Perth and Kinross · Scotland
Caputh Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for householders, landlords and businesses in Caputh. Fully insured, ARBOMaster approved and guaranteed for a year.
- Sealant peeling off a dusty or damp surface
- Caulk or the wrong sealant used in a wet area
- Gaps opening along the back of the worktop
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Run the fan after every shower
- Clean sealant with mild products only
- Ask why a joint failed before redoing it
- Don’t point over movement joints
Clean gently: a mild cleaner and a soft cloth, with no blades or scourers.
Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into whatever is behind or below. Sorting it early limits the damage.
Remedial sealant in Caputh
A joint that keeps letting you down needs more than another bead. It helps to have pictures when you drop us a line at info@mrmastic.co.uk, along with when it was last resealed. If you have caulk or the wrong sealant used in a wet area and mould trapped under a layer of silicone, we can put it right, whatever the surface.
A bathroom in a place like Caputh gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Caputh (PH1)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we do, step by step
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a typical bath or shower, longer where several layers have been applied. For a place like Caputh, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Move anything stored near the joints
- On commercial sites, let us know about site rules
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Advice
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Towns and villages near Caputh
More services for Caputh
Quotes for remedial sealant in Caputh
Jobs vary more than people expect. What affects the quote:
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
- Whether there’s mould to deal with
- Working hours on commercial sites
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Asking for a quote
To help us quote quickly, let us know:
- Whether it’s a home or a business
- How we’d reach the joints
- A few pictures by email, if you can
- What the problem is, such as mould, gaps, leaks or cracking
To get a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Do you need remedial sealant in Caputh?
Joint depth matters. A bead bonded on three sides, or laid too thick, can’t flex, so it tears when the joint moves. Backing sets the depth and stops that.
Most people get in touch after spotting something like this:
- A second bead peeling off the first
- Floor or wall movement joints that have failed
- Decorators’ caulk around a bath or shower
- Black mould underneath the bead
For landlords with property near Dunkeld & Birnam station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Before booking anyone
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
- Which sealant they’ll use, and why
- When the joint can take water or movement
Why deal with it now?
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and any film left behind stops new sealant sticking. Careful stripping is where most of our time goes. In a place like Caputh, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
Why book with us
- More than 20 years in sealant work
- ARBOMaster approved applicator
- Fully insured
- Sanitary silicone with an anti-fungal additive in wet areas
Read how sealant jobs are priced and our reviews.
For landlords and businesses
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.
Caputh questions
Is Caputh in your area for remedial sealant?
Yes. We work across all of Scotland, and Caputh is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing.
Is Caputh within the area you cover?
Yes. Caputh is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you fix expansion and movement joints?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, and reseal with a flexible product.
Can you remove sealant that’s been put over old sealant?
Yes. Stripping layered sealant takes longer than a normal reseal, but it’s the only way the new joint will last.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. Indoors, that usually means someone at home.
Can tenants book the work?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Remedial sealant around Caputh
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
If you live in an older home near Caputh Parish Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Caputh is about 7 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Whether you are in the middle of Caputh or further out, we cover remedial sealant for every kind of property. 107 places in Perth and Kinross are on our list. You can also see our page for Dundee, roughly 20 miles from Caputh.
Postcode districts we cover here for remedial sealant: PH1. If you’re just outside Caputh, we cover Middleton (1 mile west), Gellyburn (1 mile south-east), Murthly (1 mile south-east), Spittalfield (1 mile north-east) and Bankfoot (3 miles south). Within a short drive, we also cover Perth (10 miles south), Blairgowrie and Rattray (7 miles north-east), Letham (10 miles south), Scone (9 miles south), Pitlochry (14 miles north-west) and Tulloch (9 miles south).
Near you in Caputh
The nearest railway station is Dunkeld & Birnam station, about 3.6 miles west of the centre. A little further out are Murthly Castle (1 mile west). For a walk, there’s Lily Loch and Birnam Hill.