Aberdeenshire · Scotland
Remedial Sealant in Crathes
Remedial sealant for Crathes and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Worktop sealant that has shrunk and split
- Repeat leaks from the same joint
- Decorators’ caulk around a bath or shower
Common questions in Crathes
Is there a guarantee on remedial sealant in Crathes?
Every job comes with our one-year guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Will you come out to Crathes?
Yes, Crathes is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
How long will it take to strip and reseal the joint?
It takes a few hours for most joints, depending on how much old sealant has to come out. We’ll give you a timescale when we quote.
Is there any odour?
Some sealants have a smell while they cure. Ventilation helps.
Can you take off two layers of silicone?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. Then email us at info@mrmastic.co.uk.
Can tenants book the work?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting agents, businesses and hotels in Crathes.
Remedial sealant for homes and businesses in Crathes
Getting old sealant out properly is slow, careful work. Every layer is cut out, the residue cleaned off and the joint degreased, taking care not to scratch the surfaces around it. New sealant only bonds to a clean, dry joint. If you have thick, messy sealant smeared over tiles and torn expansion joints, we can put it right, on failed movement joints, leaking tray & enclosure joints and shrunken worktop sealant alike.
In and around a place like Crathes, homes range from older stone-built properties to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.
Big or small, it’s backed by our 12-month guarantee in Crathes and across Aberdeenshire.
- Location
- Crathes (AB31)
- Region
- Aberdeenshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Why act early in Crathes
Repeat failures have a cause. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Around Crathes, water from a failed joint in an older stone home can soak into timber and plaster.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in Crathes
- Full insurance on every job
- Old sealant always removed completely
- Neat joints and a tidy finish
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced or customer reviews.
Bathrooms and kitchens in Crathes
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Around Crathes, as everywhere, remedial sealant is only as good as the preparation behind it.
Crathes is about 13 miles south-west of Aberdeen, in Aberdeenshire. Anywhere in AB31, we can carry out remedial sealant at your property. Across Aberdeenshire, we cover 161 places, Crathes among them. We also work in Aberdeen, about 13 miles from Crathes.
Work in AB31 works the same way as everywhere else we cover. Remedial sealant is available to properties on Hollybush Lane and Green Banks. If you’re just outside Crathes, we cover Crossroads (1 mile south), Kirkton of Durris (1 mile east), Balfour (2 miles east), Woodlands (2 miles east) and Banchory (3 miles west). Larger places within reach include Westhill (8 miles north-east), Stonehaven (9 miles south-east), Kemnay (12 miles north), Kintore (12 miles north), Aboyne (14 miles west) and Newtonhill (10 miles east).
Landmarks near Crathes
Nearby you will also find Crathes Castle (1 mile west) and Crathes Castle (1 mile west). Green spaces nearby include Scolty Hill.
How we quote for remedial sealant
For a quick quote, just ask. What matters most is:
- Which sealant suits the joint
- Whether the work is at height
- The amount of work
- How many rooms, windows or areas are involved
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.
Helping us quote
To help us quote quickly, let us know:
- Any access issues, like height or stairs
- Whether it has been sealed before
- What’s wrong with the joints now
- The rough size of the job
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
The process
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours, depending on how many layers have to come out. Outdoor work around Crathes depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
How to look after the new joints
How long the joints last depends on use and care. We suggest:
- Keep movement joints clear of mortar and paint
- Keep an eye on the ceiling below the bathroom
- Find out why the sealant failed first
- Run the fan after every shower
Leave the new joint to cure fully before it gets wet or moves: follow the cure time we give you.
Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.
Also near Crathes
Also in Crathes
What the job involves on each surface
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We take care not to make it worse, and tell you about any damage we find.
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Common problems we fix in Crathes
Silicone only bonds to surfaces that are clean and dry. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.
These are the problems we’re asked about most:
- Wide, uneven beads that look worse than the old ones
- Beads that never stuck properly
- Mould trapped under a layer of silicone
- Decorators’ caulk around a bath or shower
For jobs in and around Crathes, choosing the right material for each joint is as important as a tidy finish.
Before booking anyone
- What product goes in the joint
- Are they insured?
- How the colour is chosen
- How the surfaces are prepared before sealing