clean out for good. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. That needs refixing before resealing, which we’ll point out.
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Keep bleach and abrasives off the bead
- Check ceilings under showers for marks
- Run the fan after every shower
- Check trays and worktops do not move
Keep the room ventilated: use the extractor or open a window after showering.
If a joint has failed more than once, stop resealing it. Get the cause found first, otherwise the next attempt will fail too.
Common problems we fix in Fleeden
A lot of failed joints have been sealed over rather than replaced. Silicone does not bond to silicone, so the new layer peels, and damp and mould settle between them.
Common reasons people contact us are:
- Mould trapped under a layer of silicone
- Torn expansion joints
- Worktop sealant that has shrunk and split
- Thick, messy sealant smeared over tiles
For site and facilities teams at buildings such as John Wallis Academy, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
- Which colour the sealant will be
Bathrooms and kitchens in Fleeden
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Rented homes near Pluckley station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Fleeden is about 3 miles west of Ashford, in Kent. Fleeden gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our Kent coverage runs to 922 places, Fleeden among them. You can also see our page for Crawley, roughly 43 miles from Fleeden.
Every address in TN26 is within our area for remedial sealant. Other places close to Fleeden include Daniel's Water (1 mile north), Chilmington Green (1 mile east), Great Chart (1 mile north-east), Shadoxhurst (2 miles south) and Stanhope (2 miles east). Further out, we also cover Maidstone (15 miles north-west), Ashford (3 miles east), Sittingbourne (15 miles north), Faversham (13 miles north), Hythe (13 miles east) and Davington (13 miles north).
Landmarks near Fleeden
Locally, jobs take us to homes and businesses close to Ashford Community Woodland. The closest station to Fleeden is Pluckley station, roughly 2.8 miles north-west of the centre. Other landmarks nearby include County Square (3.1 miles east) and William Harvey Hospital (4.9 miles east). Open spaces near Fleeden include Orlestone Forest.
Leave it or put it right?
Another bead over the top won’t fix a failed joint. It does not grip the old layer, so the leak carries on and there’s now more to remove. In a small place like Fleeden, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
What you get with us
- White, clear, grey or coloured to suit, where the product allows
- Experience in homes, commercial sites and hotels
- Colour picked to suit the job
- 180+ five-star Google reviews
Take a look at what affects the cost or our reviews.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
What we do, step by step
On the day, we look over the joints with you first. Surfaces next to the work are protected before work begins. The work usually takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Fleeden, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Let us know about parking restrictions
- Clear items away from the joints we are working on
Getting a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.