West Sussex · England
Easebourne Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for Easebourne, backed by a one-year guarantee. Call for a quick quote.
- Sealant applied over old sealant that has lifted
- Sealant that came away because the surface wasn’t prepared
- Worktop sealant that has shrunk and split
Remedial sealant in Easebourne
Water on the floor does not always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. When the fault is elsewhere, we say so instead of resealing for the sake of it. Typical jobs include decorators’ caulk around a bath or shower and floor or wall movement joints that have failed, on failed movement joints, shrunken worktop sealant and leaking tray & enclosure joints.
Being in a small place like Easebourne makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Our work is backed for twelve months.
- Place
- Easebourne (GU29)
- Wider area
- West Sussex
- Guarantee
- One year on every job
- Price
- A clear price before we start
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Look for stains below bathrooms now and then
- Deal with small splits early
- Get the cause of a repeat leak found before resealing
- Always have old sealant cut out, not covered
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
Easebourne questions
Will you come out to Easebourne?
Yes, Easebourne is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you do remedial sealant in Easebourne?
Yes. Our work covers London and the South East, and Easebourne is part of that. You can ring 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear quote.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can I add another job to the visit?
Yes. More than one area can be quoted together.
Someone sealed over the old bead. Can you fix it?
Yes. Both layers come out; over-sealing fails because silicone will not bond to silicone.
Do I have to be there?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
Can you remove old sealant without damaging the bath?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
When is the sealant fully cured?
That depends on the sealant used, so follow the cure time we give you.
Different surfaces, different methods
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. We strip it, degrease the joint and reseal.
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, matched to the frame colour.
How we quote for remedial sealant
The price is agreed before any work begins. It’s based on:
- Which sealant suits the joint
- Whether the work is at height
- How many areas need sealing
- The size of the job
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- Access, such as stairs, a lift or height
- Whether it has been sealed before
We quote each job on its own. Simply call 0345 464 0079 or send us an email and describe the job.
How it works
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and tidy away. Most jobs take a few hours, depending on how many layers have to come out. Somewhere as small as Easebourne, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at how the sealant has failed and check for movement or a leak path.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- Keep children and pets away from the work area
- Tell us if parking is tricky
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
If you’re in Easebourne and need remedial sealant, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Related advice
Bathrooms and kitchens in Easebourne
Easebourne has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Schools such as Easebourne CofE Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. In the older streets around The Parish Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first.
Easebourne is about 9 miles east of Petersfield, in West Sussex. For remedial sealant in and around Easebourne, please phone 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover West Sussex, Easebourne included. Across West Sussex, we cover 371 places, Easebourne among them. Portsmouth is on our list too, around 20 miles away.
Here we cover the GU29 postcode area for remedial sealant. Streets in the area include Fox Road, Hanover Court and Highfield Close, all of which we cover. Neighbouring places we cover for remedial sealant include Midhurst (1 mile south-west), West Lavington (1 mile south), Woolbeding (1 mile west), Bepton Common (2 miles south-west) and Cocking Causeway (2 miles south). Within a short drive, we also cover Bognor Regis (14 miles south), Chichester (11 miles south), Littlehampton (15 miles south-east), Emsworth (13 miles south-west), Storrington (13 miles south-east) and Billingshurst (12 miles east).
Local landmarks in Easebourne
Typical jobs here are in homes near Midhurst Rother College, Midhurst Intermediate School and Page's Stores The White Horse Inn, among other places. Nearby you will also find Midhurst Community Hospital (less than half a mile south-west) and Lodsworth Castle (2.8 miles east). For a walk, there’s Blackdown and Cooksbridge Meadow.
Also near Easebourne
Also in Easebourne
For landlords and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
When something else is needed
It helps to know what we can’t do:
- Plumbing leaks behind walls or under trays
- A tray or bath that’s cracked
- A bath, tray or worktop that moves until it’s properly fixed
If you’re not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Expansion joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.