Kent · England
Remedial Sealant in Etchinghill
Removing failed, mouldy or leaking sealant and putting it right in Etchinghill, with a 12-month guarantee on every job. Ask us for a quote.
- Worktop sealant that has shrunk and split
- Wide, uneven beads that look worse than the old ones
- Movement joints that have split or pulled away
Remedial sealant in Etchinghill
Getting old sealant out properly is slow, careful work. Every layer is cut out, the residue cleaned off and the joint degreased, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. We’re often asked to deal with gaps opening along the back of the worktop and decorators’ caulk around a bath or shower, on leaking tray & enclosure joints, expansion joints and mouldy bath & shower sealant.
Being in a small place like Etchinghill makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Your job is guaranteed for a year, as with all our work.
- Location
- Etchinghill (CT18)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- A leaking trap, valve or supply pipe
- Water damage behind tiles that needs a tiler
- A cracked shower tray or bath (that needs repair or replacing)
If you’re not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Surfaces we seal
- Failed movement joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
Questions from Etchinghill
Is Etchinghill in your area for remedial sealant?
Yes. Our work covers London and the South East, and Etchinghill is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
Do you cover smaller places like Etchinghill?
Yes, Etchinghill is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is remedial work guaranteed?
Yes. You get our 12-month guarantee.
Can you remove old sealant without damaging the bath?
Yes, with care. We cut and lift the old sealant with tools suited to the surface, and the residue is cleaned away. We point out any damage that’s already there.
What does remedial sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or email us and tell us what needs doing and where.
How long does remedial resealing take?
It takes a few hours for most joints, depending on how much old sealant has to come out. We’ll give you a timescale when we quote.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Can you match the sealant colour?
Normally, yes. Sealants come in white, clear, grey and other colours, and we agree the colour with you before we start.
What affects the cost of remedial sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Any working-time requirements on site
- Whether the work is at height
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
Doing several joints on one visit is generally more efficient than separate visits. You will get one clear quote for the whole job.
Asking for a quote
To help us quote quickly, please include:
- Where the property is
- The type of property
- Access, such as stairs, a lift or height
- A few pictures by email, if you can
Every job is quoted individually, so start by telling us what you need. Simply phone 0345 464 0079 or drop us an email and describe the job and send pictures if you have them.
The process
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Etchinghill, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- Let us know about earlier repairs to the joints
Get a quote
Need a quote? Please ring 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
How the job changes by surface
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, then reseal neatly.
Worktops & kitchens
Kitchen joints hold grease and residue, so cleaning takes longer than in a bathroom before resealing.
Landlords, agents and businesses in Etchinghill
Letting agents and landlords in Etchinghill can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Bathrooms and kitchens in Etchinghill
Etchinghill is within about 3 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For site and facilities teams at buildings such as Lyminge Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Sandling station, a joint that keeps failing is best fixed properly while the property is empty.
Etchinghill is about 3 miles north of Hythe, in Kent. For remedial sealant in and around Etchinghill, it’s easy to get a quote: please ring 0345 464 0079 or email us. We’re based in Crawley and cover Kent, Etchinghill included. Our Kent coverage runs to 922 places, Etchinghill among them. You can also see our page for Chelmsford, about 51 miles away.
Every address in CT18 is covered for remedial sealant, from the main roads to the quietest streets. If you need remedial sealant at a property on St Marys Close, Meriden Walk and St Marys Drive or a nearby road, we can help. Neighbouring places we cover for remedial sealant include Lyminge (1 mile north), Postling (1 mile west), Woodland (2 miles north-west), Skeete (2 miles north-west) and Ottinge (2 miles north). Larger places within reach include Ashford (10 miles west), Canterbury (12 miles north), Dover (9 miles east), Folkestone (4 miles south-east), Deal (15 miles north-east) and Hythe (3 miles south).
Near you in Etchinghill
In Etchinghill, that means homes and buildings near Brockhill Park Performing Arts College and the streets around them. For rail, the closest station is Sandling station, about 2 miles south-west of the centre. A little further out are Royal Victoria Hospital (3.8 miles south-east) and Elham Valley Countryside Centre And Railway Museum (1.4 miles south-east). For a walk, there’s Tolsford Hill.
Why act early in Etchinghill
Another bead over the top will not fix a failed joint. It doesn’t grip the old layer, leaving the leak in place and one more layer to cut out later. Older cottages and farmhouses around Etchinghill can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why book with us
- Full insurance on every job
- Colour picked to suit the job
- An ARBOMaster approved applicator
- A 12-month guarantee on all work
Take a look at what affects the cost and what customers say.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Use a soft cloth, not a scourer, on silicone
- Check trays and worktops do not move
- Keep the room well ventilated
- Do not wait for a small gap to become a leak
Watch the joint over the first few weeks, especially if movement was the problem. Should anything change, call 0345 464 0079 or send us an email.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into floors, walls or ceilings. Sorting it early limits the damage.