Hampshire · England
Remedial Sealant in Brockenhurst
Problem with your failed sealant joints in Brockenhurst? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Movement joints that have split or pulled away
- Kitchen joints letting water behind the worktop
- Repeat leaks from the same joint
Remedial sealant for homes and businesses in Brockenhurst
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, taking care not to scratch the surfaces around it. Only then can new sealant bond. If you are dealing with thick, messy sealant smeared over tiles and sealant applied over old sealant that has lifted, we can put it right, whatever the surface.
Smaller places like Brockenhurst still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
A 12-month guarantee comes as standard.
- Where
- Brockenhurst (SO42)
- Region
- Hampshire
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Bathrooms and kitchens in Brockenhurst
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings. Brockenhurst has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
For an older house near a landmark such as Church of St Saviour, walls and floors in older homes can move, and sealant and grout show it first. If you let a flat or house near Brockenhurst station, botched sealant from a previous quick fix is easier to strip out between tenants.
Brockenhurst is about 5 miles north of Lymington, in Hampshire. Anywhere in SO42, our applicators can take on remedial sealant. Our Hampshire coverage runs to 683 places, and Brockenhurst is one of them. There’s also a page for Southampton, roughly 11 miles from Brockenhurst.
Work in SO42 works the same way as everywhere else we cover. You will find streets such as Fibbards Road, The Rise and Brookley Road, and we cover them all. Neighbouring places we cover for remedial sealant include South Weirs (1 mile south-west), Setley (1 mile south), Balmerlawn (1 mile north-east), Lyndhurst (4 miles north) and Emery Down (4 miles north). Within a short drive, we also cover Eastleigh (14 miles north-east), Totton (8 miles north-east), Chandler's Ford (14 miles north-east), Hedge End (14 miles north-east), Lymington (5 miles south) and Romsey (13 miles north).
Landmarks near Brockenhurst
In Brockenhurst, that means homes and buildings near Morant Arms, among other places. Brockenhurst has its own railway station: Brockenhurst station. Well-known places in the area include Lymington New Forest Hospital (3.8 miles south).
When it is not the sealant
We will not take on work that will not last, so these are the limits:
- Plumbing leaks behind walls or under trays
- Older mastics that may need an asbestos check before removal
- A tray or bath that is cracked
If you are not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Expansion joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Failed movement joints
What we do, step by step
When we arrive, we look over the joints with you first. Surfaces next to the work are protected before any work begins. The work usually takes a few hours for a typical bath or shower, longer where several layers have been applied. A visit to Brockenhurst is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
Getting ready for the visit
- Move anything stored near the joints
- Tell us about any previous sealing or DIY attempts
- Let us know about parking restrictions
Get a quote
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Work for landlords, hotels and businesses
For anyone letting property in or around Brockenhurst, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Housing providers, facilities teams and property managers book us too in Brockenhurst and across Hampshire. Several sites can go on one quote, and we are fully insured.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
FAQs for Brockenhurst
Do you work in hotels near Brockenhurst?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Do you work for landlords with property near Brockenhurst station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or email us.
Do you cover Brockenhurst?
We do. Our applicators work in Brockenhurst.
Do I have to be there?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Is remedial work guaranteed?
Yes, with our 12-month guarantee. Where we have flagged another fault, it needs fixing for the joint to last.
How long will it take to strip and reseal the joint?
Allow a few hours for most joints, depending on how much old sealant has to come out. We’ll give you a timescale when we quote.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Leave it or put it right?
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. Around Brockenhurst, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- We never seal over old sealant
- Anti-fungal sanitary silicone in wet areas
- Over 20 years’ experience
- A 12-month guarantee on all work
What we are called out for in Brockenhurst
Joint depth matters. A bead bonded on three sides, or laid too thick, can’t flex, and tears at the first real movement. Backing rod or bond-breaker tape prevents it.
Common reasons people contact us include:
- Sealant that came away because the surface wasn’t prepared
- Leaks that keep coming back after resealing
- Caulk or the wrong sealant used in a wet area
- Dark patches showing through the sealant
Managing a site like Brockenhurst Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before booking
- What happens if they find a problem under the old sealant
- How the joint is cleaned and prepared
- What the cure time is
- Who does the work, and how experienced they are
Quotes for remedial sealant in Brockenhurst
Your quote is based on your job. We look at:
- Which sealant suits the joint
- The number and length of the joints
- Whether the work is at height
- How much old sealant there is and how hard it is to remove
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- If someone has resealed it before
- Photos by email, if that is easy
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.