Hampshire · England
Remedial sealant & repairs in Canada, Hampshire
Remedial sealant for Canada, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Wide, uneven beads that look worse than the old ones
- Sealant that came away because the surface wasn’t prepared
- A shower that leaks however often it’s resealed
Remedial sealant in Canada, done properly
Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all need stripping out. We work on botched or over-sealed joints, expansion joints and leaking tray & enclosure joints, and common reasons people get in touch are sealant applied over old sealant that has lifted and sealant peeling off a dusty or damp surface.
For a small place like Canada, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Every job is covered by our 12-month guarantee.
- Where
- Canada (SO51)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
FAQs for Canada
Can you do remedial sealant in Canada?
Yes. We work across London and the South East, and Canada is part of that. You can phone 0345 464 0079 or email us and tell us what needs doing, and we will give you a clear quote.
Will you come out to Canada?
Yes, Canada is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you offer different sealant colours?
We will suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
Can you fix a reseal that hasn’t worked?
Yes. Repeat leaks usually come from over-sealing, movement or water getting in elsewhere, so we find that first.
Are you fully insured?
Yes. We’re fully insured, and we can confirm the details when we quote.
How long does the work take?
That depends on how many layers there are and how many joints. We’ll tell you before we start.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all.
What happens on the day
We bring everything the job needs with us. After a quick look at the joints together, we protect the area and start. Most jobs take a few hours, depending on how many layers have to come out. In a small place like Canada, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- We use the right backing and sealant for any joint that moves.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Clear the area around the work
- Let us know if you’ve seen damp or leaks
- Mention any sign-in or site rules at work premises
How to get a quote
For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Related advice
What affects the quote in Canada
We quote each job individually. These are the things that affect it:
- Access and height
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Helping us quote
Before you ask for a quote, have a think about:
- The type of property
- How we’d reach the joints
- Pictures of the joints, sent by email
- Where the job is, and your postcode
We quote each job on its own. Simply phone 0345 464 0079 or email us and describe the job, and pictures are welcome.
Why act early in Canada
A joint that has failed twice will fail again unless the cause is dealt with. Finding it, whether movement, water from elsewhere or an unsuitable product, ends the cycle. Around Canada, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Approved under the ARBOMaster scheme
- A 12-month guarantee on all work
- Anti-fungal silicone where joints get wet
- Experience in homes, commercial sites and hotels
Read how sealant jobs are priced or our reviews.
What the job involves on each surface
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. We strip it, degrease the joint and reseal colour-matched to the worktop.
Signs you need remedial sealant in Canada
Joints that move need sealant that can stretch. Flexing baths, rocking trays and building movement joints split any bead that’s too stiff or too thin.
It’s worth asking for a quote if you see:
- Beads that never stuck properly
- Wide, uneven beads that look worse than the old ones
- Products that weren’t meant for the joint
- Torn expansion joints
Rented homes near Romsey station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants.
What your quote should include
- How the surfaces are prepared before sealing
- How much experience the applicator has
- Whether they’re fully insured
- What the cure time is
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Towns and villages near Canada
What else we do in Canada
Canada homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Schools such as Wellow School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Canada is about 5 miles north-west of Totton, in Hampshire. If you need remedial sealant in Canada, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We cover Hampshire from our Crawley base. We cover 683 towns and villages across Hampshire. Southampton is on our list too, around 9 miles away.
Postcode districts we cover here for remedial sealant: SO51. We also cover the places around Canada: West Wellow (1 mile north), Blackhill (1 mile east), East Wellow (1 mile east), Newbridge (2 miles south) and Plaitford Green (2 miles north). Within a short drive, we also cover Winchester (14 miles north-east), Eastleigh (11 miles east), Totton (5 miles south-east), Chandler's Ford (9 miles east), Hedge End (13 miles east) and Lymington (14 miles south).
Near you in Canada
Locally, jobs take us to homes and businesses close to Rockingham Arms. The closest station to Canada is Romsey station, about 4.6 miles north-east of the centre. Nearby you’ll also find Tatchbury Mount Hospital (3.5 miles south-east). Open spaces near Canada include Copythorne Common.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
For anyone letting property in or around Canada, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.