Kent · England
Reading Street Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Reading Street and across Kent. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Mould trapped under a layer of silicone
- Gaps opening along the back of the worktop
- Smears and lumps from a botched reseal
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Remedial sealant in Reading Street, done properly
Movement and expansion joints fail when the sealant cannot stretch. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. Typical jobs include beads that never stuck properly and caulk or the wrong sealant used in a wet area, on botched or over-sealed joints, failed movement joints and shrunken worktop sealant.
Around Reading Street, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Where
- Reading Street (TN30)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
For landlords and businesses
If you manage several properties in or around Reading Street, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Housing providers, facilities teams and property managers book us too in Reading Street and across Kent. We can quote a run of properties together, and we are fully insured.
Honest limits
To be straight with you, there are a few things sealant will not fix:
- A bath, tray or worktop that moves until it’s properly fixed
- A cracked shower tray or bath (that needs repair or replacing)
- Sealant in an older building that needs testing for asbestos first
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer before you book.
Surfaces we seal
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
What affects the quote in Reading Street
You will get a clear quote before we start. It takes into account:
- The number and length of the joints
- Any working-time requirements on site
- Mould in or behind the old joints
- Whether the work is at height
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or email us.
What to tell us for a quote
To help us quote quickly, let us know:
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
- Whether it has been sealed before
- How many joints, rooms or windows are involved
If you’re in Reading Street and need remedial sealant, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Signs you need remedial sealant in Reading Street
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks, especially in damp, poorly aired rooms. Then the only fix is removal and a new bead.
These are the problems we are asked about most:
- Thick, messy sealant smeared over tiles
- A second bead peeling off the first
- Caulk or the wrong sealant used in a wet area
- Kitchen joints letting water behind the worktop
For an older house near a landmark such as Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Comparing quotes
- Whether VAT is included
- What guarantee comes with the work
- What preparation is included
- When the joint can take water or movement
Common questions in Reading Street
Is Reading Street within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Appledore (Kent) station?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Do you fix expansion and movement joints?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, then the joint is sealed properly.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area.
Does remedial work come with a guarantee?
Yes, for 12 months. Where we’ve flagged another fault, it needs fixing for the joint to last.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
What if the leak is not the sealant?
We will tell you. A cracked tray, faulty valve or leaking waste needs a different trade, so we won’t pretend it will.
What the job involves on each surface
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, including the smears and film on surrounding tiles. Only a clean joint will take a new bead.
Windows & doors
Frames resealed over the top end up with hard, layered mastic. All of it is cut out and the frame and wall cleaned before backing and resealing.
Bathrooms and kitchens in Reading Street
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For landlords with property near Appledore (Kent) station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Reading Street is about 9 miles south-west of Ashford, in Kent. Wherever you are in the TN30 postcode area, we can carry out remedial sealant at your property. Our area takes in 922 places across Kent, large and small. There’s also a page for Crawley, roughly 41 miles from Reading Street.
We work across TN30 for remedial sealant. Nearby, we also carry out remedial sealant in Stone Corner (1 mile south-west), Acton (2 miles south-west), Appledore Heath (2 miles east), Leigh Green (2 miles north-west) and Stone in Oxney (2 miles south-east). Further out, we also cover Ashford (9 miles north-east), Hythe (15 miles east), Tenterden (3 miles north-west), Kennington (11 miles north-east), New Romney (10 miles south-east) and Staplehurst (12 miles north-west).
Local landmarks in Reading Street
Reading Street’s nearest station is Appledore (Kent) station, about 3.3 miles east of the centre. Well-known places in the area include Smallhythe Place (1.8 miles west). Open spaces near Reading Street include Orlestone Forest.
The process
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the amount of work. For a village or hamlet like Reading Street, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we find out how and where the joint has failed.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
- Let us know about earlier repairs to the joints
Getting a quote
We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or email us and describe the job, and photos are welcome.