Kent · England
Remedial sealant & repairs in Ditton, Kent
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Ditton and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Sealant peeling off a dusty or damp surface
- Smears and lumps from a botched reseal
- Dark patches showing through the sealant
Common questions in Ditton
Do you work for landlords with property near Aylesford station?
Yes, we work for landlords and agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Do you cover smaller places like Ditton?
Yes. Ditton is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you fix a reseal that hasn’t worked?
Yes. We check it’s the sealant and not the tray, valve or waste, then strip and reseal the joints.
What if resealing won’t fix my leak?
That’s why we look for the cause first. If the fault is elsewhere, you will know before any work is done.
How long does the work take?
Allow a few hours, depending on how many layers have to come out. We’ll give you a timescale when we quote.
Can you match the sealant colour?
We will suggest a colour to suit the surroundings. The product needed can limit the range.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Do you do commercial work?
Yes. We’ve worked for hotels, offices and other businesses and we are fully insured.
How we handle remedial sealant in Ditton
In Ditton, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. If you have sealant that came away because the surface wasn’t prepared and movement joints that have split or pulled away, we can help, on botched or over-sealed joints, expansion joints and mouldy bath & shower sealant alike.
Smaller places like Ditton still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Ditton (ME20)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Leave it or put it right?
Ripping out a bathroom isn’t generally needed. If the bath, tray and tiles are sound, remedial resealing generally puts it right. Where something else has failed, you will hear it from us. In a smaller place like Ditton, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first.
Why Ditton customers choose us
- 4.9 on Google from 180+ five-star reviews
- Full insurance on every job
- Tidy, careful work
- Old sealant always removed completely
Read what affects the cost and our reviews.
How it works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for most joints, depending on how much old sealant has to come out. Parking around Ditton is normally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Mention if the joints have been sealed before
- Tell us about any water getting in
- Mention any parking rules near the property
How to get a quote
We do not publish a price list. Instead, we give you a clear quote for your job. To get started, call 0345 464 0079 or email us.
Advice
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep an eye on the ceiling below the bathroom
- Clean sealant with mild products only
- Don’t add new sealant on top of old
- Run the fan after every shower
Give the new sealant its full cure time: follow the cure time we give you.
A failing joint rarely gets better on its own. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
Towns and villages near Ditton
Also in Ditton
Honest limits
In fairness, some problems need a different trade:
- Failed tanking or loose tiles behind the sealant
- Plumbing leaks behind walls or under trays
- Sealant in an older building that needs testing for asbestos first
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before booking.
What we seal
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Expansion joints
- Failed movement joints
How the job changes by surface
Leaking trays & enclosures
A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. Both are checked before we reseal.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing stops that, so the sealant grips the two sides only.
Signs you need remedial sealant in Ditton
All sealant wears out eventually. Over the years it shrinks, hardens and gets colonised by mould. Then the only fix is removal and a new bead.
If you can see any of these, it’s time to have the joints looked at:
- Torn expansion joints
- Caulk or the wrong sealant used in a wet area
- A second bead peeling off the first
- Sealant that came away because the surface wasn’t prepared
Managing a site like Ditton Infant School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
What your quote should include
- Whether you can choose the colour
- Who turns up on the day
- How hidden problems are handled
- How the surfaces are prepared before sealing
Remedial sealant in Ditton: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Aylesford station, a joint that keeps failing is best fixed properly while the property is empty. Homes close to St Peter's Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Ditton is about 4 miles north-west of Maidstone, in Kent. Wherever you are in the ME20 postcode area, we can carry out remedial sealant at your property. Across Kent, we cover 922 places, Ditton among them. For nearby work, see our London page (28 miles or so).
Postcode districts we cover here for remedial sealant: ME20. Remedial sealant is available to properties on London Road, Station Road and Scott Close and the roads around them. We also cover the places around Ditton: Aylesford (1 mile east), East Malling (1 mile west), Well Street (1 mile south-west), Allington (2 miles east) and West Malling (2 miles west). Within a short drive, we also cover Maidstone (4 miles south-east), Sittingbourne (13 miles east), Dartford (14 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north).
Around Ditton
In Ditton, that means homes and buildings near Aylesford School, The Malling School and Kentish Quarryman pub and the streets around them. Ditton’s nearest station is Aylesford station, roughly 0.6 miles north-east. Well-known places in the area include Leybourne Castle (1.6 miles north-west) and Fremlin Walk (3.1 miles south-east). Not far away are Burham Down and Blue Bell Hill.