West Sussex · England
Angmering Remedial Sealant
Remedial sealant in Angmering from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Sealant peeling off a dusty or damp surface
- Thick, messy sealant smeared over tiles
- Black mould underneath the bead
Angmering homes and their sealant
Angmering is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Angmering station? Then botched sealant from a previous quick fix is easier to strip out between tenants. For an older house near a landmark such as The Parish Church of St Margaret, walls and floors in older homes can move, and sealant and grout show it first.
Angmering is about 4 miles west of Worthing, in West Sussex. Across the BN16 area, we can carry out remedial sealant at your property. 371 places in West Sussex are on our list, from the larger towns to small villages. For nearby work, see our Brighton page.
Jobs for remedial sealant in BN16 works the same way as everywhere else we cover. We cover properties on High Street, Church Road and Station Road. We also cover Hammerpot (1 mile north), Hangleton (1 mile south-east), East Preston (1 mile south), West Preston (1 mile south-west) and Angmering-on-Sea (2 miles south). Further out, we also cover Worthing (4 miles east), Bognor Regis (9 miles west), Chichester (13 miles west), Selsey (15 miles south-west), Littlehampton (3 miles south-west) and Shoreham-by-Sea (9 miles east).
Around Angmering
Typical jobs here are in homes near The Spotted Cow pub, The Angmering School and Clapham Wood, among other places. The nearest railway station is Angmering station, roughly 0.8 miles south-west. A little further out are Rustington Museum (1.6 miles south-west) and Zachary Merton Hospital (1.6 miles south-west). For a walk, there’s Highdown Hill and WWT Arundel.
About our remedial sealant in Angmering
If a joint has been resealed and is leaking again, it’s worth a proper look. It helps to have photos when you call 0345 464 0079 or drop us an email. Common call-outs are for a shower that leaks however often it’s resealed and caulk or the wrong sealant used in a wet area, on leaking tray & enclosure joints, failed movement joints and botched or over-sealed joints.
In a smaller place like Angmering, homes are mostly houses and bungalows rather than flats, from older cottages to newer builds. Sealant and grout wear out here just as they do in a big town.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Angmering (BN16)
- Region
- West Sussex
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Also in Angmering
How it works
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours for a typical bath or shower, longer where several layers have been applied. Parking around Angmering is normally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Mention any parking rules near the property
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Related advice
Honest limits
We won’t take on work that will not last, so these are the limits:
- A leaking trap, valve or supply pipe
- Water damage behind tiles that needs a tiler
- Sealant in an older building that needs testing for asbestos first
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Failed movement joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Expansion joints
FAQs for Angmering
Do you work for landlords with property near Angmering station?
Yes. We work for letting agents and landlords as well as householders. You can ring 0345 464 0079 or email us with the details for a clear quote.
Is Angmering within the area you cover?
Yes. Angmering is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you quote for more than one area?
Yes. More than one area can go on one quote.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
My shower still leaks after a reseal. Can you sort it?
Yes. We’ll take all the sealant out, look for why it failed and reseal it properly.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
How long does remedial resealing take?
A little longer than a standard reseal. Most jobs take a few hours.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
What affects the cost of remedial sealant
For a quick quote, just ask. The main things that affect it are:
- How easy the joints are to reach
- The amount of work
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Asking for a quote
To help us quote quickly, please include:
- A few pictures by email, if you can
- The address or postcode of the job
- The type of property
- If someone has resealed it before
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
Signs you need remedial sealant in Angmering
A lot of failed joints have been sealed over rather than replaced. New silicone can’t stick to the old bead, so the new layer peels, and damp and mould settle between them.
Any of these means the joints need attention:
- Sealant that came away because the surface wasn’t prepared
- A shower that leaks however often it’s resealed
- Decorators’ caulk around a bath or shower
- Movement joints that have split or pulled away
If you look after a building such as St Wilfrids Catholic Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
What to look for in a quote
- How hidden problems are handled
- How much experience the applicator has
- What guarantee comes with the work
- Whether they’re fully insured
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What happens if it’s left?
Leaks that are left keep doing damage out of sight: soaked floorboards, ceiling stains below and blown plaster. By comparison, sorting the joint is quick. In a smaller place like Angmering, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and give you a clear price before we start.
Why Angmering clients choose us
- We’re fully insured
- 4.9 on Google from 180+ five-star reviews
- Over 20 years’ experience
- A choice of colours where the product allows
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Keep the room well ventilated
- Check ceilings under showers for marks
- Never seal over old silicone
- Do not point over movement joints
Don’t let anyone seal over it later. New silicone does not bond to old, so the old bead should always come out first.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.