Surrey · England
Remedial sealant & repairs in Crowhurst, Surrey
We cover Crowhurst for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Sealant that came away because the surface wasn’t prepared
- Smears and lumps from a botched reseal
- Floor or wall movement joints that have failed
Surface by surface
Leaking trays & enclosures
A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. We check both before any new sealant goes on.
Movement & expansion joints
A movement joint must be able to stretch. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed.
Remedial sealant in Crowhurst, done properly
Two decades of sealant work means we recognise most failures quickly. We’re ARBOMaster approved and fully insured, and remedial work carries our 12-month guarantee. If you have mould trapped under a layer of silicone and decorators’ caulk around a bath or shower, we can put it right.
For a small place like Crowhurst, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Every job comes with a 12-month guarantee, wherever you are in Surrey.
- Where
- Crowhurst (RH7)
- Wider area
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
FAQs for Crowhurst
Will you come out to Crowhurst?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Godstone station. Can you help?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is normally more efficient.
How long should I leave it?
It depends on the product and the temperature. Before we leave, we’ll tell you the cure time.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can you strip sealant from an acrylic tray safely?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.
Do I have to be there?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
What information do you need?
Tell us what needs doing and where, with pictures by email if possible. We’ll ask anything else we need to know.
Why deal with it now?
Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours for a typical bath or shower, longer where several layers have been applied. It’s far less disruption than resealing the same joint again and again. Older cottages and farmhouses around Crowhurst can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
Why us?
- Domestic, commercial and hotel work
- Quality sealants from Arbo and Everbuild
- White, clear, grey or coloured to suit, where the product allows
- An ARBOMaster approved applicator
Read how sealant jobs are priced or our reviews.
Remedial sealant in Crowhurst: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Letting a property close to Godstone station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Crowhurst is about 6 miles north of East Grinstead, in Surrey. We carry out remedial sealant for householders, landlords and businesses in Crowhurst and nearby. Across Surrey, we cover 395 places, and Crowhurst is one of them. For nearby work, see our Crawley page, about 10 miles away.
Every address in RH7 is within our area for remedial sealant, from the main roads to the quietest streets. Neighbouring places we cover for remedial sealant include Crowhurst Lane End (1 mile north-west), Merle Common (1 mile north-east), South Godstone (2 miles north-west), Troy Town (2 miles east) and Tandridge (2 miles north-west). We also work in nearby towns such as Epsom (14 miles north-west), Horley (7 miles west), Redhill (7 miles west), Ewell (15 miles north-west), Reigate (8 miles west) and Caterham (6 miles north-west).
Local landmarks in Crowhurst
The nearest railway station is Godstone station, roughly 1.9 miles west of the centre. Other landmarks nearby include Haxted Watermill Museum (2.1 miles south-east) and Bletchingley Castle (4.7 miles north-west). For a walk, there’s Hedgecourt Lake and Botley Hill.
The process
We keep the work tidy and contained to the area we’re working on, so you can carry on as normal. The job normally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Crowhurst needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Tell us if parking is tricky
- Tell us about any water getting in
- Keep pets and children clear of the area while we work
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, ring 0345 464 0079 or send us an email.
Related advice
Common problems we fix in Crowhurst
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, and tears at the first real movement. Backing rod or bond-breaker tape prevents it.
Look out for any of the following:
- A shower that leaks however often it’s resealed
- Products that weren’t meant for the joint
- Floor or wall movement joints that have failed
- Thick, messy sealant smeared over tiles
For an older house near a landmark such as Church of St George, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- Which colour the sealant will be
- How hidden problems are handled
- Are they insured?
- Who turns up on the day
Can I do it myself?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
What we can’t put right
It helps to know what we cannot do too:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Plumbing leaks behind walls or under trays
- Movement from fittings that aren’t supported
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Shrunken worktop sealant
- Botched or over-sealed joints
- Failed movement joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Expansion joints
Landlords, agents and businesses in Crowhurst
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.