West Sussex · England
Remedial sealant & repairs in Coates, West Sussex
Specialist remedial sealant for Coates: careful preparation, the right product and tidy work. Call for a quick quote.
- Dark patches showing through the sealant
- A second bead peeling off the first
- A shower that leaks however often it’s resealed
Surface by surface
Leaking trays & enclosures
A shower that leaks after resealing often has a tray that moves or an enclosure sealed on the wrong side. We check both before we reseal.
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We take care not to make it worse, and point out any existing damage.
Remedial sealant in Coates
A joint that keeps letting you down needs more than another bead. Send pictures when you ring 0345 464 0079 or send us an email. If you have mould trapped under a layer of silicone and thick, messy sealant smeared over tiles, we can put it right, on mouldy bath & shower sealant, failed movement joints and leaking tray & enclosure joints alike.
Homes around Coates are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
You are covered for a year from the day we finish. If anything isn’t right with it, ring 0345 464 0079 or send us an email.
- Where
- Coates (RH20)
- Region
- West Sussex
- Cover
- A year, on every job
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Coates questions
Can you help a landlord with a rental near Pulborough station?
Yes. We work for landlords and letting agents as well as homeowners. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Is Coates within the area you cover?
Yes, Coates is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you match the sealant colour?
Yes. Sealants come in white, clear, grey and other colours, and we agree the colour with you before any work starts.
Where do you work from?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Will there be a smell?
Some sealants have a smell while they cure. Opening a window helps.
What should I tell you?
A short description and the location, plus pictures if you have them. If we need more, we’ll ask.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Someone sealed over the old bead. Can you fix it?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
What happens on the day
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes a few hours, depending on how many layers have to come out for a typical job. Somewhere like Coates needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- The new joint is tooled neatly and we explain anything else we found.
How to prepare
- Tell us if parking is tricky
- Tell us about any previous sealing or DIY attempts
- Let us know if you’ve seen damp or leaks
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or email us and describe the job, and pictures are welcome.
Advice
Nearby places to Coates
Also in Coates
Signs you need remedial sealant in Coates
Some joints fail because water is reaching them from behind. A leaking valve, a failed waste or cracked grout feeds water behind the bead, so the silicone goes mouldy or lets go.
The most common problems we see are:
- Gaps opening along the back of the worktop
- Wide, uneven beads that look worse than the old ones
- A shower that leaks however often it’s resealed
- Sealant peeling off a dusty or damp surface
If you look after a building such as Fittleworth CofE Village School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before you book anyone
- Are they insured?
- Who does the work, and how experienced they are
- How the surfaces are prepared before sealing
- How long the guarantee is
Leave it or put it right?
Remedial work takes longer than a straight reseal, but rarely a lot: the work takes a few hours, depending on how many layers have to come out. It’s far less disruption than resealing the same joint again and again. In a small place like Coates, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why book with us
- We never seal over old sealant
- White, clear, grey or coloured to suit, where the product allows
- Colour picked to suit the job
- An ARBOMaster approved applicator
Read our cost guide and our reviews.
Aftercare tips
To keep the joints looking good and working properly:
- Keep the room well ventilated
- Check ceilings under showers for marks
- Report a tray that rocks or a worktop that lifts
- Do not point over movement joints
Where we have pointed out another fault, have it put right, or the new joint may fail again.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.
How we quote for remedial sealant
Jobs vary more than people expect. The main factors:
- The amount of work
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- How easy the joints are to reach
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
What we need to know
When you contact us, it’s useful to know:
- Any access issues, like height or stairs
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- Where the job is, and your postcode
Getting a quote is simple: let us know what needs doing and where. Photos by email help us understand the job, and we’ll come back to you with a quote.
Remedial sealant in Coates: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Church of St Agatha include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Letting a property close to Pulborough station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Coates is about 10 miles north of Littlehampton, in West Sussex. Whether you’re in the middle of Coates or further out, remedial sealant is available for homes and businesses alike. Across West Sussex, we cover 371 places, and Coates is one of them. We also work in Crawley, about 20 miles from Coates.
Work in RH20 is quoted and booked the same way as anywhere else. Close by, we work in Lower Horncroft (1 mile east), Fittleworth (1 mile north-east), Bedham (1 mile north-east), Watersfield (2 miles south-east) and Coldwaltham (2 miles south-east). Within a short drive, we also cover Horsham (14 miles north-east), Worthing (12 miles south-east), Bognor Regis (12 miles south-west), Chichester (12 miles south-west), Littlehampton (10 miles south) and Lancing (14 miles south-east).
Local landmarks in Coates
In Coates, that means homes and buildings near The Swan Hotel, among other places. The nearest railway station is Pulborough station, about 2.7 miles east. Well-known places in the area include Coates Castle (0.5 miles south-west) and Coultershaw Heritage Site (2 miles north-west). The countryside around Coates includes Bignor Hill and Amberley Wild Brooks.