Kent · England
Remedial sealant & repairs in Brook Street, Kent
Problem with your failed sealant joints in Brook Street? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Sealant peeling off a dusty or damp surface
- Worktop sealant that has shrunk and split
- Movement joints that have split or pulled away
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Air the bathroom so the sealant can dry
- Look for stains below bathrooms now and then
- Never fill a movement joint with mortar or grout
- Have loose fittings fixed before resealing
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
How we handle remedial sealant in Brook Street
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. Out it comes, and in goes a sealant suited to the job. We work on failed movement joints, leaking tray & enclosure joints and shrunken worktop sealant, and the jobs we see most are kitchen joints letting water behind the worktop and thick, messy sealant smeared over tiles.
Around Brook Street, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
All our work comes with a 12-month guarantee, wherever you are in Kent.
- Location
- Brook Street (TN26)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Nearby places to Brook Street
More services for Brook Street
Why act early in Brook Street
Spraying mould remover on a sealed-over joint does not reach what’s underneath. The layers have to come out, and the joint treated and dried before resealing. Around Brook Street, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
Why us?
- Anti-fungal sanitary silicone in wet areas
- Homes, businesses and hotels
- White, clear, grey or coloured to suit, where the product allows
- Neat joints and a tidy finish
Take a look at what affects the cost or what customers say.
Different surfaces, different methods
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out.
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, matched to the frame colour.
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Failed tanking or loose tiles behind the sealant
- Sealant in an older building that needs testing for asbestos first
- Movement from fittings that are not supported
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Where we work in Brook Street
- Expansion joints
- Failed movement joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Landlord and commercial work in Brook Street
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Common questions in Brook Street
I let a flat near Appledore (Kent) station. Can you help?
Yes. We work for landlords and agents as well as householders, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.
Can you do remedial sealant in Brook Street?
Yes. Our work covers London and the South East, and Brook Street is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Can you remove old sealant without damaging the bath?
Yes, with care. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. We point out any damage that’s already there.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
How do I get a quote for remedial sealant in Brook Street?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
What remedial sealant looks like in Brook Street
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near Parish Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first. Managing a site like Woodchurch Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Brook Street is about 7 miles south-west of Ashford, in Kent. Wherever you are in the TN26 postcode area, we cover remedial sealant for homes and businesses. 922 places in Kent are on our list, large and small. We also work in Crawley, about 41 miles from Brook Street.
Here we cover the TN26 postcode area for remedial sealant. Neighbouring places we cover for remedial sealant include Brattle (1 mile east), Woodchurch (1 mile north-east), Shirkoak (2 miles north), Leigh Green (2 miles west) and Reading Street (2 miles south-west). Larger places within reach include Ashford (7 miles north-east), Hythe (14 miles east), Tenterden (3 miles west), Park Wood (15 miles north-west), Kennington (9 miles north-east) and New Romney (10 miles south-east).
Local landmarks in Brook Street
We work in homes and buildings around Stonebridge Inn and the streets around them. For rail, the closest station is Appledore (Kent) station, roughly 3.6 miles south-east. A little further out are Woodchurch Village Life Museum (0.9 miles north). Not far away are Orlestone Forest.
Do you need remedial sealant in Brook Street?
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, cannot stretch, so it tears when the joint moves. Backing rod or bond-breaker tape prevents it.
Look out for these signs:
- Dark patches showing through the sealant
- Products that weren’t meant for the joint
- Torn expansion joints
- Leaks that keep coming back after resealing
For landlords with property near Appledore (Kent) station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Questions to ask before you book
- Whether the sealant suits the joint
- How long to leave it before use
- How long the guarantee is
- How hidden problems are handled
How the visit works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The visit itself usually takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the size of the job. In a small place like Brook Street, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Let us know if you’ve seen damp or leaks
- Tell us if parking is tricky
Getting a quote
Call for a quick quote, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.