Glasgow · Scotland

Corkerhill Remedial Sealant

Failed sealant joints in Corkerhill need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Leaks that keep coming back after resealing
  • Caulk or the wrong sealant used in a wet area
  • Sealant applied over old sealant that has lifted

Remedial sealant in Corkerhill

About our remedial sealant in Corkerhill

Getting old sealant out properly is slow, careful work. Every layer is cut out, the residue cleaned off and the joint degreased, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. We work on botched or over-sealed joints, leaking tray & enclosure joints and shrunken worktop sealant, and the jobs we see most are floor or wall movement joints that have failed and a shower that leaks however often it’s resealed.

Corkerhill is in one of Scotland’s four big cities, where many tenement bathrooms were fitted into rooms that weren’t built for them. Space is tight and ventilation can be poor, which is hard on sealant and grout.

Big or small, you get the same 12-month guarantee.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Where
Corkerhill (G52, G53)
Region
Glasgow
Cover
A year, on every job
Price
A clear price before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What affects the quote in Corkerhill

For a quick quote, just ask. What matters most is:

  • How much old sealant there is and how hard it is to remove
  • How many areas need sealing
  • Whether there’s mould to deal with
  • The number and length of the joints

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.

Asking for a quote

There’s no need for technical detail. Just tell us:

  • The problem you’ve noticed
  • The address or postcode of the job
  • Whether it’s a home or a business
  • How we’d reach the joints

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.

Why deal with it now?

A joint that has failed twice will fail again unless the cause is dealt with. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. In a tenement flat in Corkerhill, a failed seal is rarely just your problem: water can reach the flat below, and gaps in shared walls or fire-stopping affect the whole stair.

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will explain what it covers.

Why us?

  • White, clear, grey or coloured to suit, where the product allows
  • Every job guaranteed for a year
  • Sealant colour chosen to suit
  • Colour agreed with you before we start

Take a look at how sealant jobs are priced or customer reviews.

Aftercare tips

No joint lasts for ever, but care makes a real difference. A few tips:

  • Never fill a movement joint with mortar or grout
  • Ask why a joint failed before redoing it
  • Use a soft cloth, not a scourer, on silicone
  • Don’t wait for a small gap to become a leak

If we have found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant can’t hold back a problem underneath.

Don’t keep resealing the same joint. Get the cause found first, otherwise the next attempt will fail too.

What the job involves on each surface

Over-sealed & botched joints

Botched joints sometimes have damaged edges from earlier scraping. We work carefully to avoid adding to it, and tell you about any damage we find.

Mouldy bath & shower sealant

Where mould keeps coming back, ventilation is generally part of the cause. Along with resealing, we will mention if the room needs better ventilation.

DIY sealant or a professional job?

The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.

Questions from Corkerhill

I’m in a tenement in Corkerhill. Could worn sealant affect the flat downstairs?

Yes, it can. In a tenement, water that gets past failed sealant or cracked grout can run under the bath or tray and through to the ceiling below, and then the repair involves your neighbours too. It’s worth sorting sealant and grout before it gets that far.

Can you help a landlord with a rental near Corkerhill station?

Yes, landlords and agents are among the people we work for. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.

How do I get a quote for remedial sealant in Corkerhill?

We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.

How long does the work take?

Allow a few hours, depending on how many layers have to come out. We’ll give you a timescale when we quote.

Is it worth trying it myself?

It depends on the job. High-level, external movement and fire-rated joints are professional jobs.

Are you ARBOMaster approved?

Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.

Can you take off two layers of silicone?

Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.

My shower still leaks after a reseal. Can you sort it?

Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.

Corkerhill homes and their sealant

In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Sandstone tenements are a big part of Glasgow’s housing, so many bathrooms sit right above a neighbour’s ceiling.

In the older streets around St James' (Pollok) Parish Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Rented homes near Corkerhill station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Corkerhill is about 3 miles south-west of Glasgow, in Glasgow. Corkerhill gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Our Glasgow coverage runs to 183 places, Corkerhill among them.

Here we cover the G52 and G53 postcode area for remedial sealant. Local streets include Alcaig Road, Langton Road and Hapland Road, and we cover them all. Corkerhill is on the M77, which makes it straightforward to reach with everything needed for remedial sealant. If you are just outside Corkerhill, we cover Nethercraigs (1 mile north-west), Mosspark (1 mile north-east), Halfway (1 mile north), Cowglen (1 mile south) and Pollok (1 mile south-west). Larger places within reach include Glasgow (3 miles north-east), Hillhead (3 miles north-east), Dowanhill (3 miles north-east), Woodlands (3 miles north-east), Woodside (4 miles north-east) and North Kelvinside (4 miles north-east).

Around Corkerhill

Locally, jobs take us to homes and businesses close to Bellahouston Park and Craigton Primary School. Corkerhill has its own railway station: Corkerhill station. Nearby you’ll also find Silverburn Shopping Centre (0.9 miles south) and Haggs Castle (1.5 miles east).

Map of Corkerhill © OpenStreetMap contributors

How it works

When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on how many layers have to come out. In a city area like Corkerhill, parking may be by permit or pay-and-display, so tell us what’s nearby. If you are in a flat, let us know how we get in at the street door.

  1. First we work out whether the problem is the sealant, movement or a leak.
  2. Old beads and residue are removed down to clean surfaces.
  3. Mould is treated and the joint dried.
  4. We reseal with a product suited to the joint, backed where needed.
  5. The joint is tooled and you are told about anything else we found.

Getting ready for the visit

  • Let us know about earlier repairs to the joints
  • Mention any parking rules near the property
  • Keep pets and children clear of the area while we work

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, drop us a line at info@mrmastic.co.uk.

Ask for a quote

Related advice

When to call us in Corkerhill

Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. Each fails in its own way.

Most people get in touch when they notice one of these:

  • A second bead peeling off the first
  • Dark patches showing through the sealant
  • Kitchen joints letting water behind the worktop
  • Smears and lumps from a botched reseal

If you look after a building such as St. Paul's High School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

What your quote should include

  • What happens if the job turns out different
  • How much experience the applicator has
  • How long to leave it before use
  • Whether they’re fully insured

10 questions to ask before booking

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job