Hampshire · England
Brockenhurst Fire Rated Sealant
Fire rated sealant for Brockenhurst, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Open holes round services passing through fire walls
- Damaged fire sealant left by other trades
- Open gaps behind door architraves
The process
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. Parking around Brockenhurst is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Keep pets and children clear of the area while we work
- Mention if the joints have been sealed before
- Mention any parking rules near the property
Ask for a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or email us.
Related advice
About our fire rated sealant in Brockenhurst
We can work through a building room by room or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. If you are dealing with seals cut through by electricians, plumbers or data installers and open holes round services passing through fire walls, we can put it right.
Commercial work around a smaller place like Brockenhurst generally means a pub, a shop, a school or small business units rather than office blocks. The work is the same as in a big building, just on a smaller scale.
All our work comes with our one-year guarantee.
- Location
- Brockenhurst (SO42)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What fire rated sealant looks like in Brockenhurst
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details. Brockenhurst has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you look after a building such as Brockenhurst Church of England Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. For landlords with property near Brockenhurst station, any gap left by new services in shared walls should be closed with a fire-rated product.
Brockenhurst is about 5 miles north of Lymington, in Hampshire. Across the SO42 area, our applicators can take on fire rated sealant. Across Hampshire, we cover 683 places, and Brockenhurst is one of them. For nearby work, see our Southampton page, about 11 miles away.
Postcode districts we cover here for fire rated sealant: SO42. Streets in the area include Fibbards Road, The Rise and Brookley Road. Close by, we work in South Weirs (1 mile south-west), Setley (1 mile south), Balmerlawn (1 mile north-east), Lyndhurst (4 miles north) and Emery Down (4 miles north). Within a short drive, we also cover Eastleigh (14 miles north-east), Totton (8 miles north-east), Chandler's Ford (14 miles north-east), Hedge End (14 miles north-east), Lymington (5 miles south) and Romsey (13 miles north).
Landmarks near Brockenhurst
In Brockenhurst, that means homes and buildings near Morant Arms, among other places. Brockenhurst has its own railway station: Brockenhurst station. A little further out are Lymington New Forest Hospital (3.8 miles south).
Signs you need fire rated sealant in Brockenhurst
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
The most common problems we see are:
- Open joints along the top of partitions
- Sealant items on a fire risk assessment action list
- Old fire sealant that has split or come away
- New service routes left unsealed after building work
If you look after a church, hall or community building such as Church of St Saviour, older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- How much experience the applicator has
- What happens if they find a problem under the old sealant
- When the joint can take water or movement
- How the joint is cleaned and prepared
What we can’t put right
It helps to know what we can’t do too:
- Big openings where sealant alone isn’t the tested solution
- Fire doors that need new seals, closers or hardware
- Sign-off of the building, which sits with building control or your assessor
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Door frames
- Plasterboard & masonry
What affects the quote in Brockenhurst
You will get a clear quote before we start. It takes into account:
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- How much there is to do
- Which sealant suits the joint
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or drop us an email and we will talk you through it.
What we need to know
Photos by email are helpful but not essential. Please mention:
- How we’d reach the joints
- The rough size of the job
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
Why it’s worth doing now in Brockenhurst
Squirting in whichever sealant is nearest doesn’t make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Around Brockenhurst, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
Combining jobs into one visit is normally more efficient than separate visits. We will give you a clear price for the lot.
Why book with us
- Over 20 years’ experience
- Any old sealant cut out fully, not covered over
- An ARBOMaster approved applicator
- Full insurance on every job
Read how sealant jobs are priced and our reviews.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Report cracked or damaged seals as soon as you notice them
- Do not paint over fire sealant until it has cured
- Keep pictures of seals that will be hidden
- Tell trades working in the building that fire seals must be put back
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
FAQs for Brockenhurst
Can you help a landlord with a rental near Brockenhurst station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Do you work in hotels near Brockenhurst?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is the work guaranteed?
Yes. All our work carries a one-year guarantee.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What information do you need?
Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or drop us an email.
Can you tell me how many minutes the seal will last?
We don’t issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first.
Towns and villages near Brockenhurst
Other services in Brockenhurst
For landlords and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.