West Sussex · England

Broomer's Corner Remedial Sealant

Remedial sealant in Broomer's Corner from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Caulk or the wrong sealant used in a wet area
  • Worktop sealant that has shrunk and split
  • Smears and lumps from a botched reseal

Remedial sealant in Broomer's Corner

Remedial sealant for homes and businesses in Broomer's Corner

A joint that keeps failing usually has a reason. Movement, the wrong product or a leak from somewhere else will beat any new bead. Finding that cause comes before any new sealant. Typical jobs include dark patches showing through the sealant and floor or wall movement joints that have failed, on shrunken worktop sealant, failed movement joints and botched or over-sealed joints.

In a village or hamlet like Broomer's Corner, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.

All of our work is guaranteed for twelve months, in Broomer's Corner and everywhere else we cover.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Where
Broomer's Corner (RH13)
Wider area
West Sussex
Cover
12 months on all our work
Quotes
A clear price before any work starts
Phone
0345 464 0079
Page updated
26 October 2026

Remedial sealant in Broomer's Corner: local notes

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Managing a site like William Penn School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Billingshurst station, a joint that keeps failing is best fixed properly while the property is empty.

Broomer's Corner is about 7 miles south-west of Horsham, in West Sussex. For remedial sealant in and around Broomer's Corner, please call 0345 464 0079 or drop us an email for a quick quote. We are based in Crawley and cover West Sussex. Across West Sussex, we cover 371 places, Broomer's Corner among them. Our Crawley page covers work nearby, about 13 miles away.

Work in RH13 works the same way as everywhere else we cover. We cover properties on Saucelands Lane, Sincox Lane and Hooklands Lane. We also cover Whitehall (1 mile east), Shipley (1 mile north-east), Dragons Green (2 miles north-east), Dial Post (2 miles south-east) and Ashington (3 miles south). Further out, we also cover Crawley (13 miles north-east), Horsham (7 miles north-east), Worthing (11 miles south), Haywards Heath (13 miles east), Burgess Hill (12 miles east) and Littlehampton (13 miles south-west).

Around Broomer's Corner

Broomer's Corner’s nearest station is Billingshurst station, roughly 3.4 miles north-west of the centre. Green spaces nearby include Knepp Wildland.

Map of Broomer's Corner © OpenStreetMap contributors

What we can’t put right

It helps to know what we can’t do too:

  • Water damage behind tiles that needs a tiler
  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
  • Movement from fittings that are not supported

If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think.

Where we work in Broomer's Corner

  • Botched or over-sealed joints
  • Failed movement joints
  • Shrunken worktop sealant
  • Mouldy bath & shower sealant
  • Leaking tray & enclosure joints
  • Expansion joints

Questions from Broomer's Corner

Is Broomer's Corner within the area you cover?

Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Do you cover Broomer's Corner for remedial sealant?

Yes. We work across London and the South East, and Broomer's Corner is part of that. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.

Do you take out the old sealant first?

Yes. All of the old material is cut out and the joint cleaned.

Which products do you use?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We’ll tell you what we are using and why.

How long does remedial resealing take?

A little longer than a standard reseal. For most joints, it’s a few hours, and we confirm the time with your quote.

Where are you based?

We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.

Can I choose the sealant colour?

In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before work begins.

Someone resealed my shower and it’s leaking again. Can you help?

Yes. We will take all the sealant out, look for why it failed and reseal it properly.

How to look after the new joints

Simple care keeps the joints in good condition. Our advice:

  • Deal with small splits early
  • Keep bleach and abrasives off the bead
  • Check trays and worktops do not move
  • Do not add new sealant on top of old

Keep an eye on the joint at first, particularly where the original failure was caused by movement. Should anything change, ring 0345 464 0079 or email us.

Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Any of them means it’s time for remedial work.

DIY versus a professional finish

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.

Surface by surface

Worktops & kitchens

If a worktop moves when you lean on it, the sealant will keep splitting. It needs fixing down first, and we’ll tell you if we find it.

Over-sealed & botched joints

A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, then reseal neatly.

What happens if it’s left?

Adding more sealant is the usual quick fix, and it rarely works. It can’t bond to what’s underneath, so the leak carries on and there’s now more to remove. Where a wall is exposed, as many are in small places like Broomer's Corner, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

What you pay reflects the work, not a rough estimate. That is why we ask about the job first and give you a clear price before we start.

What you get with us

  • Old sealant always removed completely
  • Over 20 years’ experience
  • Homes, businesses and hotels
  • Arbo and Everbuild products

Read what affects the cost or customer reviews.

When to call us in Broomer's Corner

Products get mixed up: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. None of them last.

Any of these means the joints need attention:

  • Dark patches showing through the sealant
  • Over-sealed joints coming away
  • Floor or wall movement joints that have failed
  • Smears and lumps from a botched reseal

If you live in an older home near St Mary's Mission Church, walls and floors in older homes can move, and sealant and grout show it first.

What to look for in a quote

  • How the surfaces are prepared before sealing
  • Is the old sealant removed completely?
  • Whether they’re fully insured
  • Which sealant they’ll use, and why

How to choose a mastic man

How it works

Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a few hours for a typical bath or shower, longer where several layers have been applied. For a village or hamlet like Broomer's Corner, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we find out how and where the joint has failed.
  2. We strip the joint completely, removing any layers below.
  3. We clean the joint, treat any mould and let it dry.
  4. We use the right backing and sealant for any joint that moves.
  5. Finally we finish the joint and talk you through what we found.

Getting ready for the visit

  • Mention any parking rules near the property
  • Mention if the joints have been sealed before
  • Let us know about stairs, lifts or work at height

Ask for a quote

If you’re in Broomer's Corner and need remedial sealant, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and you’ll get a clear quote before work begins.

Get a quick quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job