Kent · England

Crockhurst Street Remedial Sealant

Our applicators work in Crockhurst Street on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a 12-month guarantee.

  • Smears and lumps from a botched reseal
  • Leaks that keep coming back after resealing
  • Decorators’ caulk around a bath or shower

Trusted remedial sealant in Crockhurst Street

Remedial sealant for homes and businesses in Crockhurst Street

Two decades of sealant work means we recognise most failures quickly. We are ARBOMaster approved and fully insured, and remedial work carries our one-year guarantee. Typical jobs include products that weren’t meant for the joint and smears and lumps from a botched reseal, on expansion joints, mouldy bath & shower sealant and failed movement joints.

For a small place like Crockhurst Street, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.

The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or send us an email.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Where
Crockhurst Street (TN11)
Region
Kent
Cover
One year on every job
Quote
A clear price before we start
Call
0345 464 0079
Updated
26 October 2026

Leave it or put it right?

Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. Dealing with the joint now is a small job by comparison. Older cottages and farmhouses around Crockhurst Street can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.

What you get with us

  • Approved under the ARBOMaster scheme
  • Any old sealant cut out fully, not covered over
  • Tidy, careful work
  • Trusted Arbo and Everbuild sealants

See what affects the cost and our reviews.

What remedial sealant looks like in Crockhurst Street

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

In the older streets around Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first. Schools such as Capel Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Crockhurst Street is about 2 miles south-east of Tonbridge, in Kent. Wherever you are in the TN11 postcode area, our applicators can take on remedial sealant. Crockhurst Street is one of 922 places in Kent where we work. For nearby work, see our Crawley page.

We cover every part of the TN11 postcode area for remedial sealant and the streets around it. If you’re just outside Crockhurst Street, we cover Tudeley (1 mile north-west), Tudeley Hale (1 mile north), Capel (1 mile east), Five Oak Green (1 mile east) and Colt's Hill (2 miles east). Larger places within reach include Maidstone (11 miles north-east), Sevenoaks (9 miles north-west), Royal Tunbridge Wells (4 miles south-west), Kings Hill (7 miles north-east), Foley Park (11 miles north-east) and Paddock Wood (3 miles east).

Around Crockhurst Street

Locally, jobs take us to homes and businesses close to The George And Dragon Public House, Hillview School for Girls and The Schools at Somerhill and the streets around them. The closest station to Crockhurst Street is Tonbridge station, about 2.5 miles west. Other landmarks nearby include Tonbridge Castle (2.5 miles north-west) and Tonbridge Cottage Hospital (2.2 miles west). Green spaces nearby include Tudeley Woods RSPB reserve and Barden Lake.

Map of Crockhurst Street © OpenStreetMap contributors

Looking after it afterwards

How long the joints last depends on use and care. Here’s what we suggest:

  • Deal with small splits early
  • Use a soft cloth, not a scourer, on silicone
  • Keep an eye on the ceiling below the bathroom
  • Keep the room well ventilated

Keep the room ventilated: run the fan during and after showers, or open a window.

Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.

Signs you need remedial sealant in Crockhurst Street

Joints that move need sealant that can stretch. Flexing baths, rocking trays and building movement joints split any bead that’s too stiff or too thin.

Common reasons people contact us include:

  • Smears and lumps from a botched reseal
  • Over-sealed joints coming away
  • Sealant peeling off a dusty or damp surface
  • Repeat leaks from the same joint

If you let a flat or house near Tonbridge station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Before you book anyone

  • Whether you can choose the colour
  • How the joint is cleaned and prepared
  • What insurance they hold
  • How long the guarantee is

How to choose a mastic man

Honest limits

Some problems need a builder, plumber or other trade rather than us:

  • Cracks in the fitting rather than the joint
  • Failed tanking or loose tiles behind the sealant
  • Plumbing leaks behind walls or under trays

If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before booking.

What we seal

  • Failed movement joints
  • Leaking tray & enclosure joints
  • Botched or over-sealed joints
  • Expansion joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant

What we do, step by step

Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Crockhurst Street, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We protect the surfaces around the joint.
  2. The botched or failed sealant is cut away completely.
  3. The joint is degreased and checked for movement and leaks.
  4. Once dry, a suitable sealant is applied and tooled.
  5. We give you the cure time and explain what caused the failure.

Before we arrive

  • Mention any tricky access
  • Mention any leaks or damp you’ve noticed
  • Try not to wet indoor joints just before the visit

Getting a quote

It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, call 0345 464 0079 or send us an email.

Get a quick quote

Related advice

Landlords, agents and businesses in Crockhurst Street

Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.

Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.

Your questions about remedial sealant in Crockhurst Street

I let a flat near Tonbridge station. Can you help?

Yes, we work for landlords and letting agents. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.

Will you come out to Crockhurst Street?

Yes. Crockhurst Street is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

How long should I leave it?

That depends on the sealant used, so please follow the time we give you when we finish.

Do you work for hotels and businesses?

Yes. Hotels, offices and other businesses use us, and we are fully insured.

Is there any odour?

There can be a smell while the sealant cures. Opening a window helps.

Does someone need to be in?

Access is agreed with you when the job is booked. Indoors, that usually means someone at home.

What sealant do you use?

Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we’re using and why.

Do you remove the old sealant?

Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.

What affects the cost of remedial sealant

We quote each job individually. These are the things that affect it:

  • The number of rooms or windows
  • Working hours on commercial sites
  • Access and height
  • The size of the job

What it costs depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before any work starts, so you know where you stand.

What to tell us for a quote

Before you ask for a quote, have a think about:

  • How many joints, rooms or windows are involved
  • Where the property is
  • Whether it has been sealed before
  • The type of property

We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or send us an email and describe the job and send photos if you have them.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job