Hampshire · England
Remedial Sealant in Baughurst
Remedial sealant across Baughurst and nearby, with old sealant always removed completely and a 12-month guarantee.
- A shower that leaks however often it’s resealed
- Decorators’ caulk around a bath or shower
- Worktop sealant that has shrunk and split
Remedial sealant in Baughurst, done properly
Movement and expansion joints fail when the sealant cannot stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. If you have sealant applied over old sealant that has lifted and floor or wall movement joints that have failed, we can put it right.
In a village or hamlet like Baughurst, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Baughurst (RG26)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Your questions about remedial sealant in Baughurst
Is Baughurst within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Midgham station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Does someone need to be in?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
What does remedial sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, ring 0345 464 0079 or drop us an email with a short description of the job.
Can you remove old sealant without damaging the bath?
Yes. We take our time over removal, especially on acrylic, enamel and uPVC.
When is the sealant fully cured?
It depends on the product and the temperature. We tell you how long to leave it before we go.
Where are you based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Towns and villages near Baughurst
Other services in Baughurst
Why deal with it now?
Mould under a bead can’t be reached by cleaning. The layers have to come out. Where a wall is exposed, as many are in small places like Baughurst, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
Why book with us
- Fully insured
- ARBOMaster approved applicator
- White, clear, grey or coloured to suit, where the product allows
- Trusted Arbo and Everbuild sealants
Read what affects the cost or what customers say.
How we quote for remedial sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How much there is to do
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- Whether the work is at height
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What we need to know
Before you ask for a quote, have a think about:
- Whether it has been sealed before
- The type of property
- A few photos by email, if you can
- What’s wrong with the joints now
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.
Different surfaces, different methods
Mouldy bath & shower sealant
Mould that has grown into silicone doesn’t clean out for good. All of it comes out, and the joint is treated and dried ahead of a new anti-fungal bead.
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so cleaning takes longer than in a bathroom before resealing.
Bathrooms and kitchens in Baughurst
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Midgham station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. For site and facilities teams at buildings such as The Hurst School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as Saint Mary's Church, walls and floors in older homes can move, and sealant and grout show it first.
Baughurst is about 1 mile west of Tadley, in Hampshire. For remedial sealant in and around Baughurst, please ring 0345 464 0079 or email us for a quick quote. We cover Hampshire from our Crawley base, Baughurst included. Across Hampshire, we cover 683 places, Baughurst among them. There’s also a page for Reading, about 11 miles away.
We work across the RG26 postcode area for remedial sealant. Local streets include Blackthorn Close, Brimpton Road and Wolverton Road, all of which we cover. We also cover Inhurst (1 mile north-west), Heath End (1 mile north), Axmansford (1 mile south-west), Tadley (1 mile east) and Brimpton Common (1 mile north-west). We also work in nearby towns such as Basingstoke (7 miles south-east), Fleet (15 miles east), Yateley (14 miles east), Hook (10 miles south-east), Popley (6 miles south-east) and Kempshott (8 miles south).
Near you in Baughurst
We work in homes and buildings around Wellington Arms Public House and Burnham Copse Primary School, among other places. For rail, the closest station is Midgham station, roughly 3.1 miles north. Well-known places in the area include Park Prewett Hospital (5.4 miles south-east) and Calleva Museum (3 miles east).
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Get the cause of a repeat leak found before resealing
- Report a tray that rocks or a worktop that lifts
- Keep an eye on the ceiling below the bathroom
- Use a soft cloth, not a scourer, on silicone
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Mould under a second layer of sealant keeps growing out of sight. By the time it shows through, the joint is well past saving.
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- A tray or worktop that needs refixing first
- Plumbing leaks behind walls or under trays
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.
Where we work in Baughurst
- Failed movement joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Expansion joints
What we do, step by step
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a typical bath or shower, longer where several layers have been applied, and the area is left clean. Somewhere as small as Baughurst, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Getting ready for the visit
- Clear the area around the work
- On commercial sites, let us know about site rules
- Tell us if parking is tricky
Ask for a quote
Asking for a quote is easy: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will take it from there.