Isle of Wight · England
Bierley Remedial Sealant
We cover Bierley for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- Sealant applied over old sealant that has lifted
- Smears and lumps from a botched reseal
- Kitchen joints letting water behind the worktop
Remedial sealant for homes and businesses in Bierley
Two decades of sealant work means we recognise most failures quickly. We are ARBOMaster approved and fully insured, and every remedial job comes with a 12-month guarantee. Typical jobs include over-sealed joints coming away and torn expansion joints, on leaking tray & enclosure joints, failed movement joints and botched or over-sealed joints.
For a small place like Bierley, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
You get a 12-month guarantee, the same in Bierley as everywhere else we work.
- Location
- Bierley (PO38)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on all our work
- Quote
- A clear price before we start
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Bathrooms and kitchens in Bierley
Bierley is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Homes close to Church of St. Mary and St. Radegund include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as Niton Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Bierley is about 5 miles south-west of Shanklin, in the Isle of Wight. Our applicators cover remedial sealant for homes and businesses in Bierley and the surrounding area, as part of our work across the Isle of Wight. Bierley is one of 125 places in the Isle of Wight where we work. For nearby work, see our Portsmouth page (17 miles or so).
We cover every part of the PO38 postcode area for remedial sealant and the streets around it. Nearby, we also carry out remedial sealant in Southford (1 mile north-east), Nettlecombe (1 mile east), Godshill (3 miles north), Wroxall (3 miles north-east) and Sandford (3 miles north-east). We also work in nearby towns such as Newport (7 miles north), Ryde (10 miles north-east), Cowes (11 miles north), Sandown (6 miles north-east), Shanklin (5 miles north-east) and Ventnor (3 miles east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Bierley
In Bierley, that means homes and buildings near The White Horse Inn and the streets around them. The closest station to Bierley is Shanklin station, about 5 miles north-east. Other landmarks nearby include Blackgang Sawmill Museum (1.6 miles south-west) and Arthur Webster Memorial Hospital for Children (5 miles north-east). For a walk, there’s Stenbury Down.
Also near Bierley
Other services in Bierley
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Keep an eye on the ceiling below the bathroom
- Report a tray that rocks or a worktop that lifts
- Air the bathroom so the sealant can dry
- Get the cause of a repeat leak found before resealing
Give the new sealant its full cure time: normally around 24 hours, or as long as we advise.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
For anyone letting property in or around Bierley, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Why act early in Bierley
Repeat failures have a cause. Finding it, whether movement, water from elsewhere or an unsuitable product, ends the cycle. Where a wall is exposed, as many are in small places like Bierley, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Call for a quick quote and we will go through it with you.
Why book with us
- Neat joints and a tidy finish
- Domestic, commercial and hotel work
- Rated 4.9 stars on Google
- Arbo and Everbuild products
See our cost guide and customer reviews.
Common problems we fix in Bierley
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks. Then the only fix is removal and a new bead.
Any of these means the joints need attention:
- Floor or wall movement joints that have failed
- Beads that never stuck properly
- Repeat leaks from the same joint
- Dark patches showing through the sealant
Rented homes near Shanklin station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What to look for in a quote
- Which colour the sealant will be
- How hidden problems are handled
- Whether they’re fully insured
- What product goes in the joint
When it isn’t the sealant
It helps to know what we cannot do too:
- Movement from fittings that are not supported
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Expansion joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Failed movement joints
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What happens on the day
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere as small as Bierley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Getting ready for the visit
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
- Let us know if you’ve seen damp or leaks
Get a quote
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll send you a clear quote before any work starts.
Advice
Questions from Bierley
Can you do remedial sealant in Bierley?
Yes, Bierley is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Is Bierley within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How do I get a quote for remedial sealant in Bierley?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or drop us an email with a short description of the job.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
How long before the joint can be used?
It depends on the product and the temperature. Before we leave, we will tell you the cure time.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.